Product Brief: The CE10560-S12 is an add-on plug-in communication board that fits into the expansion slot of Kollmorgen ServoStar 200/300/400 series drives, adding a CANopen (CiA DS301 v4.x / DSP-402 v2.x) interface for networked motion control. The "S12" denotes the CANopen version with specific firmware/connector configuration. CE1056012 is the same item sometimes written without hyphen.
Product Brief: The AKM65N is a medium-to-large frame (65 mm flange family, actual AKM6 = ~100–130 mm flange depending on region; N = specific stack/voltage winding) brushless servo motor with neodymium-iron-boron magnets delivering high continuous torque and peak overload capability. Designed for direct coupling with Kollmorgen S300/S400/AKD drives. The -ANC2R-00 option typically indicates: Standard winding, No brake, SFD Smart Feedback Device, Metric shaft with keyway, Standard seals, Straight connector (or flying leads), IP40 base rating.
Product Brief: The S400 series is Kollmorgen's mid-range digital servo drive offering compact design, multi-axis internal bus communication, and full digital control. The S406BA typically denotes a 400 V-class, 6 A continuous, analog ±10 V / CANopen-capable unit; CA406AC refers to the matching accessory/option or cable kit in legacy ordering systems. Compatible with AKM and legacy Goldline motors.
Product Brief: The S200 series is a compact, high-dynamic-response digital servo drive for brushless DC/AC servo motors. The -SRS suffix denotes standard I/O plus SynqNet motion network interface. Designed for plug-and-play commissioning with Kollmorgen AKM motors using Smart Feedback Device (SFD).
Product Brief: The S300 is a compact, full-digital brushless servo drive designed for high-precision position, velocity, and torque control. It integrates an onboard motion controller capable of storing up to 300 motion tasks and supports electronic gearing, homing modes, and camming. Optimized for use with AKM, Goldline, and other permanent-magnet synchronous motors.
Product Introduction: The MMC Smart Drive family are compact, standalone digital AC servo/vector drives with onboard motion controller capability. The MMC-SD-6.0-460 delivers 6.0 kW continuous at 460 V AC input and is typically used with larger AKM5x/AKM6x motors or Goldline BH/MH series. The "–D" suffix commonly indicates DeviceNet communications or a specific I/O/feedback configuration in the MMC legacy range.
Product Introduction: The SR series (sometimes referenced as part of Kollmorgen's intelligent drive lineage prior to AKD) provides microstepping control for 2-phase hybrid stepper motors, or in some contexts is a re-badged compact servo drive. The SR03000-000000 is a legacy part — modern equivalents are found in the Kollmorgen stepper drive (P5000 / P7000 series) or AKD with stepper mode. Some documentation lists it as a 3 A, 115/230 V AC input microstepping drive.
Product Name: Goldline® B-Series Permanent Magnet Brushless Servo Motor, Frame B-204 (≈92 × 92 mm flange), Stack Length 4 (long), Winding B, with optional 24 V DC brake and/or built-in DC tachogenerator (suffix "-24" historically denotes 24 V brake or tach-related option in Goldline B legacy catalog)
Product Introduction: The AKD-P02406-NBP is part of Kollmorgen's AKD platform — a high-performance Ethernet-based digital servo drive. The "P" denotes the base performance/platform with position indexer; "02406" = 24 A continuous, 480 V class; "N" = no internal shunt/brake resistor; "B" = basic I/O set; "P" = PROFINET (RJ45 X11 connector with 2 LEDs). Compatible with AKM, AKM2G, Goldline, and many third-party servo motors.
