Shop

You are here:
  1. Home
  2. Shop
  3. Page 771

GE IS220PTURH1A

Technical Specifications
 
  • Input Voltage: 24 VDC
  • Output Voltage: 24 VDC
  • Current: 5 A
  • Communication: Dual 100Mb full - duplex Ethernet ports
  • Operating Temperature: - 40 °C to + 85 °C
  • Storage Temperature: - 55 °C to + 90 °C
  • Humidity: 5% to 95% RH, non - condensing
  • Vibration: 0.03 g rms, 5 Hz to 500 Hz
  • Shock: 15 g, 20 ms half - sine

Woodward PEAK200-HVAC 8200-1501

Technical Specifications
 
  • Input Voltage: Usually 24V DC or 120V AC, depending on the model configuration.
  • Working Temperature Range: - 40°C to + 70°C.
  • Protection Level: IP20 or higher.
  • Output Signal: Analog (4 - 20mA) or digital (relay output).

BENTLEY 3500/65 145988-02

Technical Specifications
 
  • Power Input: 115V AC or 230V AC
  • Output Power: 24V DC, 10A
  • Power Consumption: 5W
  • Channel Input: Connect to vibration sensors
  • Signal Output: Support analog and digital signals
  • Communication: Support Ethernet and RS - 232 communication
  • Working Temperature Range: - 40°C to + 85°C
  • Working Humidity: 5% - 95%
  • Protection Level: IP67
  • Channel Expansion Capacity: Can be expanded to 32 channels

SAACKE FSC-01

Technical Specifications
  • Safety Integrity Level: SIL 3 according to IEC 61508.
  • Compliance Standards: DIN EN 298, DIN EN 230, Pressure Equipment Directive 97/23/EC, Gas Appliances Directive 2009/142/EC.
  • Channels and Modes: In the basic version, it has 8 fail - safe channels, 4 operating modes, and up to 4 integrated controllers.

PARKER AR-04AE-13574

Technical Specifications
 
  • Maximum Output Power: 400W (continuous current @ 240VAC)
  • Rated Output Power: 1.1kVA
  • Input Power: Single - phase 120/240VAC
  • Feedback Options: Square - wave incremental encoder, Heidenhain EnDat absolute encoder
  • Command Interface Options: ±10V, Pulse/Direction, Ethernet PowerLink
  • Certifications: CE (EMC and LVD), UL approved

BENDER IRDH575B1W-435

Technical Specifications
 
  • Rated Insulation Voltage: AC 800V
  • Rated Impulse Voltage/Pollution Degree: 8kV/3
  • Nominal System Voltage: AC, 3/(N)AC 20 - 575V; DC 20 - 575V; AC, 3/(N)AC 340 - 760V; DC 340 - 575V
  • Power Supply Voltage: 88 - 264V AC, 42 - 460Hz; DC 19.2 - 72V
  • DC Internal Resistance: ≥180k
  • Positioning Current DC: 1/2.5/10/25/50 mA
  • Operating Temperature Range: -10 - +55°C (working); -40 - +70°C (storage)
  • Protection Class: IP30 (internal components); IP20 (terminals); IP40 (for installation door); IP42 (for installation door with sealed panel); IP65 (for installation with transparent front - plate cover)
  • Weight: ≤900g

GE PQMII-T20

Technical Specifications
 
  • Voltage Measurement
    • Range: 100 V to 600 V phase-to-phase (direct connection); up to 34.5 kV with current transformers (CTs) and voltage transformers (VTs)
    • Accuracy: ±0.1% of reading (for voltage, current, power)
  • Current Measurement
    • Range: Up to 5 A (direct connection); scalable with CTs (up to 10,000 A)
    • Accuracy: ±0.1% of reading
  • Power Measurement
    • Active Power: ±0.1% of reading
    • Reactive Power: ±0.2% of reading
    • Apparent Power: ±0.1% of reading

DEIF DLQ144-PC-NB

Technical Specifications
  • Input Voltage: ±10V
  • Load: 9k ohm
  • Illumination Voltage: 24V AC/DC
  • Measurement Range: 0 - 100% pitch
  • Weight: 630 gm

KONGSBERG MRU-E-JB3

Technical Specifications
 
  • Roll and Pitch Output
    • Angle Range: ±45 degrees
    • Angular Velocity Range: ±100 degrees/second
    • Resolution: 0.001 degrees
    • Angular Velocity Noise: 0.1 degrees/second RMS
    • Static Accuracy: 0.08 degrees RMS
    • Dynamic Accuracy (±5° Amplitude): 0.08 degrees RMS
    • Scale Factor Error: 0.5% RMS

EATON XV-112-DB-70TWRC-00

Technical Specifications
 
  • Power Supply: 24V DC.
  • Operating Voltage: 24V.
  • Output Current: The maximum output current is 3A/phase.
  • Display: 7 - inch TFT color display with WVGA resolution.
  • Communication Interfaces: Ethernet interface, USB device, RS232, Profibus/MPI, and it also supports 2 CAN interfaces for communication with PLC.
  • Control Modes: Supports protocol position control, speed control, and periodic position control modes.
  • Encoder Resolution: The servo motor encoder can be optionally 20BIT or 17BIT resolution, and the standard is 2500 lines.
  • Pulse Input Frequency: Up to 4MPPS.
  • Speed Frequency Response: Can reach 1200HZ.
  • Overload Capacity: Up to 3 times.

ALSTOM EP3-E-4-A

Technical Specifications
 
  • Communication Protocols: Supports multiple protocols such as Ethernet, CAN, and Modbus for versatile integration.
  • Connectivity: Equipped with multiple input/output ports for connecting various devices and systems.
  • Operating Voltage: Typically rated for 24V DC.
  • Output Voltage: 0 - 10V DC.
  • Current Rating: 4A.
  • Operating Temperature: - 40℃ - + 85℃.
  • Mounting: Can be easily mounted in standard enclosures or on DIN rails.
  • Weight: Approximately 1 kg.

Fireye 45UV5-1101

Compatibility & Integration

  • Controllers: Fireye BurnerLogix™, D-Series, MicroM, and Flame Monitor™ systems.
  • Burner Types: Single-point monitoring for manual, semi-auto, or fully automatic burners.
  • Fuels: Natural gas, diesel, propane, kerosene (not for hydrogen/solar flames).