Shop

You are here:
  1. Home
  2. Shop
  3. Page 71

GE DS3820HI0B

Product Name:​ GE Fanuc DS3820HI0B High-Density Analog Input I/O Module
Product Introduction:​ A high-density analog input module for GE Fanuc Mark V / Mark VI turbine control systems, used for monitoring temperature, pressure, flow, and level signals in power generation and process control applications.

GE SR750-P5-G5-S5-LO-A1-R

Product Name:​ GE Multilin SR750 Feeder Management & Protection Relay
Product Introduction:​ The SR750 is a microprocessor-based feeder protection and management relay fromGE Grid Solutions (Multilin series). The order code decodes as: P5​ = 5 A nominal CT secondary current inputs; G5​ = 5 A zero-sequence (ground) current input; S5​ = 5 A sensitive ground current input; LO​ = Low control power range (20–60 VDC or 20–48 VAC); A1​ = standard configuration; R​ = revision.

GE TJK-636400

Product Name:​ GE TJK-636400 3-Pole Molded Case Circuit Breaker
Product Introduction:​ A heavy-duty thermal-magnetic molded case circuit breaker from the GE J600/TJK line, designed for reliable branch circuit and feeder overcurrent protection in industrial and commercial power distribution.

GE DS3820PSLA1A1A

Product Name:​ GE DS3820PSLA1A1A AC/DC Power Supply Module
Product Introduction:​ This is a power supply module developed by General Electric under the Speedtronic series of components. It converts alternating (AC) power into usable direct current (DC) power for industrial automation and turbine control systems, conditioning outputs to eliminate noise and spikes while protecting downstream components via integrated fuses.

GE 0621L0462-G001

Product Name:​ GE 0621L0462-G001 Mark V/VI Speedtronic I/O Board (Analog/Digital Interface)
Product Introduction:​ The 0621L0462-G001 (Revision G001) is a core analog/digital I/O interface board for GE's Speedtronic Mark V/VI gas turbine control system. It collects field sensor signals, performs signal conditioning and conversion, and outputs control commands — acting as the critical signal conversion and transmission module between field devices and the Mark V/VI controller.

GE TKMA836700

Product Name:​ GE TKMA836700 700A 600V 3-Pole Thermal-Magnetic Molded Case Circuit Breaker (TKM8 Frame)
Product Introduction:​ The TKMA836700 is a high-capacity molded case circuit breaker from GE's Spectra / TKMA series, utilizing an 800 A (TKM8) frame with a 700 A continuous current rating. It features an interchangeable thermal-magnetic trip unit and is designed for large industrial and commercial distribution feeders, large motor mains, and transformer secondary protection.

GE 0215B8070G5-3

Product Name:​ GE 0215B8070G5-3 Industrial Control / Power Module
Product Introduction:​ The GE 0215B8070G5-3 is a control module designed for GE industrial automation systems, playing a critical role in signal processing and control within turbine control and industrial automation architectures. It is commonly deployed as a controller card or power module in power plants, petrochemical facilities, and steel mills.

GE DS3800HRMD

Product Name:​ GE DS3800HRMD Mark IV 8 kB Dual-Ported RAM Board
Product Introduction:​ The DS3800HRMD is a specialized 8 kB RAM memory board designed for GE's Mark IV Speedtronic turbine control system. It provides essential dual-ported memory storage that enables simultaneous data access by multiple devices or processes, thereby improving the efficiency of data exchange and control logic execution in demanding industrial turbine control applications.

GE DS3800HMPJ

Product Introduction:​ The DS3800HMPJ is a fully populated I/O link card from GE's Mark VI Speedtronic series, engineered for high-performance analog input applications in extreme environmental conditions. The "J" suffix indicates a ruggedized configuration with components qualified for extended temperature operation and a factory-enabled internal IONet termination resistor. It provides factory-configured analog input scaling, precision signal conditioning, comprehensive diagnostics, and advanced filtering.

GE DS3800HIOD1G1G

Product Name:​ GE DS3800HIOD1G1G Mark IV Digital Input/Output (I/O) Board
Product Introduction:​ The DS3800HIOD1G1G is a digital I/O board designed for GE's Mark IV Speedtronic turbine control system. It serves as a critical interface for binary signal communication between the Mark IV controller and field devices (sensors, actuators, HMIs, and network equipment) in gas and steam turbine applications. The "1G1G" suffix denotes a ruggedized configuration with conformal coating, 2.5 A fusing, and extended temperature range.

GE 531X301DCCAHM1

Product Name:​ GE 531X301DCCAHM1 AC/DC2000 Drive Control Card (Main Control Card)
Product Introduction:​ The 531X301DCCAHM1 is a main drive control card from GE's 531X family, designed as a critical control component for AC/DC2000 adjustable speed drive systems. It consolidates all essential control features required for an AC/DC2000 type drive to operate efficiently within a compact, easy-to-handle printed circuit board. The AC/DC2000 drive requires this board to be operational for the system to function.

GE IS215ISBBH2A

Product Name:​ GE IS215ISBBH2A Mark V Speedtronic Analog I/O Board (TCQA) / Current Source Input Block
Product Introduction:​ The IS215ISBBH2A is a specialized analog input/output board belonging to GE's Speedtronic Mark V gas turbine control system. It serves as the TCQA (Terminal Board for Current source, Quadrature, and Analog) interface, responsible for scaling, conditioning, and processing a wide range of analog signals collected from the I/O cores R1, R2, and R3 in a Mark V turbine control cabinet. The board functions as a "signal translator," converting raw field signals into digital values usable by the controller.