Shop

You are here:
  1. Home
  2. Shop
  3. Page 491

Bently 330171-00-08-10-02-00

Product Introduction: 11 mm diameter probe for high-stiffness applications where increased resistance to side loading or vibration is required. Offers the same 2 mm linear range as 8 mm probes.
Technical Specifications:
  • Probe Diameter: 11 mm
  • Thread: M14 × 1.5
  • Case Length: 80 mm
  • Total Length: 1.0 m
  • Certifications: None

Bently 330161-02-85-05-94-01-02

Product Introduction: Ultra-slim 5 mm probe for tight radial clearances. Reverse-mount version with 90° connector fits inside small turbine wheels or compressor impellers where axial space is minimal.
Technical Specifications:
  • Probe Diameter: 5 mm
  • Thread: M8 × 1 reverse
  • Case Length: 85 mm
  • Total Length: 1.0 m
  • Connector: 90° miniature coax

Bently 330130-085-02-05

Product Introduction: 8.5 m standard extension for installations where an extra 0.5 m reach is required without stepping up to the next standard length. Fully agency-approved for worldwide use.
Technical Specifications:
  • Length: 8.5 m
  • Impedance: 75 Ω
  • Temperature: –55 °C to +200 °C
  • Approvals: ATEX, IECEx, CSA

Bently 330130-080-12-05

Product Introduction: Combines armor and FluidLoc technologies in one 8 m cable for maximum mechanical and chemical protection. Certified for worldwide hazardous areas.
Technical Specifications:
  • Length: 8.0 m
  • Armor: Stainless-steel interlocked
  • Seal: FluidLoc barrier
  • Approvals: ATEX, IECEx, CSA

Bently 330130-080-10-00

Product Introduction: 8 m cable insulated with perfluoroalkoxy (PFA) for extended temperature exposure up to 260 °C. Ideal for exhaust-gas or steam environments where standard FEP would soften.
Technical Specifications:
  • Length: 8.0 m
  • Insulation: PFA
  • Temperature: –55 °C to +260 °C
  • Impedance: 75 Ω
  • Approvals: None

Bently 330130-080-03-00

Product Introduction: 8 m extension cable with factory-integrated FluidLoc barrier that prevents oil migration along the cable core, safeguarding signal integrity in continuously oil-splashed environments.
Technical Specifications:
  • Length: 8.0 m
  • Seal: FluidLoc internal barrier
  • Impedance: 75 Ω
  • Temperature: –55 °C to +200 °C
  • Approvals: None

Bently 330130-080-00-CN

Product Introduction: 8 m standard extension cable certified to NEPSI Ex ia IIC T4 Ga for immediate acceptance in Chinese hazardous-area plants. Maintains 75 Ω impedance and high-temperature FEP insulation for long-distance signal integrity.
Technical Specifications:
  • Length: 8.0 m
  • Impedance: 75 Ω
  • Capacitance: 69.9 pF/m
  • Temperature: –55 °C to +200 °C
  • Approvals: NEPSI Ex ia IIC T4 Ga, Ex ia IIIC T135 °C Da

Bently 330130-080-01-00

Product Introduction: Heavy-duty 75 Ω triaxial extension cable that connects 3300 XL probes to Proximitor drivers. Factory-fitted with stainless-steel interlocked armor for crush and abrasion resistance in congested cable trays and pipe racks.
Technical Specifications:
  • Length: 8.0 m (26.2 ft)
  • Impedance: 75 Ω ±2 %
  • Capacitance: 69.9 pF/m
  • Armor: Stainless-steel interlocked, 6 mm OD
  • Pull Strength: 330 N (75 lbf)

Bently 330130-080-00-05

Product Introduction: Agency-approved 8 m cable for worldwide hazardous areas.
Technical Specifications:
  • Length: 8.0 m
  • Approvals: CSA, ATEX, IECEx

Bently 330130-080-00-00

Product Introduction: Long-reach 8 m extension for large machines or remote mounting cabinets.
Technical Specifications:
  • Length: 8.0 m
  • Certifications: None

Bently 330130-045-01-CN

Product Introduction: Armored 4.5 m cable with NEPSI Ex certification for Chinese hazardous areas.
Technical Specifications:
  • Length: 4.5 m
  • Armor: Stainless-steel interlocked
  • Approvals: NEPSI Ex

Bently 330130-045-00-05

Product Introduction: Agency-approved 4.5 m cable for worldwide hazardous areas.
Technical Specifications:
  • Length: 4.5 m
  • Approvals: CSA, ATEX, IECEx