Shop

You are here:
  1. Home
  2. Shop
  3. Page 344

Yokogawa NFCP501-W1S1

Product Category: Foundation Fieldbus H1 Communication Interface Module

Overview: The NFCP501-W1S1 is a single-channel Foundation Fieldbus H1 communication processor module for the Yokogawa F3 Series DCS. It serves as the bridge between the F3 control engine and Foundation Fieldbus H1 field devices (transmitters, actuators, valves), enabling full digital fieldbus integration within the CENTUM VP / CS 3000 distributed control system architecture.

Yokogawa F3RZ82-0F

Product Category: Redundant DC Power Supply Module

Overview: The F3RZ82-0F is a dual-redundant 24V DC power supply module rated at 8A output current, designed for the Yokogawa F3 Series DCS I/O carrier system. It provides highly stable, ripple-free DC power to all F3 I/O modules installed in the carrier, with full hot-standby redundancy to guarantee zero power interruption to the control system.

Yokogawa F3YD32-1A

Product Series: F3 Series — Yokogawa CENTUM VP / CENTUM DCS I/O Module Family Product Category: Redundant Digital Output Module

Overview: The F3YD32-1A is a 32-point redundant digital output module belonging to the Yokogawa F3 Series distributed control system (DCS) I/O architecture. It delivers relay-type switching outputs with full dual-redundant configuration to ensure uninterrupted process control in safety-critical and high-availability applications.

Yokogawa UT550‑UT55004

  • Product Name: Yokogawa UT550‑UT55004 Digital Temperature Controller
  • Product Series: UT550 Series High‑Precision Process Temperature Controller
  • Technical Specifications: Temperature measurement range −200 °C‑1800 °C (sensor‑dependent); PID control algorithm; multi‑point temperature control; operating voltage 100‑240 VAC 50/60 Hz; operating temperature 0 °C‑50 °C; protection grade IP65 front panel

Yokogawa S970BG‑NM50*B

  • Product Name: Yokogawa S970BG‑NM50*B Spare Part Power Supply Module
  • Product Series: Yokogawa Centum Series Special Spare Power Supply Unit
  • Technical Specifications: Output voltage 24 VDC; rated output power 50 W; input voltage 100‑240 VAC wide range; operating temperature 0 °C‑60 °C; overvoltage/overcurrent/short‑circuit protection

Yokogawa DIGITAUT450

  • Product Name: Yokogawa DIGITAUT450 Digital Automatic Control Unit
  • Product Series: DIGITAUT Series Integrated Digital Process Controller
  • Technical Specifications: Multi‑parameter integrated control; analog/digital signal input/output; PID control algorithm built‑in; operating voltage 24 VDC/110‑240 VAC optional; operating temperature 0 °C‑50 °C; protection grade IP54

Yokogawa AIP504‑V‑N

  • Product Name: Yokogawa AIP504‑V‑N Communication Interface Module
  • Product Series: Centum VP Series Industrial Communication Module
  • Technical Specifications: Supports V‑Net industrial control network protocol; dual‑port redundant communication interface; communication rate 10 Mbps; operating voltage 24 VDC; operating temperature 0 °C‑60 °C; isolation voltage 1500 VAC

Yokogawa DM1A‑100D‑1D4G2‑031‑2079/CE

  • Product Name: Yokogawa DM1A‑100D‑1D4G2‑031‑2079/CE Digital Servo Drive Module
  • Product Series: DM Series High‑Performance Digital Servo Drive
  • Technical Specifications: Rated power 100 W; input voltage single‑phase 200‑240 VAC 50/60 Hz; control mode position/speed/torque control; compliance with CE certification standard; operating temperature 0 °C‑45 °C

Yokogawa SDV541‑SS3

  • Product Name: Yokogawa SDV541‑SS3 Digital Output Module
  • Product Series: Centum VP Series Digital I/O Module
  • Technical Specifications: 16‑channel digital isolated output; output type relay/transistor; rated output voltage 24 VDC; single‑channel load current ≤0.5 A; operating temperature 0 °C‑60 °C; isolation voltage 2000 VAC

Yokogawa EC401‑BCOUPLER

  • Product Name: Yokogawa EC401‑BCOUPLER Bus Coupler Module
  • Product Series: Centum VP Series Industrial Bus Coupler Unit
  • Technical Specifications: Supports V‑Net industrial bus protocol; operating voltage 24 VDC ±10%; power consumption ≤8 W; operating temperature 0 °C‑60 °C; communication rate 10 Mbps; compliance with IEC 61131‑3 standard

Yokogawa ZR22G‑100‑S‑E‑T‑T‑E‑A

  • Product Name: Yokogawa ZR22G‑100‑S‑E‑T‑T‑E‑A Zirconia Oxygen Analyzer Sensor Probe
  • Product Series: ZR Series In‑situ Zirconia Oxygen Analyzer
  • Technical Specifications: Measuring range 0‑100% O₂; working temperature 0 °C‑850 °C; probe length 1000 mm; output signal 4‑20 mA DC; protection grade IP66; compliance with ATEX explosion‑proof standard

Yokogawa DR1015B512

  • Product Name: Yokogawa DR1015B512 Digital Recorder Module
  • Product Series: DR Series Paperless Recorder Module Unit
  • Technical Specifications: 15‑channel analog/digital signal input; built‑in 512 MB non‑volatile data storage; input signal types include 4‑20 mA DC, 0‑10 V DC, thermocouple, RTD; sampling frequency up to 100 Hz; operating voltage 24 VDC; operating temperature 0 °C‑55 °C