Shop

You are here:
  1. Home
  2. Shop
  3. Page 672

AEG D984-385 984 385D Modicon 984 PLC Processor Module

  • Product Introduction: AEG D984-385 (also known as 984 385D) is a high-performance processor module from the Modicon 984 series, designed for large-scale industrial automation with demanding processing and memory requirements. It supports hot standby configurations for mission-critical applications.
  • Technical Specifications:
    • CPU: 16-bit processor (10 MHz)
    • Memory: 64 KB RAM (expandable up to 128 KB), 10 KB EEPROM
    • I/O Capacity: Up to 8192 digital I/O points, 2048 analog I/O points
    • Communication Interfaces: RS-232, RS-485, Profibus-DP, Modbus TCP/IP
    • Hot Standby Support: Yes (with R911-000 Hot Standby system)

AEG MM-PMC2-400 Modular Operator Interface Panel

  • Product Introduction: AEG MM-PMC2-400 is a high-performance operator interface panel from the Modicon series, featuring a larger display and enhanced processing capabilities for complex automation applications. It supports advanced graphics and multimedia for intuitive user interaction.
  • Technical Specifications:
    • Display: 15-inch color TFT LCD (1024 x 768 resolution)
    • Input Methods: Capacitive touchscreen and mechanical keypad
    • Communication Interfaces: RS-232, RS-485, Ethernet (2 ports), USB (2 ports)
    • Memory: 512 MB RAM, 1 GB Flash
    • Power Supply: 110/230 V AC (50/60 Hz)
    • Operating Temperature: 0°C to +50°C

AEG ASP890300 Modicon 800 Series Remote I/O Processor

  • Product Introduction: AEG ASP890300 is a remote I/O processor from the Modicon 800 series, enabling communication between a central PLC and remote I/O racks over coaxial cable. It provides a reliable and high-speed interface for distributed I/O systems.
  • Technical Specifications:
    • Communication Medium: 75-ohm coaxial cable (F-type connector)
    • Communication Rate: 1.544 MHz
    • I/O Scan Time: <5 ms for 256 I/O points
    • Power Supply: Selectable 115/230 V AC (50/60 Hz) or 24 V DC
    • Power Consumption: 115 V AC (1.1 A), 230 V AC (0.65 A), 24 V DC (4 A)

AEG 557VIC12620 Variable Frequency Drive (VFD)

  • Product Introduction: AEG 557VIC12620 is a variable frequency drive designed for precise speed control of three-phase AC motors. It offers energy-efficient motor operation with advanced control algorithms for optimal performance in various industrial applications.
  • Technical Specifications:
    • Power Rating: 15 kW (20 HP)
    • Input Voltage: 380-480 V AC (3-phase, 50/60 Hz)
    • Output Voltage: 0-480 V AC (3-phase)
    • Output Frequency: 0-600 Hz
    • Control Modes: V/f control, vector control (sensorless), torque control

AEG AM-C986-004 Integrated Control Processor

  • Product Introduction: AEG AM-C986-004 is a high-performance integrated control processor for the Modicon 984B PLC series, designed for large-scale industrial automation with demanding processing requirements. It supports hot standby configurations for mission-critical applications.
  • Technical Specifications:
    • CPU: 10 MHz Intel processor
    • Memory: 256 KB SRAM (expandable up to 96 KB extended data memory)
    • I/O Capacity: Up to 8192 digital I/O points, 1024 analog I/O points
    • Communication Interfaces: RS-232, RS-485, Profibus-DP
    • Hot Standby Support: Yes (with R911-000 Hot Standby system)

AEG 411 02/110CPU41102 Modicon 411 PLC Control Unit

  • Product Introduction: AEG 411 02/110CPU41102 is a compact PLC control unit from the Modicon 411 series, ideal for small to medium-sized automation applications. It combines a CPU module with integrated I/O for cost-effective and space-saving control solutions.
  • Technical Specifications:
    • CPU: 32-bit RISC processor (100 MHz)
    • Memory: 1 MB Flash, 512 KB RAM (expandable up to 2 MB)
    • I/O Configuration: 24 digital inputs (24 V DC), 16 digital outputs (24 V DC, 16 A per channel)
    • Communication Interfaces: RS-485 (Modbus RTU), Ethernet (Modbus TCP/IP), CANopen

AEG MM-PMC2-300 Modular Operator Interface Panel

  • Product Introduction: AEG MM-PMC2-300 is a human-machine interface (HMI) panel designed for real-time monitoring and control of industrial processes. It features a color display and intuitive input methods for operator interaction with PLCs and other control devices.
  • Technical Specifications:
    • Display: 10-inch color TFT LCD (800 x 480 resolution)
    • Input Methods: Touchscreen (resistive) and membrane keypad
    • Communication Interfaces: RS-232, RS-485, Ethernet, USB
    • Memory: 256 MB RAM, 512 MB Flash
    • Power Supply: 110/230 V AC (50/60 Hz), 24 V DC (optional)

AEG AS-9715-001 Analog Input Module

  • Product Introduction: AEG AS-9715-001 is an analog input module for the Modicon 800 series, used to convert analog signals from sensors (e.g., temperature, pressure, flow) into digital data for processing by PLCs. It offers high precision and stability for critical measurement applications.
  • Technical Specifications:
    • Number of Channels: 8 differential analog inputs
    • Input Signal Types: 4-20 mA, 0-10 V DC, thermocouples (Type J, K, T, E), RTD (PT100)
    • Resolution: 16-bit
    • Accuracy: ±0.1% of full scale
    • Sampling Rate: 100 samples per second per channel
    • Isolation: Channel-to-channel isolation (500 V AC)

AEG MM-FMC3-010 Modular Fieldbus Communication Module

  • Product Introduction: AEG MM-FMC3-010 is a fieldbus communication module under Schneider Electric's AEG Modicon series, designed to enable data exchange between field devices and upper-level control systems in industrial automation environments. It supports multiple fieldbus protocols for seamless integration into distributed control systems.
  • Technical Specifications:
    • Communication Protocols: Profibus-DP, CANopen, Ethernet/IP, Modbus TCP/IP
    • Communication Rate: Up to 12 Mbps (Profibus-DP), 1 Mbps (CANopen), 100 Mbps (Ethernet/IP)
    • Number of Communication Ports: 2 x RS-485, 1 x Ethernet (RJ45), 1 x CAN
    • Power Supply: 24 V DC (1.2 A typical)

AEG NW-BP85-000 Modicon Network Backplane Bus Module

  • Product Introduction: This is an industrial-grade network backplane bus module for AEG Modicon NW series PLC systems, serving as the core communication hub and backplane bus controller for multi-module PLC chassis. It integrates an 8-slot high-speed backplane bus, 10/100 Mbps Ethernet ports (Modbus TCP/IP), and bus redundancy functions, realizing high-speed data exchange between installed PLC modules (CPU, I/O, communication, special function) and seamless connection with the upper industrial control network (SCADA, HMI, MES). The module is designed for medium and large-scale industrial automation systems, providing a reliable, scalable and high-speed communication foundation for centralized control and distributed I/O networking of Modicon NW series PLCs.
  • Technical Specifications:
    • Slot Configuration: 8 standard slots, supporting hot-swappable installation of Modicon NW series CPU, I/O, communication and special function modules.
    • Backplane Bus: 32-bit high-speed synchronous bus, data transmission rate 1 Gbps, ensuring low-latency data exchange between modules.
    • Ethernet Interfaces: 2×10/100 Mbps RJ45 ports (Modbus TCP/IP), supporting auto MDI/MDIX, port redundancy and network fault self-healing.
    • Network Protocols: Modbus TCP/IP, TCP/IP, UDP/IP, supporting communication with upper SCADA, HMI and MES systems.

AEG AS-02MP-000 Modicon Auxiliary Motion & Process Processing Module

  • Product Introduction: This is a dedicated auxiliary processing and interface module for AEG Modicon 800 series PLC systems, engineered to offload specialized motion control and complex process calculation tasks from the main PLC CPU, enhancing the overall system’s processing efficiency and real-time performance. It integrates a dedicated motion processing core, analog/digital signal preprocessing circuits, and high-speed I/O interfaces, supporting simple motion control (single-axis positioning, speed regulation) and advanced process data analysis (filtering, scaling, PID pre-calculation). The module acts as a co-processor for the main CPU, enabling the Modicon 800 series to handle mixed control tasks of logic, motion, and process in industrial automation scenarios, and is a key expansion component for improving the PLC system’s multi-task processing capability.
  • Technical Specifications:
    • Processing Core: 16-bit dedicated motion/process processor, operating frequency 40 MHz, independent of the main CPU.
    • Supported Control Tasks: Single-axis stepper/servo motor positioning, speed regulation (0-5000 RPM), analog signal preprocessing (filtering, linearization, scaling), PID loop pre-calculation (up to 8 loops).
    • High-Speed I/O Interfaces: 2×high-speed pulse output (PTO, 0-100 kHz) for motion control, 2×high-speed counter input (0-100 kHz, incremental encoder compatible).

AEG Modicon AS-02MP-000 Auxiliary Processing Circuit Board

Functional Features

  • Stable Signal Processing: Capable of sorting, buffering, and distributing signals inside the industrial control system. It ensures smooth communication between controllers and accurate execution of instructions, reducing signal interference and transmission errors in complex industrial electromagnetic environments.
  • Clear Functional Positioning: It can serve as an interface adapter, data transmission hub, or functional expansion unit according to actual application requirements. It can effectively connect the main control board with external devices, realizing data exchange and functional extension.
  • Industrial - Grade Reliability: Adopting high - temperature - resistant and anti - interference electrical structure design. It can maintain stable performance in harsh industrial sites with strong electromagnetic interference, high temperature, and high humidity, and has a long service life.
  • Compact and Easy Integration: The small - sized layout allows for easy installation inside the rack or next to other control modules. It can be seamlessly integrated with the Modicon series control system without occupying excessive space.
  • Simple Maintenance: The modular design enables plug - and - play replacement. When a fault occurs, the board can be quickly replaced by plugging and unplugging it on the rack or motherboard, greatly improving maintenance efficiency and reducing system downtime.
  • Low Power Consumption: The power consumption is less than 2W during operation, which helps to reduce the overall power consumption of the control system and meet the energy - saving requirements of modern industrial equipment.