Shop

You are here:
  1. Home
  2. Shop
  3. Page 225

Kollmorgen S70602-NA

Product Introduction
The S70602-NA is a high-performance, compact digital servo drive from the S700 series, designed for demanding dynamic applications. The "-NA" suffix typically denotes a base unit with no expansion cards installed but includes onboard EtherCAT and CANopen.

Kollmorgen 63032-01B LS2000

Product Introduction
The LS2000 series is a robust, earlier-generation analog/digital hybrid servo drive platform. The 63032-01B module is designed for medium-power motion control, offering stable performance in harsh industrial environments. It is commonly found in older automation systems still in active production.

Kollmorgen S60300-550

Product Introduction
The S60300 is a member of the Kollmorgen SERVOSTAR S600 series, a fully digital servo amplifier designed to control AC synchronous and asynchronous servo motors. It is a legacy product known for robust performance in industrial retrofits.

Kollmorgen AKM33H-ACMNR-00

Product Introduction
A compact, high-dynamic brushless servo motor from the AKM series, optimized for applications with space constraints but requiring high speed and precision. It features low inertia for rapid acceleration.
Technical Specifications
  • Stall Torque: 2.88 Nm continuous

Kollmorgen AKM54H-ACCNR-00

Product Introduction
This is a high-performance brushless servo motor belonging to the Kollmorgen AKM series, designed for demanding industrial motion control applications requiring high torque density and smooth operation. It provides optimized performance when paired with Kollmorgen SERVOSTAR or AKD series drives.

Kollmorgen N-S1-UG0-NNNN

  • Product Name: N-Series ServoDisc DC Servo Motor
  • Product Introduction: Ironless disc-armature DC servo motor utilizing an axial magnetic field for zero cogging and extremely low inertia, ideal for high-acceleration applications.

Kollmorgen MSK050C-0300-N

  • Product Name: MSK IndraDyn S Synchronous Servo Motor (Size 050, Length C)
  • Product Introduction: Compact permanent magnet synchronous motor optimized for high dynamic performance in limited space, often used in robotics and packaging.

Kollmorgen AKM53K-ANCNDB00

  • Product Name: AKM5 Series Servo Motor (Frame Size 53, Length K)
  • Product Introduction: High-performance brushless permanent magnet synchronous servo motor designed for demanding industrial motion control applications requiring high torque density and low cogging.

Kollmorgen S61001-S / S61001-SE

Product Introduction:​ Kollmorgen S600 (also called S61000 series) digital servo drives were the predecessor to AKD, offering high-bandwidth torque/velocity control for brushless servo motors. S61001 = base model with specific I/O & power section. "-S" typically = standard I/O; "-SE" = with enhanced EMC filtering or export config. These are now largely obsolete but still supported in many legacy machines. [citation:15 context]

Kollmorgen B-204-C-99-S-2-46

Product Introduction:​ Kollmorgen "B" series frameless brushless motor kits (historically Goldline® BLM / ULT/ULT-true frameless). B-204 = frame size 204 (approx. bore & OD per Kollmorgen frameless dimension tables — typically ~200 mm outer diameter, ~70–100 mm ID depending on exact series). "C" = stator/rotor pair; "99" = custom winding/specification; "S" = shaft/hub config or special; "2-46" = stack length or magnet config. These are component-level kits, not housed motors.

Kollmorgen CR03260

Product Introduction:​ Kollmorgen "CR" prefixed part numbers typically denote pre-assembled cable sets or accessories. CR03260 is commonly a motor interconnect cable​ (power + feedback combined or separate) for AKM series servo motors — M23 angled male to drive-end or junction box, specified length and pinout. Exact pinout depends on motor feedback type (encoder vs resolver vs SFD).

Kollmorgen AKM31H-ANCN2-00

Product Introduction:​ AKM31 is a compact 70×70 mm flange (IEC size) permanent-magnet synchronous brushless servo motor. "H" winding = medium voltage/high speed. "ANCN2-00" decode: A-side standard flange, smooth (no key) shaft, N-side standard tolerance, C = incremental encoder (Hall-effect ComCoder, 2048 pulses/rev), N = no holding brake, 2 = connector orientation (angled M23), 00 = standard.