Shop

You are here:
  1. Home
  2. Shop
  3. Page 41

Kollmorgen CB06261

Product Brief:​ Factory-molded shielded power cable with motor-side circular connector (Intercontec M23) and drive-side flying leads or terminal-block plug for Kollmorgen SERVOSTAR S300/S600/S700 or AKD drives. CB06261 typically denotes a motor power cable (with or without brake leads) for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class, 3 m length typical — "06261" encodes length and pinout). For AKM motors the equivalent modern part is CE-prefix (e.g., CE06261 = AKM power cable 3 m). CB06261 = legacy Goldline/early AKM power cable.

Kollmorgen B-404S-C-93-B3-072

Product Brief:​ B-404S indicates frame 40, S = special stack variant; "-C-" = C-winding (higher torque constant than B-winding, lower max speed — typical continuous stall torque for B-404C ~5.5–6.5 Nm). "93" = keyed shaft + standard seals; "B3" = circular connector + shaft seal; "-072" = special lamination stack length 72 mm​ (non-standard — standard stacks are typically ~50/65/80 mm for B-40x; 072 is a custom length altering inertia and torque proportionally). Factory-fitted with 2-pole resolver. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for C-winding).

Kollmorgen B-402-B-A1-B2

Product Series:​ Kollmorgen Goldline B Series​ (Low-Inertia, 230 VAC Line Voltage)
Product Brief:​ 3-phase interior permanent magnet (IPM/NdFeB) synchronous servo motor. Frame "40" = B-40x — flange 110 mm × 110 mm (NEMA 56 / IEC 110), pilot ≈ 80 mm, 4× M8 on 130 mm BCD. "B" winding = medium-low torque constant / higher speed capability. Factory-fitted with 2-pole resolver (standard on Goldline B). "A1" = keyed shaft + standard seals; "B2" = mating circular connector type + optional shaft seal. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for B-winding).

Kollmorgen CR06660

Product Brief:​ Factory-molded shielded cable with motor-side circular connector (Intercontec M23 or Hirschmann-style) and drive-side flying leads or mating connectors for Kollmorgen SERVOSTAR CD/S300/S600/S700 drives. CR06660 typically denotes a servo motor feedback cable (resolver or encoder) or combined power+feedback cable​ for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class). Exact function (POWER vs FEEDBACK) must be verified from the cable tag — CR-series cables are often feedback-only for Goldline; power cables of same era are CB-prefix.

Kollmorgen AKM41H-AN92GF0

Product Brief:​ High-torque-density 3-phase PMSM servo motor, frame 41 (100 × 100 mm IEC flange), H-winding = medium stack length for AKM41 (continuous stall torque ~4.8–5.5 Nm). Factory-fitted with EnDat 2.1/2.2 absolute multiturn encoder (option "92G"), keyed shaft ("N" = keyed in AKM code — confirmed by AN92GF0 where 'N' = keyed), 24 VDC spring-applied holding brake ("F" = brake present), and standard IP65 shaft seal + rotatable M23 feedback/power connectors. Auto-recognizable by AKD/S700 drives via motor ID resistor network.

Kollmorgen AKD-P00306-NBEC-0000

Product Brief:​ Compact single-axis Ethernet-based servo drive. "P00306" = P-version (120/240 VAC 1Φ/3Φ input), 3 Arms continuous / 9 A peak. "NBEC" = N(Standard I/O), B(EtherCAT fieldbus card fitted), E(No STO), C(Extended I/O). "0000" = No additional accessories. Supports high-speed real-time communication via EtherCAT (CoE CiA 402 profile) for multi-axis synchronization. Fully compatible with AKM and AKM2G motors via auto motor ID.

Kollmorgen AKD-P04807-NB

Product Brief:​ High-performance single-axis servo amplifier for PMSM, asynchronous AC, linear, and DC brush motors. "P04807" = P-version (187–528 VAC 3Φ input), 48 Arms continuous / 96 A peak. "N" = no extra option card fitted (fieldbus slot empty). "B" = No built-in fieldbus interface card — analog ±10 V, Step/Dir, Encoder Follower, and Modbus TCP via Ethernet port are standard. Final "—" (no trailing letters) = Standard I/O, no STO. Delivers up to 32 kW​ continuous output power @ 480 VAC. Fully auto-recognizes AKM/AKM2G motors via M23 connector ID resistors.

Kollmorgen MCSS08-3224-00

Product Brief:​ The part number MCSS08-3224-00 denotes a custom-engineered motion control sub-assembly, cable harness, or sensor array originally designed for a specific OEM machine builder or specialized industrial application. These components are tailored to meet unique mechanical and electrical requirements of a particular machine platform. As a legacy custom part, detailed public specifications are not available, and it typically requires direct OEM consultation for replacement or cross-referencing to a standard product.

Kollmorgen SE30200-000000

Product Brief:​ Fail-safe (spring-applied, electrically released) friction disk brake designed to mount integrally on the non-drive end of a Kollmorgen Goldline B/M/H or AKM series servo motor. Engages automatically when 24 VDC brake supply is removed (power-off = brake ON). Holds load during dwell, emergency stop, or power loss. "SE30200" is an internal part number for a specific frame-size brake assembly.

Kollmorgen AKM63G-ANCNR-0

Product Series:​ Kollmorgen AKM®​ Series — AC Permanent Magnet Synchronous Servo Motors
Product Brief:​ High-torque-density 3-phase PMSM servo motor in size 63 (132 mm square flange), long stack length (code G = stack 4 of 4 for AKM6), optimized for continuous-duty industrial motion axes requiring high torque. Factory-fitted with resolver feedback, smooth (no keyway) shaft, no holding brake, standard IP65 seals, and rotatable circular connector. Directly auto-recognizable by AKD-family drives via motor ID resistor network in connector.

Kollmorgen S61400-550O

Product Series:​ Kollmorgen SERVOSTAR S600​ Family (Predecessor to AKD)
Product Brief:​ Digitally controlled 3-phase PWM servo amplifier for brushless PMSM, asynchronous AC, DC brush motors. S61400 = 14 Arms continuous / 28 A peak, 240–480 VAC 3Φ input. "-550O" is a custom factory-suffix denoting a specific OEM configuration, which may include non-standard I/O mapping, custom firmware, or a special connector arrangement. The base S614 unit supports resolver, incremental encoder, SinCos, EnDat, and BiSS feedback. Compatible with AKM series motors — auto motor ID from AKM connector.

Kollmorgen S403BA-PB

Product Series:​ Kollmorgen SERVOSTAR S400​ Family (Compact, Cost-Effective Digital Servo Amplifiers)
Product Brief:​ Single-axis digitally controlled 3-phase PWM servo amplifier for brushless PMSM and DC brush motors. S403 = 3 Arms continuous / 6 A peak, 200–230 VAC 3Φ input. "BA" = multi-feedback interface + built-in brake control output; "PB" = Premium feedback card fitted (resolver, incremental encoder, SinCos 1 Vpp, EnDat 2.1/2.2, Hiperface/Hiperface DSL). Standard I/O includes ±10 V analog command and Step/Dir inputs. Compatible with AKM2x–AKM5x motors.