Shop

You are here:
  1. Home
  2. Shop
  3. Page 90

GE DS200TCCAG1BAA

TC2000 Analog I/O Terminal Board for GE Mark V Speedtronic systems. It handles mixed analog signal acquisition and output with 16-bit precision and high-speed refresh.
  • Technical Specifications: 16 differential analog input channels (configurable 4–20 mA / ±10 V / RTD / TC); 16 isolated analog output channels (4–20 mA / ±10 V); 16-bit ADC/DAC; ±0.1 % full-scale accuracy; 2 ms channel refresh; 2500 Vrms channel-to-backplane isolation; VME P1/J1 + 50-pin ribbon interface supporting TCQA/VCMI parallel bus; 24 VDC (18–36 V) supply, 12 W typical; –30…+65 °C operating, –40…+85 °C storage; 363 × 124 × 146 mm, 2.9 kg; UL E207685, CE, ATEX Zone 2, SIL2.

GE DS200ADMAH1AAA

Analog-Digital Mixed Daughter Card (ADMA) for the GE Mark V Speedtronic control system. It mounts on top of the DPSC processor board and provides analog signal conditioning, A/D and D/A conversion, and extended digital I/O.
  • Technical Specifications: 12 analog input channels (±10 V / 0–20 mA jumper-selectable); 4 analog output channels (±10 V / 4–20 mA, 12-bit); 8 digital I/O points (24 VDC, optically isolated); 16-bit ADC / 12-bit DAC; ≤100 kSPS/channel sampling rate; 1500 V AC isolation (channel-to-channel and channel-to-ground); input impedance 1 MΩ (voltage) / 250 Ω (current); 24 VDC powered; –20…+65 °C operating; ≈ 0.18 kg; 96-pin European header daughter-card mounting.

GE IS200VSVOH1B

VME Servo Control Board (VSVO) for GE Mark VI Speedtronic turbine control systems. It provides electro-hydraulic servo valve control and LVDT/RVDT position feedback processing for gas and steam turbines.
  • Technical Specifications: 4 independent servo output channels, ±10 V or 4–20 mA (jumper-selectable); 16-bit position resolution with <0.1 % full-scale accuracy; 10 kHz (100 µs) PID loop update; LVDT/RVDT excitation and demodulation at 0–10 kHz carrier; dual 10/100/1000 Mb Gig-E Ethernet ports; 1500 V channel-to-channel and channel-to-ground isolation; +5 V @ 1.5 A, ±15 V @ 0.3 A typical power; 0–60 °C operational, –40–+85 °C storage; ≈ 0.64 kg; CE, UL, RoHS, Zone 2 ready.

GE DS3800NPZA1F1C

Product Name: GE DS3800 Network Processing Adapter
Product Introduction: The DS3800NPZA1F1C is a network processing adapter from GE's DS3800 series, functioning as a frontend network interface processing board for enterprise SAN storage arrays. It provides host access services by exporting storage data via Fibre Channel or iSCSI protocols.

GE DS3800HCMB1C1C

Product Name: GE Mark IV Universal Communication Protocol Board
Product Introduction: The DS3800HCMB1C1C is a universal communication protocol board designed for GE's Mark IV Speedtronic turbine control system. It serves as a critical interface enabling seamless communication between system components in industrial gas and steam turbine applications, integrating with Mark IV controllers, I/O boards, and field devices to support multi-protocol data exchange, diagnostic feedback, and real-time system coordination.

GE IS200VCMIH1B

Product Name: GE Mark VI VCMI Communication Module / VME Communication Interface Board
Product Introduction: The IS200VCMIH1B is a VCMI (VME Communication Interface) module and bus master controller board used in GE's Mark VI Speedtronic turbine control system. It serves as the central communication controller within the VME backplane architecture, coordinating data exchange between I/O boards, controllers, and the GE IONet control network.

GE DS3820PMM

Product Name: GE DS3820 Series Power Supply Module (Mark V / Mark VI Distributed I/O Platform)
Product Introduction: The DS3820PMM belongs to GE's DS3820 series of power supply modules designed for the DS3800/DS3820 distributed I/O platform used in Mark V and Mark VI turbine control systems. It provides stable DC working power to all modules within the I/O rack.

GE CR408D694H61AALAA

Product Name: GE CR408 NEMA Combination Magnetic Motor Starter
Product Introduction: The CR408D694H61AALAA is a NEMA combination non-reversing magnetic motor starter from GE's CR408 series, integrating a motor starter with disconnect means and enclosure for industrial motor control applications. The CR408 designation corresponds to a NEMA Size 2 configuration.

GE DS3800NSCC1E1D

Product Name: GE Speedtronic Mark IV Speed Current Regulator Card
Product Introduction: The DS3800NSCC1E1D is a speed/current regulator card within the GE Speedtronic Mark IV gas turbine control system. It implements the speed governor, current limiter, and acceleration scheduler functions, closing the control loop around turbine speed, generator load, and fuel flow. The card is hardware-based (no firmware) and deterministic, suitable for safety-related speed control.

GE 169C4752G0001

Product Name: GE Fanuc RX3i 8-Channel Analog Input Module
Product Introduction: The 169C4752G0001 is an 8-channel analog input module designed for the GE Fanuc RX3i PLC system. It acquires continuously varying analog signals from the field—such as temperature, pressure, flow, and level (4-20mA or 0-10V)—performs A/D conversion, and transmits the digitized data to the PLC for processing.

GE TED124125

Product Name: GE TED Series Molded Case Circuit Breaker (125A, 4-Pole)
Product Introduction: The TED124125 is a 125-ampere, 4-pole thermal-magnetic molded case circuit breaker from GE's TED frame series, designed for low-voltage power distribution system main and branch circuit protection.
Technical Specifications:
  • Frame Size: 150A / TED

GE IS200BPVDG1BR1

Product Name: Mark VI 13-Slot VME Rack (BPVD)
Product Introduction: The IS200BPVDG1BR1 is a thirteen-slot VME rack designed for the GE Mark VI Speedtronic turbine control system. It serves as the mechanical and electrical backbone into which various Mark VI processor and I/O boards are inserted.
Technical Specifications:
  • Slot Count: 13 slots for connecting boards