Product Name: Yokogawa SDV531-SS3 — Smart Valve Positioner / Digital Valve Controller (SDV500 Series) Product Introduction: The SDV531-SS3 is a smart valve positioner and digital valve controller from Yokogawa's SDV500 series. It is designed for on/off valve control and modulating valve position control with advanced diagnostics. The SS3 suffix indicates Stainless Steel housing with 3-wire configuration.
Product Name: Yokogawa MV2MV208-3-2-1 — Smart Valve Positioner (MV2 Series) Product Introduction: The MV2MV208-3-2-1 is a smart electro-pneumatic valve positioner from Yokogawa's MV2 series. It is designed to precisely control the position of pneumatic control valves. The model code 3-2-1 specifies the configuration: 3 = positioner type, 2 = signal type, 1 = actuator type/option.
Product Name: Yokogawa DM1C-004F-1A6A — Digital Input Module (CENTUM CS3000/VP) Product Introduction: The DM1C-004F-1A6A is a 4-channel digital (discrete) input module for Yokogawa's CENTUM CS3000/VP distributed control system. It provides 4 channels of digital input for monitoring on/off status, alarm contacts, and switch signals from field devices. The 1A6A suffix defines the specific input configuration (sourcing/sinking, voltage levels, contact type).
Product Name: Yokogawa F3DA04-1N — Analog Input Module (F3 Series Fieldbus I/O) Product Introduction: The F3DA04-1N is a 4-channel analog input module from Yokogawa's F3 Fieldbus I/O series, designed for use with the CENTUM VP and CS3000 distributed control systems (DCS). It provides 4 channels of analog input for acquiring process signals from field instruments. The -1N suffix indicates the specific input type and configuration (4–20mA, 2-wire transmitter).
Product Name: Yokogawa DX220-3-2/A — Chart/Graphic Recorder (DX2000 Series) Product Introduction: The DX220-3-2/A is a chart and graphic recorder from Yokogawa's DX2000 series. It is designed for recording process data on chart paper, providing a reliable hard-copy record of industrial process variables. The configuration 3-2 indicates 3 recording channels with 2 recording pens, and /A denotes the specific variant/output configuration.
Product Introduction: The NFDR541-PS2 is a dedicated industrial cybersecurity firewall manufactured by Yokogawa Electric Corporation. It belongs to the FA-M3 Network Security product line and is specifically engineered to protect Factory Automation (FA) networks and industrial control system (ICS) environments from cyber threats while maintaining uninterrupted industrial operations. The device provides deep packet inspection, access control, and intrusion prevention tailored for industrial protocols.
Product Introduction: The NFDV161-P50-NFDV1 is a digital vortex flowmeter from Yokogawa's NFDV160 series. The NFDV161 indicates the transmitter model. The P50 specifies the vortex shedder (sensor) size: P50 = 50 mm nominal pipe size (DN50, 2-inch). The NFDV1 at the end confirms the converter/transmitter model. This flowmeter measures volumetric flow rate of liquids, gases, and steam using the vortex shedding principle.
Product Introduction: The SR1015B85-2MN*1C/L1D99078 is a 10-channel universal input paperless recorder from Yokogawa's SR1000 series. The model code decodes as: SR1000 = SR1000 series, 10 = 10 input channels, 15 = 1/8 DIN (96 × 96 mm) front panel, B85 = specific configuration, 2MN = 2-point Modbus TCP/IP network, *1C = specific serial/option, L1D99078 = serial number. This is a high-channel-count recorder with dual Ethernet ports for network redundancy.
Product Introduction: The ANR11D-411/NDE is a 4-channel universal input paperless recorder from Yokogawa's ANR11 series. The D suffix indicates a 96 × 96 mm (1/8 DIN) square front panel. The 411 code specifies 4 universal input channels + 1 alarm output channel. The NDE suffix indicates Ethernet communication option (10/100 BASE-T). This recorder provides trend recording, alarm management, and remote monitoring via Ethernet.
Product Introduction: The UR1BG3-060N-6K C-2TA-N is a 6-axis collaborative robot (cobot) from Yokogawa's UR1 series, designed for safe human-robot collaboration in manufacturing and assembly environments. The model code decodes as: UR1 = UR1 series, BG3 = Controller configuration, 060N = 6-axis, N-series arm, 6K = 6 kg payload, C = Cabinet-mounted controller, 2TA-N = specific I/O and option configuration.
Product Introduction: The MW100-E-1D-SS3/M1/M3 is a digital weight transmitter from Yokogawa's MW100 series, designed for weighing applications in hazardous (explosive) areas. The E suffix denotes explosion-proof (Ex d) certification. The 1D option indicates 1-channel (single weight) digital indication/transmission. SS3 specifies 316L stainless steel housing for maximum corrosion resistance. M1/M3 are specific output/communication options.
Product Introduction: The UT55A000-11-00 is a single-loop digital indicating controller from Yokogawa's UT55A series. It is the most basic configuration of the UT55A family, providing process variable indication only with no control output, no alarm outputs, and no communication. The model code 000-11-00 decodes as: 000 = basic type, 11 = DC 4–20 mA input, 00 = no output option.
