Shop

You are here:
  1. Home
  2. Shop
  3. Page 93

GE SR737-5-5-HI-485

Product Name:​ GE Multilin SR737 Digital Feeder/Overcurrent Protection Relay
Product Introduction:​ The SR737 is a digital feeder protection relay developed by GE Grid Solutions for primary circuit protection on distribution networks at any voltage level, and can also serve as backup protection for transformers and transmission lines. In the specific model "SR737-5-5-HI-485", "5-5" denotes 5 A CT input / 5 A CT secondary rated current, "HI" indicates a high-impedance type suitable for long-cable CT circuits, and "485" denotes an RS-485 communication interface.

GE 133D6343G1

The GE 133D6343G1 is a 133D series molded case circuit breaker (MCCB) with a 63 A rated current, 4-pole (4P) configuration, and a G-type electronic trip unit (LSIG protection). It is used for branch circuit protection in low-voltage power distribution systems.
  • Product Type: Molded Case Circuit Breaker (MCCB)
  • Series: GE 133D series modular MCCB

GE DS200SSRAG1A

The GE DS200SSRAG1A is a solid-state relay board serving the GE Mark V Turbine Control System. It switches high-power AC loads without moving mechanical contacts, providing silent, fast switching with no contact wear.
  • Product Type: Solid State Relay Board (Mark V Switching Control)
  • Brand: General Electric

GE DS200SDCIG1AFB

The GE DS200SDCIG1AFB is a DC Power Supply and Instrumentation Board (SDCI) designed for GE Mark V turbine control systems and DC2000 drive platforms. It provides regulated DC power and precise signal conditioning for control electronics, motor field circuits, and instrumentation.
  • Product Type: DC Power Supply & Instrumentation Board (SDCI)
  • System Compatibility: GE Mark V / DC2000 Drives

GE IS200TRPGH1BDD

The GE IS200TRPGH1BDD is a primary trip and flame detector terminal board within the Mark VI Speedtronic Turbine Control System. It executes critical emergency shutdown commands by driving trip solenoids and continuously monitoring flame detector circuits.
  • Product Type: Primary Trip / Flame Detector Terminal Board (TRPG)
  • Manufacturer: GE Fanuc / GE Vernova

GE 44B373188G02NSNB

The GE 44B373188G02NSNB is a 44B series high-power control relay commonly used in GE Mark V/VI gas turbine control systems and large-scale industrial DCS. It provides multiple groups of conversion contacts for signal isolation and logic conversion in critical control loops.
  • Product Type: High-Power Control / Auxiliary Relay (44B series)
  • Coil Voltage: Typically 110 VDC (denoted by "N" suffix — verify against nameplate)

GE DS3828CSN1A

The GE DS3828CSN1A is a motor protection and monitoring relay used for medium and low-voltage induction motors. It integrates motor protection, measurement, and monitoring functions.
  • Product Type: Motor Protection & Monitoring Relay
  • Rated Voltage: 110 VAC / 220 VAC / 24 VAC-DC (optional)

GE DS200IMCPG1C

The GE DS200IMCPG1C is an IAC2000I power-supply interface board for Mark V turbine control drives. It serves as the electrical junction between the SDCC control card and the IGBT power stack, routing 24 V logic power, gate-drive voltages, and status signals.
  • Product Type: Power-Supply Interface Board (IAC2000I)
  • Series: GE Mark V DS200

GE CR307BT94TC1RASAA

The GE CR307BT94TC1RASAA is a CR300/CR307 series industrial control relay with plug-in base mounting, belonging to GE's 300/400-line combination motor control family. The CR307 series is classified as NEMA Size 2 equipment with a maximum continuous rating of 45 A and a maximum voltage of 600 V.
  • Product Type: Plug-in Control Relay / CR307 Series Combination Starter Component

GE DS3800HPID

The GE DS3800HPID is a Mark VI / Speedtronic high-performance I/O link and analog interface board used in GE turbine control systems. It is built for high-density signal conditioning and end-of-chain IONet communication in critical turbine monitoring applications.
  • Product Type: I/O Link Card / High-Performance Analog Interface Module (Mark VI Speedtronic)

GE SKHB36BC1200

Product Name:​ GE Spectra RMS™ SK1200 Frame Molded-Case Circuit Breaker with MicroVersaTrip® Plus Trip Unit
Introduction:​ A high-capacity molded-case circuit breaker from GE's Spectra RMS SK series. The SKHB36BC1200 features a 1200 A frame, 3 poles, 600 V AC maximum, a MicroVersaTrip® Plus electronic trip unit, and provides adjustable overload and short-circuit protection for large electrical distribution systems.

GE 55A213937P550B

Product Name:​ GE 55A213937P550B – Multi-function I/O Module for Speedtronic Mark V/VI Gas Turbine Control System
Introduction:​ A versatile analog/digital I/O processing module used in GE's Speedtronic Mark V and Mark VI gas turbine control systems to acquire field process variables and output control signals to actuators. (Note: some public catalogs also list "55A213937P550B" as a medium-voltage fuse; the I/O module identification is consistent with the 55A-series part numbering for Mark V/VI modules. Verify the physical part and nameplate marking at delivery.)