Shop

You are here:
  1. Home
  2. Shop

Fisher DVC2000

Product Name
FIELDVUE DVC2000 Digital Valve Controller
Product Introduction
The Fisher DVC2000 is a compact digital valve controller that receives a 4–20 mA input signal and converts it into a pneumatic output for valve actuators. It is used for throttling and on/off control of industrial control valves.

SAM ELECTRONICS​ EMP2200

Product Name​
Marine central alarm monitoring controller
Product Introduction​
Dedicated marine-grade monitoring controller for integrated vessel machinery surveillance, safety alarm distribution and onboard event logging.

DEIF DLQ144-PC-NB

  • Product Name:​ DEIF DLQ144-PC-NB Marine Analog Pointer Indicator
  • Product Introduction:​ 144×144 mm panel-mount analog meter formerly supplied by Norcontrol; displays ±10 VDC differential signals on customizable dials for ship and industrial panels.

Parker DLD13004R

  • Product Name:​ Parker DLD13004R DIGIVEX DLD Digital Servo Drive
  • Product Introduction:​ Compact panel-mount DC servo amplifier from Parker SSD/Parvex for brushed DC servomotors in speed or torque mode.
  • Technical Specifications:​ 230 VAC ±10% input; 130 VDC-class armature; 4 A continuous / 12 A peak; ±10 V analog command; resolver feedback standard, encoder optional; RS-232 debug, optional CANopen.

SCHIELE DL22N-22

  • Product Name:​ SCHIELE DL22N-22 Industrial Control Relay / Contactor Module
  • Product Introduction:​ Electromagnetically operated low-voltage switching device with 2 NO + 2 NC auxiliary contacts for control circuits, motor control and signalling.
  • Technical Specifications:​ 24 VDC / 230 VAC coil options; contact capacity ~2 A / 250 VAC; IP20; −25…+55 ℃; 35 mm DIN rail or screw mount.

SIGMATEK DKL062

  • Product Name:​ SIGMATEK DKL062 DIAS Digital Input Module
  • Product Introduction:​ Compact SIGMATEK DIAS digital input terminal for acquiring 24 VDC sensor and contact signals into the DIAS control system.
  • Technical Specifications:​ 24 VDC nominal; DIAS backplane-powered; galvanic isolation between field and bus.

SIGMATEK DKL032

  • Product Name:​ SIGMATEK DKL032 8-Channel Digital Input Module
  • Product Introduction:​ High-density 24 VDC digital input module for the SIGMATEK DIAS system; acquires dry-contact or PNP source-type sensor signals.
  • Technical Specifications:​ 8 DI, 24 VDC; 20.4–28.8 VDC range; ≥15 V high / ≤5 V low; 2.5–3 mA per channel; 3 ms filter (software-adjustable); 500 V isolation; ~60 mA at 5 VDC backplane; 8 green LEDs.

SIGMATEK DKL002

Product Name
SIGMATEK DKL002 2-Channel Digital Input Module
Product Introduction
SIGMATEK DKL002 is a compact DIAS-bus digital input terminal. It acquires two 24 VDC binary signals from sensors, switches or pushbuttons and transfers isolated status data to the central SIGMATEK CPU.

Rexroth Indramat DKCXX

Product Name
Bosch Rexroth Indramat DKCXX Series DKC Drive Controller
Product Introduction
DKCXX represents the Bosch Rexroth Indramat DKC servo drive controller family. The controllers convert three-phase AC to regulated servo power through a 700 V DC bus and provide position, speed and torque control for industrial servo motors in machine building, robotics and production automation.

Bachmann DIO280

Product Name
Bachmann DIO280 High-Density Digital Input and Output Module
Product Introduction
Bachmann DIO280 acquires and controls discrete automation signals inside Bachmann M1 control systems. The module concentrates digital inputs, digital outputs, interrupt lines, counters and PWM functions in one rack or DIN-rail interface for machine control, process automation and high-density field wiring.

Galil DMC-4143

Product Introduction​
Independent multi-axis controller with Ethernet, USB, and serial interfaces for industrial motion control.
Technical Specifications​
Up to 8 axes. Ethernet 10/100Base-T. USB port. Auxiliary RS-232. Servo encoder feedback up to 15 MHz. Stepper command up to 3 MHz pulse/direction. 8 universal analog inputs. General I/O 8/8 for 1–4 axes, 16/16 for 5–8 axes. Input voltage 20–80 VDC for certain standalone models.

Galil DMC-4080

Product Introduction​
Standalone or enclosed multi-axis controller for larger automation systems requiring up to eight servo or stepper axes.
Technical Specifications​
Up to 8 axes. Ethernet and serial communication. Supports servo and stepper configurations. Optional internal stepper/servo drive modules depending on version. Extended I/O and breakout boards available.