Shop

You are here:
  1. Home
  2. Shop
  3. Page 701

Bently Nevada 130539-25 Power Supply Module

Technical Specifications:
  • Part Number: 130539-25
  • Input Voltage: 85–264 VAC, 47–63 Hz
  • Output Voltage: 24 VDC regulated
  • Power Rating: 25 watts
  • Redundancy: Optional dual supply
  • Protection: Overvoltage, overcurrent, thermal

Bently Nevada 128229-01 Accelerometer Sensor

Technical Specifications:
  • Part Number: 128229-01
  • Sensor Type: Piezoelectric accelerometer
  • Frequency Range: 0.5 Hz to 10 kHz
  • Sensitivity: 100 mV/g
  • Mounting: Stud or adhesive
  • Environmental Rating: IP67

Bently Nevada 125840-01 Relay Module

Technical Specifications:
  • Part Number: 125840-01
  • Module Type: Relay Output
  • Contact Type: Form C (SPDT)
  • System Integration: 3500 series
  • Isolation: Channel-to-channel and system isolation

Moog D072M037 Flow Control Servovalve

  • Technical Specifications:
    • Control Function: Flow control.
    • Size (Mounting Pattern): Size 6 (ISO 10372 - 06 - 05 - 0 - 92).
    • Hydraulic Data: The rated flow per spool land at a valve pressure drop of 35 bar (500 psi) ranges from 95 to 225 l/min (25 to 60 gpm), with standard configurations of 95, 150, and 225 l/min (25, 40, and 60 gpm). The maximum operating pressure is 210, 350, or 490 bar (3,000, 5,000, or 7,000 psi).
    • Performance Data: The 100% step response time is 11 to 33 ms (response at 3,000 psi system pressure), and the frequency response is 80 to 85 Hz (at 90° phase lag).
    • Electrical Data: The rated signal is 8 to 200 mA, with standard configurations of 8, 15, and 40 mA.
    • Physical Data: The weight of the steel body is 7.26 kg (16 lbs), and the weight of the aluminum body is 3.52 kg (7.8 lbs).

Moog D662Z4378K

  • Technical Specifications:
    • Weight: 1.5 KG.
    • Nominal Diameter: DN65.
    • Pressure Rating: 40 MPa.
    • Material: Cast iron.
    • Connection Method: External thread connection.

Moog D633-536B Direct Driven Valve (DDV)

  • Product Introduction: It belongs to the Moog D633 series, a direct-driven servo valve with integrated electronics and an analog interface. The valve uses a permanent magnet linear motor to directly drive the valve spool, eliminating the need for pilot oil, and has the characteristics of high functional flexibility and pressure-independent dynamics.