Shop

You are here:
  1. Home
  2. Shop
  3. Page 5

Hilscher CIF 104-DNM

Product Introduction
CIF 104-DNM provides DeviceNet master connectivity for PC/104 embedded computers and industrial controllers. It manages DeviceNet scanning, slave configuration, cyclic I/O exchange, explicit messaging, and diagnostics independently of the host processor. The module is used to integrate embedded PCs, soft PLCs, HMIs, and legacy industrial computers with DeviceNet sensor networks, remote I/O, drives, and valve terminals.

NI CFP-AO-200

Product Introduction
cFP-AO-200 delivers eight isolated current output channels for Compact FieldPoint distributed I/O. It converts digital engineering setpoints from the controller into 0 to 20 mA or 4 to 20 mA field signals for valves, drives, indicators, and other current-loop actuators. The module is suitable for process automation, machine control, and remote I/O applications that require standardized analog output distribution.

NI CFP-AIO-600

Product Introduction
cFP-AIO-600 performs combined analog measurement and analog current output in one Compact FieldPoint module. It acquires voltage or current signals from transmitters, sensors, and field instruments, converts the values for the controller, and generates isolated 4 to 20 mA or 0 to 20 mA output signals for valves, actuators, and loop controllers. The module is intended for distributed I/O, process control, and rugged industrial data-acquisition systems.

NI CFP-1808

Product Name
National Instruments cFP-1808 Compact FieldPoint eight-slot Ethernet and serial network backplane.
Product Introduction
cFP-1808 is a network interface backplane for Compact FieldPoint I/O. It connects up to eight cFP I/O modules to Ethernet and serial hosts, enabling distributed measurement and control in rugged environments.

Emerson CE4050S2K1C0

Product Name
Emerson CE4050S2K1C0 DeltaV M-series eight-wide I/O interface carrier with carrier shield bar.
Product Introduction
CE4050S2K1C0 is a horizontal I/O carrier for Emerson DeltaV M-series I/O. It provides physical mounting, backplane power distribution, control-network connection, and electromagnetic shielding for up to eight I/O modules or terminal blocks.

Emerson CE4005S2B4

Product Name
Emerson CE4005S2B4 DeltaV Compact CHARM I/O communication module, commonly configured for analog input characterization.
Product Introduction
CE4005S2B4 is documented in supplier and project data as a DeltaV Compact CHARM interface and I/O communication module. It provides intelligent signal characterization, isolation, and HART-enabled analog input processing for DeltaV control and safety architectures.

Berghof CE3CPU-1131

Product Name
Berghof CE3CPU-1131 programmable logic controller CPU module.
Product Introduction
CE3CPU-1131 is a compact industrial CPU for Berghof CE3 automation systems. It executes IEC 61131-3 control programs, communicates with I/O modules, HMIs, and higher-level networks, and supports machine and process automation applications.

FIFE CDP-01-MH

Product Name
FIFE CDP-01-MH moving-sensor center web guide controller.
Product Introduction
CDP-01-MH is a high-precision web guidance controller for moving material webs. It maintains edge, line, or center position of paper, film, foil, textile, and similar rolled materials during unwinding, processing, and rewinding.

Rexroth CDB02

Product Name
Bosch Rexroth CDB02 IndraDrive double-axis BASIC control section.
Product Introduction
CDB02 is a control section for IndraDrive double-axis servo systems. It executes motion control, communication, encoder evaluation, and safety functions, and mates with a compatible IndraDrive power section to form a complete servo axis package.

NI CDAQ-9174

Product Name
National Instruments cDAQ-9174 four-slot USB CompactDAQ chassis.
Product Introduction
cDAQ-9174 is a USB 2.0 data-acquisition chassis that accepts four C Series I/O modules. It provides timing, triggering, counter, analog, digital, and bus-power management for measurement systems in laboratory and industrial environments.

Honeywell CC-PWRB01

Product Introduction
CC-PWRB01 converts AC mains power into regulated 24 VDC for C300 controllers, Series C I/O modules, and field termination assemblies. It is designed for continuous-process control rooms and harsh industrial cabinets where power redundancy and short-term battery backup are required.

GESAS CAN-DCM

Product Introduction
GESAS CAN-DCM provides reliable controller-area-network communication for industrial automation, motor control, and distributed I/O applications. The interface version connects PLCs, sensors, actuators, and supervisory computers over CAN. The motor-control version converts CAN commands into analog drive signals and returns motor feedback to the host controller.