Shop

You are here:
  1. Home
  2. Shop
  3. Page 141

GE IS220PTCCH1B

Product Name:​ Mark VIe PTCC Thermocouple I/O Pack
Introduction:​ Distributed I/O processor that reads 12 TC channels, performs cold-junction compensation and pushes data to Mark VIe controller over IONet.
Technical Specifications:
  • Channels:​ 12 TC + 1 CJ reference

GE DS3800HMPK

Product Name:​ Mark IV Motor Drive Interface Module
Introduction:​ Auxiliary I/O board managing lube-oil pump, turning-gear and fan motors in Mark IV turbine sequencer.
Technical Specifications:
  • Digital Inputs:​ 8 (motor status, thermal switch)

GE 6KP1143060X9B1

Product Name:​ 6KP Series 1140 V Unidirectional TVS Diode
Introduction:​ Axial-lead silicon avalanche diode for clipping lightning/switching surges on DC buses.
Technical Specifications:
  • Peak Pulse Power:​ 6000 W (10/1000 µs)

GE IC756SDV001K-98 Industrial Automation Module

GE DS200DTBBG1ABB

Product Name:​ Mark V Discrete Input Termination Board
Introduction:​ Field wiring hub that conditions 24/48 V discrete signals and feeds them to Mark V DI processor boards.
Technical Specifications:
  • Terminals:​ 190 screw terminals

GE THKMA31000

Product Name:​ GE TKMA Series 3-Pole Thermal-Magnetic MCCB
Introduction:​ Bolt-on molded case breaker for industrial feeder and large-motor branch protection.
Technical Specifications:
  • Frame:​ TKM, 1000 A continuous

GE DS3800HAIC1B1A

Product Name:​ Mark II/III Host Communication Adapter Card
Introduction:​ Legacy serial gateway letting a GE Mark I/II/III turbine controller talk to plant DCS/SCADA via RS-232/485.
Technical Specifications:
  • Interfaces:​ 1 × RS-232 (config), 1 × RS-485 (Modbus RTU/ASCII)

GE DS200CDBAG1B

Product Name:​ Mark V Speedtronic Contactor Driver Board
Introduction:​ Interface board that receives 5 V logic from the Mark V DSP and drives high-speed DC contactor coils in turbine exciter, DC bus and trip circuits.

GE IS220PTCCH1B

  • Product Name:​ Thermocouple Input Package
  • Product Description:​ Part of the GE Mark VIe distributed control system. This package consists of a processor board and a terminal board, specifically designed for high-speed thermocouple signal acquisition.

GE IS200VRTDH1D

  • Product Name:​ Resistance Temperature Detector (RTD) Input Module
  • Product Description:​ A high-density input module designed for the GE Mark VI Speedtronic Turbine Control System. It converts analog resistance signals from field sensors into digital data for the main processor.

GE DS3800DCMB1D1C

Product Name:​ Mark IV DCMB Digital Communication Module
Product Introduction:​ Serial communication and control-logic board in Mark IV; exchanges data with external meters, recorders, or peer controllers.
Technical Specifications:
  • Ports: 2 independent serial (Port A / Port B)

GE DS200TCQAG1B

Product Name:​ Mark V TCQA Analog I/O and Q-Bus Expander Board
Product Introduction:​ Mark V Speedtronic board giving analog I/O termination and Q-Bus expansion to remote I/O racks.
Technical Specifications:
  • Connectors: 4 × 34-pin, 2 × 40-pin

GE 994D153G18

Product Name:​ Mark VIe VMEbus Backplane Assembly
Product Introduction:​ 19-inch VME64x backplane used in Mark VIe control chassis to carry processor, I/O packs, and power distribution.
Technical Specifications:
  • Bus: VME64/VME64x