Siemens

You are here:
  1. Home
  2. Siemens

SIEMENS 6ES5 314-3UA11

Product Name:​ Siemens 6ES5 314-3UA11 IM314 Expansion Unit Interface Module
Product Introduction:​ This module is part of the SIMATIC S5 system and provides expansion-unit bus interfacing between a central controller and remote I/O racks. It is installed on the expansion side and works with IM304 in the central controller rack.

Siemens 6GT2800-5DA00

Product Name
SIMATIC RF300 RF380T heat-resistant RFID transponder.
Product Introduction
This transponder is a rugged RF300 data carrier for high-temperature identification. It is designed for skid and object tracking in paint shops, drying ovens, cataphoresis lines and other thermal process areas where standard tags cannot survive. The device stores process data on the tag and communicates with compatible RF300 readers without batteries.

Siemens 6SC6108-0SN00

Product Introduction
This module is a power-stage assembly within the SIMODRIVE 610 analog servo drive system for CNC machine-tool feed axes. It amplifies DC-bus energy into three-phase AC output for feed servo motors under command from the associated SIMODRIVE 610 control or regulation electronics. Available documentation describes both single-axis power boards and three-axis power-circuit boards under the 6SC6108-0SN00 number; configuration depends on the complete drive chassis and control board pairing.

Siemens 6GK5212-2BB00-2AA3

Product Name
SCALANCE X212-2 managed Industrial Ethernet switch.
Product Introduction
This managed switch delivers high port density with copper RJ45 interfaces and multimode fiber uplinks. It is built for plant-wide PROFINET networks, large machine cells and redundant industrial Ethernet topologies requiring long-distance optical backbone links.

Siemens 6GK5204-0BA00-2AF2

Product Name
SCALANCE XF204 managed flat Industrial Ethernet switch.
Product Introduction
This flat-form managed switch is designed for control-cabinet PROFINET networks with limited width. It provides four 10/100 Mbps copper ports, redundant 24 V DC power, PROFINET IO device integration and managed redundancy functions for compact machine cells and distributed I/O clusters.

Siemens 6ES7716-1CA10-0BA1

Product Name
SIMATIC Field PG M4 Premium portable engineering workstation.
Product Introduction
This is a rugged portable programming device for SIMATIC automation systems. It supports project engineering, PLC programming, HMI configuration, commissioning, diagnostics and maintenance. The device is designed for on-site industrial use and ships with trial engineering software for STEP 7 and WinCC workflows.

Siemens 6ES7630-0DA00-0AB0

Product Introduction
This module expands SIMATIC C7 integrated controller units with additional digital, analog and universal channels. It connects to the C7 internal bus and increases signal handling capacity for machine control, process supervision and compact automation tasks without replacing the base controller.

Siemens 6ES7408-1TA01-0XA0

Product Introduction
This module provides forced air cooling and integrated fan monitoring for SIMATIC S7-400 racks. It is used in high-density central racks, expansion racks and 18-slot configurations where CPU, signal, communication and function modules generate sustained heat. The subassembly supplies airflow, monitors fan speed, reports faults through LEDs and relay contacts, and supports preventive maintenance in industrial control cabinets.

Siemens 6SN1111-0AA00-0DA1

Product Overview​
Passive reactive component used on the line side of servo drive, inverter or active line systems to limit harmonic current, smooth switching transients and support DC-bus stability. Public sources classify the same order number differently, so confirm the exact system family from nameplate, firmware label and host drive documentation.

Siemens 6SM37VL-6000

Product Name​
1FT5 high-speed permanent-magnet AC servo motor, 37-frame high-speed variant.
Product Overview​
Brushless synchronous servo motor designed for high rotational speed, dynamic positioning and applications requiring fast cycle times with encoder feedback and optional holding brake.

Siemens 6SE3214-0DA40

Product Name​
MICROMASTER Vector MMV150/3 unfiltered three-phase AC frequency inverter.
Product Overview​
Compact vector-controlled drive for constant-torque induction motor speed control. Used as a cabinet-mounted replacement or retrofit inverter in legacy MICROMASTER installations.

CONTROL TECHNIQUES 095E3D400BAFCA

Product Name: Unimotor fm Series Brushless AC Servo Motor (095E3D400BAFCA)
Product Introduction: A high-performance 95mm frame brushless AC servo motor from the Unimotor fm series, featuring a D4 winding and integrated brake. It is optimized for applications requiring high continuous torque, reliable holding, and precise motion control in industrial environments.
Technical Specifications:
  • Frame Size: 95mm
  • Voltage Rating: 460VAC
  • Nominal Speed: 3000 RPM