Shop

You are here:
  1. Home
  2. Shop
  3. Page 69

GE DS200STBAG1ABB

Product Name: GE DS200STBAG1ABB Mark V High-Reliability Status / Annunciator Board (also referenced as Safety Status Annunciator or high-reliability signal termination board for Mark V).
Product Introduction: This is a GE Mark V DS200-series board. Primary references identify it as a high-reliability safety status annunciator board with SIL 2 certification for critical alarm annunciation in Safety Instrumented Systems (SIS) for turbine control. Some distributors list it as an advanced signal termination / digital interface board for Mark V control systems.

GE F60U00AKHF8LH6

Product Name: GE Multilin F60 Feeder Protection System — Universal Relay (UR) Family.
Product Introduction: The F60 is a state-of-the-art digital protection relay from GE Vernova's Multilin UR series, engineered to deliver comprehensive feeder protection, control, and monitoring capabilities for modern distribution networks. The code F60U-00A-KHF8-LH6 denotes a specific configuration variant with 1A/5A current input, 110/220V voltage input, RS-485 (Modbus RTU) and IEC 61850 Ethernet communications, and 85–265V AC/DC auxiliary power.

GE TB13080BWE09

Product Name: General Electric TB13080BWE09 3-Pole 80 Amp Molded Case Circuit Breaker.
Product Introduction: This is a General Electric TB1 type molded case circuit breaker (MCCB) designed for industrial and commercial power distribution systems requiring dependable overcurrent and short-circuit protection.

GE 12SGC21A1A

Product Name: GE Type SGC 12SGC21A1A — Negative-Sequence Time Overcurrent Relay.
Product Introduction: This is a three-phase negative-sequence time overcurrent relay from GE's Type SGC family, designed to protect generators against possible damage from unbalanced phase currents resulting from prolonged faults or unbalanced-load conditions.

GE 9T92A37

Product Name: GE 9T92A37 Power Autotransformer.
Product Introduction: Based on NSN records for the related 9T92A37G2, this is a power autotransformer — a single-phase to single-phase transformer component. (Note: public catalogs also list the 9T92 base as a GE general-purpose control relay family; the NSN-verified item 9T92A37G2 is a transformer. Confirm exact variant with GE ordering documentation.)

GE DS2020LPPA341A

Product Name: GE DS2020LPPA341A Line Protection Board.
Product Introduction: This is a line protection circuit board developed by General Electric for the Mark V series turbine control system. It is designed to protect the control system from electrical faults such as overvoltage, undervoltage, and short circuits, while providing isolation between the control system and power supply.

GE DS3800NFCB1U1U

Product Name: GE DS3800NFCB1U1U Functional Control / Firing Circuit Board.
Product Introduction: This is a specialized printed circuit board designed for General Electric's Speedtronic™ Mark IV turbine control system — a legacy but still widely deployed platform in gas and steam turbine applications across global power generation and industrial facilities. It serves as a firing circuit control board within the Mark IV DS3800 core rack architecture.

GE THN3365SS

Product Name: GE (ABB) THN3365SS Heavy-Duty Safety Switch / Non-Fusible Disconnect Switch.
Product Introduction: This is a 400A, 3-pole, 600V AC heavy-duty safety switch designed for commercial and industrial environments where reliability and safety are crucial. It is engineered to meet NEMA KS1 requirements and complies with UL Standard 98 and CSA Standard 22.2 No. 4-04, suitable for use as service equipment when installed in accordance with the National Electrical Code.

GE DS200CPCAG1A

  • Product Name: Mark V Contactor Pilot / Test Board (CPCA)
  • Product Introduction: A contactor pilot board designed by GE for its Speedtronic Mark V gas and steam turbine control systems. It receives low-level logic control signals from the main controller and amplifies them into high-current drive signals to actuate power contactors, electromagnetic relays, and intermediate control circuits.

GE 55-186556G004

  • Product Name: 55-1 Series Equivalent 3-Pole Contact Kit
  • Product Introduction: A replacement contact kit from GE's 55-1 series, designed for use with NEMA Size 6 magnetic contactors and motor starters in the 100, 200, and 300 Line product families.
  • Technical Specifications:
    • Brand: General Electric

GE TMQV32225

  • Product Name: TMQV Series 225 A 3-Pole Molded Case Circuit Breaker
  • Product Introduction: A 225 A, 3-pole, bolt-on thermal-magnetic molded case circuit breaker from GE's TMQV series, providing reliable circuit protection for commercial and industrial distribution systems.
  • Technical Specifications:
    • Brand: General Electric

GE TMQV32200

  • Product Name: TMQV Series 200 A 3-Pole Molded Case Circuit Breaker
  • Product Introduction: A 200 A, 3-pole, bolt-on molded case circuit breaker (MCCB) from GE's TMQV series, built for multi-family and commercial group metering applications. It serves as a tenant main breaker and as a drop-in replacement for the legacy TMQD32200, enabling seamless panel upgrades.