Shop

You are here:
  1. Home
  2. Shop
  3. Page 124

YOKOGAWA E204DN-AB1-LS A/FF1/FN1

Product Introduction: The E204DN-AB1-LS A/FF1/FN1 is a multivariable smart transmitter from Yokogawa's EJX series. This model simultaneously measures differential pressure, static pressure, and process temperature from a single process connection. The model code decodes as: E204DN = Multivariable type, AB1 = Output/configuration code, LS = Local display with backlight, A = HART 7 / FF1 = Flange-Flange process connection (DIN), FN1 = Drain/vent fitting. The wetted parts are constructed from Hastelloy C-276 for maximum corrosion resistance.

YOKOGAWA DX-1006-1-4-2

Product Introduction: The DX-1006-1-4-2 is a 6-channel universal input paperless recorder from Yokogawa's DX1000 product line. The model code breaks down as: DX1006 = 6-channel recorder, 1 = single-pen (or specific variant), 4 = 4-digit display, 2 = 2 alarm outputs. This device replaces traditional chart recorders by digitally recording, displaying, and alarming on process variables including temperature, pressure, flow, and level.

YOKOGAWA F3LP02-ON

Product Introduction: The F3LP02-ON is a redundant power supply module for the Yokogawa F3 Series Programmable Logic Controller (PLC). The "LP" designation indicates Line Power (AC input), "02" specifies the output configuration (24 V DC, 2 A per unit), and "ON" indicates the operational status indicator/variant. This module provides dual redundant 24 V DC power to the PLC CPU and I/O racks, ensuring zero-downtime power continuity in critical process control applications.

YOKOGAWA AXFA11G-D1-21

Product Introduction: The AXFA11G-D1-21 is a full-spectrum vibration transmitter from Yokogawa's AXFA product line, designed for continuous online vibration monitoring of rotating machinery. The "11G" indicates the standard vibration measurement range (0 to 11 mm/s velocity or equivalent), "D1" specifies the output configuration (4–20 mA + HART), and "21" denotes the mechanical mounting and process connection variant. This transmitter provides comprehensive spectral vibration data for predictive maintenance programs.

YOKOGAWA S5U709924

Product Introduction: The S5U709924 is a spare hardware module for the Yokogawa CENTUM VP and CENTUM CS 3000 Distributed Control Systems. This part number corresponds to a specific I/O or communication interface card used in the S5 I/O station. The exact module function is defined by the S5U prefix, which denotes a universal I/O or link module for the CENTUM DCS architecture.

YOKOGAWA MW100-E-1H

Product Introduction: The MW100-E-1H is a high-precision weight transmitter from Yokogawa's MW100 product line. The "E" designation indicates the enhanced functionality variant, and "1H" specifies the particular output and configuration code. This transmitter converts the low-level millivolt signal from load cells into a standardized 4–20 mA output with HART digital communication capability.

YOKOGAWA DM1A-100G-1D2A

Product Introduction: The DM1A-100G-1D2A is a high-speed digital measurement module designed for the Yokogawa WT5000 Precision Power Analyzer platform. This module enables simultaneous high-bandwidth sampling of voltage and current signals with exceptional accuracy. It carries CE marking certification (4G2-031-2079/CE), confirming compliance with European safety, health, and environmental protection standards.

Yokogawa ACM12-S1

Product Type: 4-Channel Analog Current (4–20 mA) Input Module Product Overview: The Yokogawa ACM12-S1 is a 4-channel analog input module for the Yokogawa FAI (Fieldbus Interface) and CENTUM series DCS systems. It accepts 4–20 mA DC input signals and converts them to digital values for the DCS controller. The "S1" designation indicates the standard accuracy version with 16-bit resolution.

Yokogawa NFAR181-S50

Product Overview: The Yokogawa NFAR181-S50 is a near-infrared absorption sensor specifically designed for online monitoring of dissolved gases in transformer oil. It detects key fault gases including hydrogen (H₂), methane (CH₄), ethane (C₂H₆), ethylene (C₂H₄), acetylene (C₂H₂), carbon monoxide (CO), and carbon dioxide (CO₂). The "S50" suffix denotes the 50 mm optical path length configuration optimized for transformer oil monitoring.

Yokogawa YS1700-101-A34

Product Overview: The Yokogawa YS1700-101-A34 is a 2-wire vibration transmitter from the YS1700 series. It converts vibration signals from piezoelectric velocity or IEPE acceleration sensors into a 4–20 mA DC output proportional to vibration velocity or acceleration. The "101" indicates the measurement type (velocity, 4–20 mA output), and "A34" specifies the configuration parameters including range and filter settings.

Yokogawa YS1360-121

Product Overview: The Yokogawa YS1360-121 is a field-mounted voice alarm from the YS1360 series configured for continuous tone alarm output with integrated LED beacon. The "121" model code specifies a continuous 105 dB tone with red LED beacon and standard mounting configuration. It is designed for hazardous area installations requiring clear audible and visual alarm notification.

Yokogawa YS1360-021/A05

Product Overview: The Yokogawa YS1360-021/A05 is a field-mounted voice alarm device from the YS1360 series. It combines a high-output speaker with a rotating LED beacon to provide audible and visual alarm indication in hazardous areas. The "021" specifies the sound pattern and volume configuration, and "/A05" denotes the mounting bracket and regional variant.