Shop

You are here:
  1. Home
  2. Shop
  3. Page 73

GE 369-HI-R-0-0-0-E

  • Product Name: GE Multilin 369-HI High-Impedance Fault (HIF) Detection Relay
  • Overview: A purpose-built configuration of the Multilin 369 platform, engineered specifically for reliable high-impedance fault detection without extensive local control or complex communications. This streamlined variant delivers essential HIF detection in a cost-effective hardware form.

GE IS200VCRCH1A

  • Product Name: GE Mark VI Discrete Input/Output VME Module (VCRC Board)
  • Overview: A double-width VME module serving as the primary Contact Input/Relay Output (VCRC) interface in the GE Speedtronic Mark VI gas and steam turbine management platform. It acquires discrete contact signals and drives heavy-duty relay outputs for real-time turbine protection and control.

GE 151X1233DB02SA02

  • Product Name: GE Energy 151X Series Rev A DC Pitch Converter
  • Overview: A wind-turbine pitch-control DC converter module used in GE wind-turbine pitch systems. It forms part of the electrical path used by the pitch system, working with associated control electronics, power connections, and pitch-drive equipment to provide stable DC power for precise blade pitch adjustment.

GE TED134125

  • Product Name: GE TED Series 125 A, 3-Pole Molded Case Circuit Breaker
  • Overview: A thermal-magnetic molded case circuit breaker from the GE TED series (now under ABB/GE), designed for higher commercial loads. It provides fixed thermal and magnetic trip elements for reliable circuit protection.

GE CR306G004

  • Product Name: GE CR306 270 A Non-Reversing Magnetic Starter
  • Overview: A NEMA Size 5, 300-Line, non-combination open-type magnetic starter from General Electric, designed for full-voltage motor starting applications up to 600 V.
  • Technical Specifications:
    • Amperage: 270 A

GE DS200FCGDH1B

  • Product Name: GE Mark V/VI LCI Gate Distribution & Status Card
  • Overview: A VME-based power electronics interface board used in GE Speedtronic Mark V and Mark VI turbine control systems. It acts as the critical interface between the digital control world and analog power electronics, distributing SCR gate firing signals and monitoring Load Commutated Inverter (LCI) status feedback.

GE IC2812B107DA

  • Product Name: GE IC2812 Series Synchronous Motor Field Contactor (Form B107DA)
  • Overview: A heavy-duty, clapper-type DC field contactor specifically designed for synchronous motor applications. It applies and removes field excitation through two normally open poles and inserts discharge resistance through one normally closed pole. The overlap between NO and NC poles prevents the buildup of high induced voltages in the motor field when excitation is removed.

GE 0517L0325BB-G001

  • Product Name: GE Mark V/VI 32-Channel Digital Input Module
  • Overview: This module belongs to the GE Speedtronic Mark V/VI control system and serves as a standard module for collecting external discrete signals such as pushbuttons, limit switches, relay contacts, and proximity switches.
  • Technical Specifications:
    • Input Channels: 32 channels

GE SKHA36AT0800

  • Product Name: GE Spectra RMS Series SK Frame Molded Case Circuit Breaker
  • Product Introduction: The SKHA36AT0800 is an 800 A, 3-pole molded case circuit breaker from GE's Spectra RMS series, featuring a solid-state electronic trip unit with LSI (Long-Time, Short-Time, Instantaneous) protection, designed for demanding industrial power distribution.

GE 36C774353AAG06

  • Product Name: GE B-Series Bridge Rectifier Stack (Stack 1QL 153 with Ferrites)
  • Product Introduction: The 36C774353AAG06 is a stacked bridge rectifier module in GE's B-Series, adopting a 1QL 153 structure with ferrite rings to suppress high-frequency noise. It performs AC-to-DC conversion in power electronic systems with high current-carrying capability and reliable thermal management.

GE IC3600LRDJ1

  • Product Name: GE Fanuc Series 90-30 PLC 16-Point Relay Output Module
  • Product Introduction: The IC3600LRDJ1 is a 16-point relay output module for GE Fanuc Series 90-30 programmable logic controllers, converting internal PLC logic signals into isolated relay contact switching to drive external loads.

GE DS3810MMAD

  • Product Name: GE 8-Channel Multiplexed Analog Input Module
  • Technical Specifications:
    • Channels: 8-channel multiplexed analog input
    • Input Types: 4-20 mA / 0-20 mA / 1-5 V DC (software configurable)