Shop

You are here:
  1. Home
  2. Shop
  3. Page 668

AEG PC-A984

  • Product Introduction: AEG PC-A984 is a high-performance central processing unit (CPU) module designed as the core of the Modicon 984 series PLC systems, engineered for medium to large-scale industrial automation and process control applications. The CPU features a 32-bit RISC processor, high-capacity on-board memory, multi-protocol communication support and a high-speed backplane bus interface, delivering fast program execution and real-time I/O data processing. It supports IEC 61131-3 programming standards, built-in diagnostic functions and redundant power supply input, with a rugged industrial design optimized for 24/7 continuous operation in harsh environments. The PC-A984 is the primary control component for Modicon 984 series PLC systems, enabling complex control logic, sequential process control and integration with industrial networks in factory automation, process control and building automation applications.
  • Technical Specifications:
    • Processor: 32-bit industrial RISC processor, 80 MHz clock speed
    • Program Execution Speed: 0.1 μs per boolean instruction, 0.5 μs per floating-point instruction
    • On-Board Memory: 2 MB Flash program memory (non-volatile), 1 MB RAM data memory, expandable via AS-M996-000 memory module
    • Supported Programming Standards: IEC 61131-3 (Ladder Logic, Function Block Diagram, Structured Text, Sequential Function Chart, Instruction List)

AEG AS-J890-001

  • Product Introduction: AEG AS-J890-001 is a multi-protocol industrial communication gateway module designed for the Modicon 800 and 900 series PLC systems, engineered to enable seamless data exchange between Modicon PLCs and third-party industrial control devices, HMIs, SCADA systems and industrial networks. The module features dual independent communication ports, support for all mainstream industrial communication protocols, and a high-speed backplane interface, providing bi-directional real-time data transfer and protocol conversion with ultra-low latency. It supports configuration via PLC programming software, has built-in fault detection and redundant communication options, and is an ideal solution for integrating Modicon PLC systems into multi-vendor industrial automation networks in factory automation, process control and building automation applications.
  • Technical Specifications:
    • Communication Ports: 2 independent configurable communication ports (Port 1: RS-485/RS-232; Port 2: Ethernet RJ45 + RS-485)
    • Supported Protocols: Modbus RTU/ASCII/TCP, Profibus-DP, Ethernet/IP, DeviceNet, CANopen, Siemens S7 PPI/MPI, Mitsubishi MC Protocol
    • Backplane Interface: Modicon 800/900 series proprietary high-speed bus, 20 Mbps data transfer rate, <0.5 ms latency
    • Data Transfer Capacity: Up to 1024 input and 1024 output data words (bi-directional), configurable data mapping

AEG AS-B875-002

  • Product Introduction: AEG AS-B875-002 is a high-precision 4-channel thermocouple input module designed for the Modicon 800 series PLC systems, optimized for critical temperature measurement and control applications in industrial process control, manufacturing and instrumentation. The module features built-in high-accuracy cold junction compensation (CJC), advanced signal conditioning, wide thermocouple type support and full channel-to-channel isolation, delivering ultra-precise and stable temperature data even in high-noise industrial environments. It supports high-speed sampling and configurable digital filtering, and integrates seamlessly with the Modicon 800 series backplane bus, making it an ideal solution for critical temperature monitoring in pharmaceutical, semiconductor, chemical and food manufacturing applications requiring GMP/ISO-compliant precision measurements.
  • Technical Specifications:
    • Number of Input Channels: 4 fully isolated thermocouple input channels (channel-to-channel and channel-to-backplane)
    • Supported Thermocouple Types: Software-configurable per channel – J, K, T, E, R, S, B, N (8 industrial standard types)
    • Measurement Range: Dependent on thermocouple type – J (-210°C to +1250°C), K (-270°C to +1372°C), T (-270°C to +400°C), E (-270°C to +900°C), R (0°C to +1768°C), S (0°C to +1768°C), B (400°C to +1820°C), N (-200°C to +1300°C)

AEG AS-M996-000

  • Product Introduction: AEG AS-M996-000 is a high-capacity non-volatile memory module designed for the Modicon 984 and 900 series PLC systems, engineered to provide expanded storage for large control programs, process data logs, recipe parameters and alarm event records. The module features industrial-grade SLC NAND Flash memory, a high-speed backplane interface, and no-battery data retention, eliminating the risk of data loss from battery failure and reducing maintenance requirements. It supports seamless integration with Modicon 984/900 series CPU modules, with automatic memory detection and allocation, and is ideal for complex industrial automation applications requiring large program storage, long-term data logging and high-reliability non-volatile memory.
  • Technical Specifications:
    • Memory Type: Industrial-grade SLC NAND Flash (non-volatile), no battery required for data retention
    • Total Memory Capacity: 4 MB (2 MB program memory + 2 MB data memory), dual partitioned storage
    • Data Retention: >15 years at 25°C, >7 years at 70°C (no power applied)
    • Access Speed: <40 ns read speed, <80 μs write speed (high-speed for real-time PLC operation)
    • Backplane Interface: Modicon 984/900 series proprietary high-speed bus, 10 Mbps data transfer rate

AEG 15A0251-000

  • Product Introduction: AEG 15A0251-000 is a high-reliability backplane module engineered as the core interconnect component for Modicon 800 series PLC chassis, providing a dedicated communication and power distribution bus for all installed I/O, communication and power modules. The backplane features a rugged PCB construction, gold-plated contact pins, isolated power/communication channels and built-in fault detection, ensuring fast, reliable data transfer and stable power distribution between the PLC CPU and all peripheral modules. It is designed for 24/7 continuous operation in harsh industrial environments, with high vibration/shock resistance and wide temperature tolerance, and is a critical replacement and upgrade component for Modicon 800 series PLC systems in factory automation, process control and building automation applications.
  • Technical Specifications:
    • Chassis Compatibility: Modicon 800 series 8-slot PLC chassis (primary and expansion chassis)
    • Number of Module Slots: 8 standard Modicon 800 series module slots, 1 dedicated CPU slot + 7 universal I/O/communication slots
    • Backplane Bus Protocol: Modicon 800 series proprietary high-speed bus, 20 Mbps data transfer rate
    • Data Transfer Latency: <0.5 ms between CPU and any I/O slot, synchronous data transfer for all slots
    • Power Distribution: Isolated +5 V DC (logic power) and +24 V DC (I/O power) to each slot; 5 A +5 V DC / 10 A +24 V DC per chassis total

AEG AS-BDEP-218

  • Product Introduction: AEG AS-BDEP-218 is a high-density 16-channel digital output module with electromechanical relay outputs, designed for the Modicon 800 series PLC systems. Engineered for general-purpose industrial control applications, the module provides isolated dry contact outputs for controlling AC/DC field devices, eliminating the need for additional signal conversion components and enabling seamless integration with both low-voltage DC and line-voltage AC equipment. It features channel-to-group isolation, comprehensive fault protection, and a compact modular design, with individual LED status indicators for each channel. The module is ideal for high-density output control in factory automation, building automation and process control applications where reliable switching of mixed AC/DC loads is required.
  • Technical Specifications:
    • Number of Output Channels: 16 independent relay output channels, 8-channel isolation groups (2 isolation groups total)
    • Output Type: Electromechanical dry contact relays, SPST (Single Pole Single Throw), normally open (NO) contacts
    • Rated Switching Voltage: 24 V DC, 115 V AC, 230 V AC (mixed AC/DC load support)
    • Rated Switching Current: 2 A per channel (resistive load), 1 A per channel (inductive load), 8 A per isolation group

AEG A1482AES Industrial Grade AC Drive/VFD for 3-Phase Motors

  • Product Introduction: AEG A1482AES is a high-performance variable frequency drive (VFD) designed for precise speed and torque control of 3-phase AC induction motors in industrial automation, process control and material handling applications. The drive features advanced vector control algorithms, a wide power range, comprehensive motor protection and multi-protocol communication support, with a rugged industrial design optimized for reliable operation in harsh environments. It supports both constant torque and variable torque applications, enables energy savings for fan, pump and blower applications, and integrates seamlessly with PLC and HMI systems, making it a versatile motor control solution for industrial, commercial and municipal applications requiring efficient, precise motor control.
  • Technical Specifications:
    • Motor Type: 3-phase squirrel cage AC induction motors (IE1/IE2/IE3/IE4 high-efficiency motors)
    • Rated Voltage: 380-480 V AC 3-phase (50/60 Hz), wide input range 320-528 V AC
    • Power Range: 7.5 kW (10 HP) at 400 V AC, 9.2 kW (12.5 HP) at 460 V AC (continuous duty)
    • Control Modes: V/f scalar control, sensorless vector control (SLVC), torque control, speed control
    • Speed Regulation Accuracy: ±0.5% of rated speed (SLVC mode), ±3% of rated speed (V/f mode)
    • Starting Torque: 150% of rated torque at 0.5 Hz (SLVC mode), 100% of rated torque at 0 Hz (torque control mode)

AEG AS-P930-104

  • Product Introduction: AEG AS-P930-104 is a compact, rugged remote I/O chassis designed for the Modicon 900 series PLC systems, engineered to extend modular I/O capabilities to field locations in industrial automation and process control applications. The chassis features an integrated communication module, 4 standard Modicon I/O slots, and a robust industrial design, enabling distributed I/O control with seamless data transmission to the central PLC main chassis. It supports hot-swappable I/O module installation, comprehensive power and communication fault detection, and wide environmental adaptability, making it an ideal solution for decentralized control systems in large-scale factories, remote processing plants and harsh industrial environments where long cable runs to a central chassis are impractical.
  • Technical Specifications:
    • Number of I/O Slots: 4 standard Modicon 900 series I/O slots, compatible with digital/analog/temperature I/O modules
    • Integrated Communication: Modbus RTU/RS-485, baud rate configurable (9600/19200/38400/57600/115200 bps)
    • Communication Distance: Up to 1200 meters (RS-485) with proper shielding, extendable via repeaters
    • Power Supply Input: 24 V DC (18-30 V DC), redundant power input support (dual 24 V DC terminals)
    • Power Distribution: Independent 24 V DC power to each I/O slot, 2 A per slot overcurrent protection

AEG MMPMC1200 Series 12-inch Advanced Industrial HMI Panel

  • Product Introduction: AEG MMPMC1200 is a high-performance 12-inch human-machine interface (HMI) panel designed for advanced industrial automation, process control and machine control applications. The panel features a high-resolution touchscreen, powerful embedded processor, multi-protocol communication support and a rugged industrial design, enabling intuitive real-time monitoring and control of complex industrial systems. It supports advanced functionality including data logging, recipe management, remote access and machine vision integration, with a user-friendly development environment for custom HMI project creation. It is an ideal operator interface for medium to large-scale industrial machines and process control systems requiring a balance of screen size, performance and functionality.
  • Technical Specifications:
    • Display: 12.1-inch color TFT LCD, 1024×768 XGA resolution, 500 cd/m² high brightness, 1000:1 contrast ratio, LED backlight (50,000 hour lifespan)
    • Touch Input: Resistive touchscreen (4-wire), scratch-resistant tempered glass surface, single-touch operation (gesture support: zoom, pan)

AEG 3185996 Series Industrial PLC Cable Assembly

  • Product Introduction: AEG 3185996 is a high-quality industrial shielded cable assembly exclusively designed for connecting Modicon PLC main chassis to remote I/O racks in industrial automation systems. The cable features heavy-duty shielded construction, industrial-grade connectors and a rugged outer jacket, engineered to deliver reliable high-speed data transmission while resisting electrical interference, mechanical damage, oil and moisture in harsh industrial environments. It is pre-terminated with factory-installed connectors for plug-and-play installation, eliminating on-site wiring errors and ensuring consistent performance across Modicon automation systems. It is a critical interconnect component for distributed I/O systems, enabling reliable communication between the central PLC and remote field I/O in large-scale industrial applications.
  • Technical Specifications:
    • Cable Type: Multi-core shielded twisted pair cable (for data) + power conductors (for remote I/O power)
    • Number of Conductors: 8 twisted pairs (data) + 4 power conductors (24 V DC + GND), 12 total conductors
    • Conductor Gauge: 22 AWG (data conductors, tinned copper); 18 AWG (power conductors, tinned copper) – high conductivity and corrosion resistance
    • Shielding: Double shielding – foil shield (individual twisted pairs) + braided copper shield (overall cable) – 100% coverage for maximum EMC protection

AEG AS-BDEP-216 Modicon AS-BDEP-216 16-Channel Digital Output Module

  • Product Introduction: AEG AS-BDEP-216 is a high-density 16-channel digital output module for the Modicon 800 series PLC systems, designed for general-purpose digital output control in industrial automation, process control and building automation applications. The module features NPN transistor outputs with high current capacity, channel-to-group isolation and a compact modular design, enabling cost-effective control of a large number of field actuators, solenoids, relays and indicator lights in a single module. It integrates seamlessly with Modicon 800 series PLC chassis via the proprietary backplane bus, with simple configuration and reliable operation, making it an ideal solution for high-density digital output applications requiring a balance of performance, density and cost.
  • Technical Specifications:
    • Number of Channels: 16 digital output channels (4-channel groups isolated, channel-to-backplane isolated)
    • Output Type: NPN transistor (sink output), open collector
    • Output Voltage: 24 V DC (18-30 V DC operating range)
    • Output Current: 1.5 A per channel, 8 A per 4-channel group, 16 A total per module
    • Output Response Time: <1 ms (on/off)

AEG 7428-042-24809 Series Industrial Power Supply Module

  • Product Introduction: AEG 7428-042-24809 is a rugged industrial DIN-rail mount power supply module designed for providing stable and reliable DC power to PLCs, I/O modules, HMIs and other industrial automation equipment in harsh industrial environments. The module features a wide AC input voltage range, high efficiency, comprehensive electrical protection and a compact design, with a metal housing for enhanced heat dissipation and mechanical protection. It is engineered for continuous 24/7 operation, with low ripple and noise to ensure the safe and reliable operation of sensitive electronic equipment, and is a universal power supply solution for industrial control cabinets, automation systems and remote monitoring stations.
  • Technical Specifications:
    • Topology: Switch mode power supply (SMPS), single output
    • Input Voltage: 85-265 V AC (single-phase, 50/60 Hz) / 120-370 V DC (universal input, no voltage selection required)
    • Output Voltage: 24 V DC (fixed, adjustable ±10% via trim potentiometer for fine tuning)
    • Output Current: 10 A (continuous at 40°C); 8 A (continuous at 50°C); 5 A (continuous at 60°C)
    • Output Power: 240 W (nominal at 40°C)