Shop

You are here:
  1. Home
  2. Shop
  3. Page 250

Kollmorgen S70301-NANA-024

Product Introduction

Compact single-axis high dynamic servo amplifier under Kollmorgen S700 platform, designed for mid-power high-speed precision motion control. Full digital hardware architecture with dual-core real-time processor, integrated EMC filter and brake circuit. Model suffix NANA defines standard feedback interface, universal I/O, standard safety function without extended safety card; suffix -024 indicates 24 VDC auxiliary I/O standard configuration.

Kollmorgen MMC-SD-1.0-230-D

Product Introduction

Standalone single-axis intelligent servo drive integrated with motion control CPU, independent closed-loop operation without external PLC controller. Native support sinusoidal three-phase PMSM driving, embedded full digital triple-loop regulator for position, speed and current control. Manufactured in USA for low-to-medium power precision automation equipment.

Kollmorgen S72402-NANANA

Product Overview

S72402-NANANA is medium-current digital servo drive under Kollmorgen DIGIFAS S7200 platform. Model decoding: S72 = S7200 generation wide-input drive series identifier; 4 = 4 Arms continuous three-phase output current grade; 02 = 80–480V ultra-wide single/three-phase mains input hardware base variant; suffix NANANA = full base factory standard configuration without optional STO safety modules, external braking chopper daughter boards or proprietary fieldbus expansion cards, equipped with native CANopen, RS232 and analog ±10V command input interfaces only.

Kollmorgen AKD-P01206-NCA

Product Overview

AKD-P01206-NCA is performance-grade single-axis servo drive from Kollmorgen AKD-P platform. Model breakdown: AKD-P = high-performance mains-powered variant; 012 = 12 Arms continuous three-phase output current rating; 06 = 115V single/230V single/three-phase universal mains input hardware base; suffix NCA = native EtherCAT CoE real-time Ethernet bus, SFD single-cable servo feedback interface, standard analog/digital I/O configuration without STO safety function.

Kollmorgen AKD-P01207-NBC

Product Overview

AKD-P01207-NBC is high-performance mains-powered digital servo drive from Kollmorgen AKD performance platform. Model breakdown: AKD-P = Performance high-bandwidth AC mains variant; 012 = 12 Arms continuous three-phase output current grade; 07 = 115/230V single/three-phase universal mains input hardware base; suffix NBC = native EtherCAT CoE real-time Ethernet bus, BiSS absolute serial encoder feedback interface, standard analog/digital I/O configuration without STO safety module.

Kollmorgen AKD-B01206-NCS

Product Overview

AKD-B01206-NCS is baseline low-voltage DC digital servo drive under Kollmorgen AKD series. Model decoding: AKD-B = Baseline cost-effective low-voltage variant; 012 = 12A continuous DC output current rating; 06 = 48VDC low voltage hardware base; suffix NCS = native CANopen bus, SFD single-cable feedback interface, standard digital I/O configuration without STO safety module or Ethernet expansion card.

Kollmorgen TTR-5302-107-A-18-T

Product Overview

TTR-5302-107-A-18-T is two-stage telescopic high-load linear actuator under Kollmorgen TTR product line. Model breakdown: TTR = telescopic double-stage linear actuator series; 5302 = 53mm cross-section frame size medium-load mechanical core; 107 = fixed effective total travel stroke of 107 mm; A = AKM series inline servo motor mounting flange; 18 = 18mm single-start precision ball screw lead; T = full heavy-duty reinforced IP65 sealing package with external pre-wired limit switch harness, extended high-temperature lubrication specification.

Kollmorgen TT5302-176-A

Product Overview

TT5302-176-A is a medium-load sealed ball screw linear servo actuator manufactured under Kollmorgen TT series linear positioning product line. Model code definition: TT = sealed ball screw linear actuator base series; 5302 = frame size 53 standard body cross-section, medium lead ball screw mechanical core specification; 176 = factory fixed total effective linear travel stroke length of 176 mm; suffix A = standard AKM servo motor direct inline mounting flange configuration, single carriage slide block, standard IP54 environmental sealing package without custom extended lubrication ports or external limit switch pre-wiring harnesses.

Kollmorgen S70302-NANANA

Product Overview

S70302-NANANA is a 3Arms medium-power digital servo amplifier belonging to Kollmorgen DIGIFAS S700 series platform. Model decoding: S700 = DIGIFAS S700 generation drive series identifier; 3 = 3 Arms continuous three-phase output current grade; 02 = 110–480V wide-range single/three-phase mains input hardware base variant; suffix NANANA = full base factory standard configuration without optional STO safety modules, external braking chopper daughter boards or proprietary fieldbus expansion cards, equipped with native CANopen, RS232 and analog ±10V command input interfaces only.

Kollmorgen B-204-C-31

Product Overview

B-204-C-31 is NEMA 20 frame low-inertia brushless servo motor from Kollmorgen Goldline B platform. Model code full breakdown: B = low rotor inertia Goldline B series classification; 20 = NEMA 20 standard mounting frame size; 4 = medium stator stack length specification; C = 230VAC single/three-phase winding voltage grade; suffix 31 = analog multi-pole resolver feedback hardware configuration, standard smooth unkeyed output shaft without integrated electromagnetic holding brake.

Kollmorgen S61401-PB

Product Overview

S61401-PB is a 14Arms high-performance digital servo drive under Kollmorgen S600 series. Model breakdown: S6 = S600 platform identifier; 14 = 14 Arms continuous three-phase output current rating; 01 = base 208–480V three-phase mains input hardware variant; suffix PB = factory integrated PROFIBUS-DP fieldbus expansion card + sine/cosine incremental encoder dedicated feedback interface configuration.

Kollmorgen CR06250-2D062A

Product Overview

CR06250-2D062A is a 6A compact digital servo amplifier from Kollmorgen SERVOSTAR CD series. Model decoding: CR = cabinet-mounted CD standard variant; 06 = 6 Arms continuous output current grade; 250 = 115/230V single/three-phase universal input hardware base; suffix 2D062A = factory custom configuration with integrated EtherCAT bus interface, STO safety torque off circuit and extended analog/digital I/O expansion module.