Shop

AEG MEF004 Industrial Grade Frequency Converter

• Product Introduction: This is a 0.75 kW 3-phase 380 VAC small-power industrial grade frequency converter of AEG, specially designed for the speed control of small-power three-phase asynchronous motors in industrial automation systems. It adopts vector control technology, with high speed control precision, good dynamic performance and comprehensive protection functions, realizing the stepless speed regulation of the motor, energy saving and consumption reduction, and reducing the mechanical impact of the motor start and stop, and is a core speed control component for small-power motor speed control in industrial control systems.
• Technical Specifications:
  • Rated Power: 0.75 kW; Input Voltage: 3-phase 380 VAC ±10%, 50/60 Hz.
  • Output Voltage: 3-phase 0-380 VAC (PWM modulation); Output Current: 2.5 A (rated), 5 A (1-minute overload).
  • Control Mode: V/F control, open-loop vector control (SV-PWM), torque control (optional), speed control precision ±0.5% of rated speed.
  • Frequency Range: 0.1-400 Hz, frequency resolution 0.01 Hz (digital), 0.1 Hz (analog).
  • Start Torque: 150% rated torque at 0.5 Hz (open-loop vector control), 200% rated torque at 5 Hz.
  • Acceleration/Deceleration Time: 0.1-3600 s (adjustable, linear/S-curve).

AEG 6051-042.23966 Industrial Grade Pressure Transmitter

• Product Introduction: This is a high-precision industrial grade pressure transmitter of AEG, with a measured pressure range of 0-10 bar and a standard 4-20 mA current output signal, specially designed for the on-line measurement of gauge pressure of gas, liquid and steam media in industrial process control systems. It adopts a diffused silicon pressure sensor core, stainless steel measuring diaphragm and digital temperature compensation technology, with high measurement accuracy, good stability and strong anti-interference performance, and is a core sensing component for the pressure parameter detection of industrial process control systems.
• Technical Specifications:
  • Measured Medium: Clean gas, liquid, steam (≤150°C), non-corrosive and non-crystallizing medium.
  • Measuring Range: 0-10 bar (gauge pressure), optional range 0-1 bar to 0-100 bar (customizable).
  • Output Signal: 4-20 mA DC two-wire system, load resistance 0-750 Ω (24 VDC power supply).
  • Measurement Accuracy: ±0.1% of full scale (FS) at 25°C, ±0.2% FS over -10°C to +80°C.
  • Zero/Span Adjustment: Digital adjustment (via HART protocol), no mechanical adjustment, high precision.
  • Temperature Compensation: -10°C to +80°C, digital temperature compensation technology, small temperature drift.

AEG AS-J892-101 Modicon High-Speed Counter Module

• Product Introduction: This is an 8-channel high-speed counter module for AEG Modicon 890 series PLC systems, specially designed for the high-speed counting, speed detection and position measurement of industrial field pulse signals from encoders, proximity sensors and other pulse generating devices. It supports a maximum counting frequency of 100 kHz per channel, multiple counting modes and high-speed comparison output, and is a core functional module for realizing high-precision motion control, speed control and position control of the Modicon PLC control system.
• Technical Specifications:
  • Counting Channels: 8 independent high-speed counting channels, each channel supports single-ended pulse input.
  • Counting Frequency: Max 100 kHz per channel (5 VDC/24 VDC pulse signal), support low-frequency pulse (≥1 Hz) compatible counting.
  • Input Signal Type: 5 VDC TTL level, 24 VDC NPN/PNP level (configurable per channel), differential input (optional).
  • Counting Modes: Up counting, down counting, up/down counting (direction signal input), pulse/direction, A/B phase quadrature (1×/2×/4× multiplication).

AEG AS-P890-000 Modicon Process Control CPU Module

• Product Introduction: This is a high-performance process control dedicated CPU module for AEG Modicon 890 series PLC systems, specially designed for complex industrial process control scenarios such as continuous production, batch production and multi-parameter collaborative control. It adopts a 32-bit high-speed industrial processor, large-capacity memory and dedicated process control algorithm library, supports high-precision analog signal processing and complex logic control, and is the core control component for building high-performance industrial process control systems with Modicon PLCs.
• Technical Specifications:
  • Processor: 32-bit RISC industrial high-speed processor, operating frequency 200 MHz, dedicated for process control.
  • Memory: 2 MB user program memory (Flash, non-volatile), 1 MB data memory (RAM, battery-backed), 512 KB process data cache.
  • I/O Capacity: Max 8192 digital I/O points, 1024 analog I/O points, support hot swapping of I/O modules.
  • Analog Processing: 16-bit high-precision analog signal processing, support floating-point arithmetic, sampling rate ≤1 ms per channel.

AEG AS-E60-B Modicon Ethernet Communication Module

• Product Introduction: This is a dedicated industrial Ethernet communication module for AEG Modicon PLC systems, engineered to enable high-speed, reliable Ethernet connectivity for Modicon PLCs, bridging the gap between PLC control systems and upper-level SCADA, HMI, and industrial network platforms. It supports standard industrial Ethernet protocols, realizes real-time data exchange and remote control of PLC systems, and is a core networking component for building integrated industrial automation control networks with Modicon PLCs as the core.
• Technical Specifications:
  • Communication Standard: 10/100 Mbps Fast Ethernet, RJ45 port, auto MDI/MDIX crossover.
  • Supported Protocols: Modbus TCP/IP, Ethernet/IP, UDP/TCP, ICMP, ARP, DHCP (client/server).
  • Communication Distance: Up to 100 meters for twisted pair, extendable via industrial switch.
  • Processor: 32-bit industrial communication processor, dedicated protocol processing.
  • Memory: 256 KB Flash for configuration, 128 KB RAM for real-time data caching.
  • Isolation: 2500 VAC electrical isolation between Ethernet port and PLC backplane bus, surge protection ≥2 kV.

AEG AS-C921-101 Communications Processor

Functional Features

• Multi-Port MODBUS Support: Equipped with 3 MODBUS ports, enabling communication with multiple MODBUS devices simultaneously per scan cycle, enhancing data exchange efficiency. Port 1 is located under the front removable access plate, while Ports 2 and 3 are situated at the bottom of the module.
• Programming Device Compatibility: Establishes a stable communication link between 984A/984B PLCs and programming devices, ensuring smooth program uploading, downloading, and online monitoring.
• ASCII Output Interface: A dedicated port under the front access plate enables connection with P964/965 Data Access Panels and simple ASCII output devices such as printers and display terminals, expanding data display and recording capabilities.
• Flexible P965 Connection: The P965 Data Access Panel can be attached via either the ASCII port or a MODBUS port, offering flexible integration options based on system requirements.
• Robust Environmental Adaptability: Operates reliably in a wide temperature range (-10°C to 50°C) and humidity range (10% - 95% RH), with IP20 protection against dust and solid objects, shock resistance of 10 g for 11 ms, and vibration resistance of 1.5 g at 10-500 Hz, ensuring durability in harsh industrial environments.
• Efficient Data Processing: Facilitates fast and accurate data transmission between different devices, optimizing system response time and operational efficiency.
• Easy Installation: DIN rail mounting design allows for quick and secure installation, saving time and effort during system setup.