Product Introduction: The UT55A is a compact, high-accuracy digital indicating controller from Yokogawa's UTAdvanced product family. It is designed for temperature, voltage, current, and process signal monitoring with a large 7-segment LED display. The UT55A-040-110 configuration specifies a 4–20 mA input with 100–240 VAC power supply.
Product Type: AC Servo Drive / Amplifier Product Introduction: The AKD41 is a high-performance servo drive from Yokogawa's Sigma-7 motion control product line. It is engineered for precise servo motor control in industrial automation applications, delivering advanced motion control with integrated safety functions, EtherCAT communication, and compact design. The model code AKD41-G6SS-34NNN-E80424*D represents a fully customized configuration.
Description: The PH202G-U is a smart pH/ORP (Oxidation-Reduction Potential) transmitter from the PH202G series. The "U" indicates the universal configuration — compatible with both pH and ORP measurements with automatic sensor type detection. It provides a 4–20 mA DC output with HART 7 communication in a robust, weatherproof enclosure suitable for harsh process environments.
Manufacturer: Yokogawa Electric Corporation Description: The SD10ZZZSD10ZZZ04 is a 4-channel signal distributor/isolator from the SD10 series. The "04" indicates 4 channels. The "ZZZ" fields denote the standard configuration for 4–20 mA DC input and output with channel-to-channel isolation. It is used to distribute a single analog signal to multiple destinations or to isolate signals between different system segments to eliminate ground loops.
Manufacturer: Yokogawa Electric Corporation Description: The SDV53A-SSDV53A-S33 is a smart valve positioner from the SDV53A series. The first "S" indicates single-acting actuator, the second "S" confirms the single-acting configuration, and "S33" specifies the stroke range, signal type, and fail-safe position configuration. It provides precise control of pneumatic actuators with full digital communication capabilities.
Manufacturer: Yokogawa Electric Corporation Description: The YTA610-JA1A2/N is a smart temperature transmitter from the YTA610 series. The "J" indicates J-type thermocouple input, "A1" specifies a 4–20 mA DC output, "A2" denotes HART 7 protocol communication, and "/N" indicates NEMA 4X / IP66 weatherproof enclosure. It is a high-performance, fully digital temperature transmitter with advanced self-diagnostic capabilities.
Manufacturer: Yokogawa Electric Corporation Description: The MW100-E-1DS/C3/M1/Z is an enhanced-type weighing transmitter from the MW100 series. The "E" denotes the enhanced model, "1DS" indicates 1 digital sensor interface (MotoHARP/SAW sensor compatible), "C3" specifies FOUNDATION Fieldbus H1 communication, "M1" defines the 4–20 mA DC + HART output, and "Z" enables automatic zero calibration function. It is designed for high-accuracy weighing applications in industrial processes.
Description: The NFAI143-H50 is an 8-channel analog input module for the CENTUM VP F3 DCS. It accepts 4–20 mA DC signals from field transmitters and converts them to digital data for the F3 fieldbus network. The "H50" designation indicates HART protocol compatibility and a specific configuration for 50-channel system integration (or specific HART communication parameters). It provides high-resolution A/D conversion with built-in diagnostic capabilities.
Description: The NFPW426-50 is a 24 V DC redundant power supply designed to provide reliable, uninterrupted power to field instruments in hazardous and non-hazardous areas. It is part of the NFPW420 series and delivers a maximum output of 50 W. The redundant design ensures continuous operation even if one power source fails. It supports both FOUNDATION Fieldbus (FF) and HART field devices.
Description: The PK200-A73/FF1/AM is a smart temperature transmitter from the PK200 series. The "A73" indicates a J-type thermocouple input (JIS standard), "FF1" specifies a 4–20 mA DC output with HART 7 protocol, and "AM" denotes aluminum junction box mounting (head-mount type alternative). It converts thermocouple signals into a standardized 4–20 mA output with digital HART communication.
Manufacturer: Yokogawa Electric Corporation Description: The DX230-2-2/A4/F1/M1/R1 is a 2-channel universal paperless recorder from the DX2000 series. It replaces conventional chart recorders with a digital TFT color LCD display. The "/2-2" designation indicates 2 input channels and 2 alarm outputs. The "/A4" specifies the alarm configuration, "/F1" the front panel type, "/M1" the communication module, and "/R1" the redundant power supply configuration.
Manufacturer: Yokogawa Electric Corporation Description: The F3CU04-OS/CT is a 4-channel communication terminal module designed for the CENTUM VP F3 Distributed Control System (DCS). It serves as an interface between the operation station and field devices via the F3 fieldbus network. The module enables seamless data exchange, command transmission, and status monitoring between the central control room and distributed field instrumentation.
