Shop

You are here:
  1. Home
  2. Shop
  3. Page 91

GE 369-HI-R-B-0-0-H-E

Product Name: Multilin 369 Digital Three-Phase Motor Management Relay
Product Introduction: The 369 is a digital motor management relay that provides protection and monitoring for three-phase motors and their associated mechanical systems. It learns individual motor parameters and adapts to each application. The "HI" denotes high control power (50-300 VDC / 60-265 VAC), "R" denotes RTD inputs for temperature monitoring (bearing, stator, ambient, driven equipment), "B" denotes backspin detection, and "E" denotes enhanced faceplate with enhanced diagnostics.

GE 232A4747NCG1A

Product Name:​ 232A Series Multifunction Motor Protection Relay
Product Introduction:​ The 232A4747NCG1A is a digital multifunction motor protection relay in GE's 232A series, designed for comprehensive protection of medium and low voltage motors. It integrates multiple protection functions including overcurrent, ground fault, overload, undervoltage, overvoltage, phase loss, and locked rotor protection in a single compact device.

GE 173C8413BAG02

Product Name:​ GE 173C Series 2100V 4-Quadrant SCR Stack (Power Semiconductor Stack)
Product Introduction:​ The 173C8413BAG02 is a GE 173C series power semiconductor stack, specifically a 53 mm 2100 V 4-quadrant (4Q) SCR stack assembly. It belongs to GE's extensive line of 173C power modules used in large motor drives, excitation systems, and high-power converter applications.

GE 193X-530BB-G01

Product Name:​ GE Fanuc Output Module (Mark VIe Analog I/O Mixed Module)
Product Introduction:​ The 193X-530BB-G01 is a GE Fanuc output module and also a Mark VIe distributed control system analog I/O mixed processing module. It integrates both Analog Input (AI) and Analog Output (AO) functions in a single module, acquiring field process variables such as temperature, pressure, flow, and level, and outputting control signals to actuators such as regulating valves. This module effectively saves rack slots and reduces system cost.

GE FVK463R

Product Name:​ GE FVK Series Medium-Voltage Vacuum Contactor
Product Introduction:​ The FVK463R is a medium-voltage vacuum contactor in GE's FVK series, utilizing vacuum arc-quenching technology. It is used for motor start/stop control and load switching operations in medium-voltage power distribution systems.
Technical Specifications:
  • Manufacturer: General Electric

GE IS200JPDBG1A

Product Name:​ Mark VI Power Distribution Board (JPDB)
Product Introduction:​ The IS200JPDBG1A (revision IS200JPDBG1ABB) is a Power Distribution Board (functional acronym JPDB) manufactured by GE for the Speedtronic Mark VI turbine control system. It distributes regulated 24 V DC power from system power supply modules to local terminal boards, I/O packs, and control racks within the Mark VI turbine control cabinet, incorporating circuit protection, status indication, and diagnostic feedback.

GE IS200TPROH2C

Product Name:​ Mark VIe HART-Enabled Analog I/O Module (PHRA I/O Pack)
Product Introduction:​ The IS200TPROH2C is a HART-enabled analog input/output module developed by General Electric for the Mark VIe control system. It serves as a critical connection point, providing electrical interfaces between one or two I/O Ethernet networks and analog input/output terminal boards. It combines a standardized processor board (common to all Mark VIe distributed I/O packs) with a customized acquisition board optimized for analog input functionality.

GE IS200VAICH1B

Product Name:​ Mark VI IS200 Analog I/O Board
Product Introduction:​ The IS200VAICH1B (with the extended variant IS200VAICH1BED) is an Analog I/O Board for General Electric's Mark VI turbine control system. It handles mixed analog signal input and output, providing 12 single-ended analog input channels and 6 isolated analog output channels for actuator control within the Mark VI rack.

GE 193X231AAG01

Product Name:​ Universal Amplifier Board (UNIV AMPL BOARD)
Product Introduction:​ The 193X231AAG01 is a General Electric universal amplifier board for GE drive and excitation control cabinets. According to Radwell's catalog, this board is listed as "UNIV AMPL BOARD" and is discontinued by the manufacturer. In the 193X series, this board is used for signal transformation and intermediate logic transmission in motor drives, excitation cabinets, or Speedtronic auxiliary control.

GE IS200BPIBG1AEB

Product Name:​ Bridge Personality Interface Board (BPIB)
Product Introduction:​ The IS200BPIBG1AEB is a Bridge Personality Interface Board (functional acronym BPIB) developed by General Electric for the Mark VI series. It serves as the bridge between the gate driver boards and the associated processing units, providing isolated logic-level signal translation, fault capture, and per-phase/per-gate fault control for IGBT drive circuits.

GE DS200KLDAG1A

Product Name:​ Mark V LED Display Card / Key LED Display Card
Product Introduction:​ The DS200KLDAG1A is a rectangular LED display and key interface card manufactured by General Electric for the Mark V Speedtronic turbine control system. It is deployed in steam, gas, and wind turbine automated drive and control systems to provide operators with visual status indication and local key-switch control.

GE C220LSI

Product Name:​ GE Fanuc Series 90-30 / 90-70 PLC Digital Output Module (Transistor Type)
Product Introduction:​ A 24-point transistor output digital module belonging to GE Fanuc's Series 90-30 / 90-70 PLC local I/O family, designed for discrete signal output in industrial automation control.
Technical Specifications:
  • Module Type:​ 24-point digital output module (transistor type)