Shop

You are here:
  1. Home
  2. Shop
  3. Page 287

YOKOGAWA NFAR181-S05

Product Introduction: The NFAR181-S05 is a 2-wire electromagnetic flowmeter designed for continuous measurement of conductive liquid flow rates in industrial process environments. It operates on Faraday's Law of Electromagnetic Induction, generating a voltage proportional to the flow velocity of the conductive fluid passing through the magnetic field. The 2-wire configuration simplifies wiring by combining power supply and signal output on a single pair of cables, delivering a 4–20 mA DC output signal.

YOKOGAWA DLM2022

Product Overview: The DLM2022 is a 2-channel mixed signal oscilloscope from Yokogawa's DLM2000 series, combining 2 analog channels (200 MHz bandwidth) with 16 digital logic channels in a single compact instrument. It is designed for embedded system debugging, power electronics analysis, automotive electronics testing, and education.

YOKOGAWA ZR402G-TEEA/SCT

Product Overview: The ZR402G-TEEA/SCT is a 4-channel RTD (Resistance Temperature Detector) input module for Yokogawa's ZR400 Series PLC. The 402 indicates 4 input channels, Type 2 configuration. The -G denotes the module generation/revision. The TEEA suffix specifies the input type as Thermocouple (T) + RTD (EE) mixed input with 4-wire connection, and SCT indicates a special configuration/customer-specific variant within Yokogawa's ordering system.

YOKOGAWA F3RP61-2L

Product Overview: The F3RP61-2L is a 2-channel relay output module for Yokogawa's F3 (FAST/TOOLS) Series PLC. The 61 indicates the RP61 series (relay output, 2-channel). The -2L suffix confirms 2 relay outputs with LED indicators per channel. This module provides dry contact (Form A) relay outputs for switching AC and DC loads in industrial control applications.

YOKOGAWA NFCP100-S05/S3

Product Overview: The NFCP100-S05/S3 is a Field Communication Adapter (FCA) manufactured by Yokogawa for HART and FOUNDATION Fieldbus (FF) protocol communication between field instruments and control systems (DCS/PLC). The S05 denotes HART communication capability, and S3 denotes FOUNDATION Fieldbus H1 protocol capability. This device acts as a protocol converter/bridge enabling legacy HART devices to communicate over Fieldbus or vice versa.

YOKOGAWA S5U709923

Product Overview: The S5U709923 is a spare part / replacement module for Yokogawa's F3 (FAST/TOOLS) and S5 Series Programmable Logic Controllers. This part number is a Yokogawa internal component identifier used for ordering replacement units. The exact module type corresponding to S5U709923 is a CPU memory unit or communication module within the S5 series product family. Based on Yokogawa part numbering conventions, S5U prefix indicates an S5-series utility/communication module.

YOKOGAWA DX2020-3-4-2

Product Overview: The DX2020-3-4-2 is a paperless (chartless) recorder from Yokogawa's DX2000 series. The model code breaks down as: DX2020 = base model with 20 recording channels capability; 3 = 3-slot main unit; 4 = 4 analog input channels; 2 = 2 alarm output channels. This instrument replaces traditional chart recorders with digital recording, display, and data management.

YOKOGAWA SPW482-13

Product Overview: The SPW482-13 is a recording paper roll specifically manufactured for Yokogawa paper-chart recorders and hybrid recorders (such as the DX/DXA series and MV series). The 482 indicates the paper width of 100 mm (4 inches), and 13 designates the specific roll configuration/grade in Yokogawa's consumable numbering system.

YOKOGAWA F3CX04-ON

Product Overview: The F3CX04-ON is a 4-channel analog input module for Yokogawa's F3 (FAST/TOOLS) Series Programmable Logic Controller (PLC). The 04 indicates 4 input channels. The -ON suffix denotes no local LCD display (non-display type). This module accepts 4–20 mA DC and 1–5 V DC input signals and converts them to 12-bit digital values for the PLC processor.

YOKOGAWA WT1806E

Product Overview: The WT1806E is a 6-channel high-precision digital power analyzer from Yokogawa's WT1800E series, engineered for accurate electrical power measurement in R&D, production testing, and energy efficiency evaluation. It supports simultaneous measurement across 6 input channels with exceptional accuracy and wide bandwidth.

YOKOGAWA DN100DY100-EAL SR4-2D/SY

Product Overview: The DY100 is a vortex shedding flowmeter manufactured by Yokogawa Electric Corporation, designed for precise volumetric and mass flow measurement of steam, liquids, and gases in industrial process environments. The DN100 designation indicates a 100 mm (4-inch) nominal bore diameter. The -EAL suffix denotes an Ex ia IIC T4 Ga explosion-proof (intrinsically safe) construction suitable for Zone 0 / Zone 1 hazardous areas. The SR4-2D/SY refers to the transmitter configuration with 4–20 mA DC output and pulse output, configured for 2-wire system power supply.

YOKOGAWA YS1700-021/A03

Product Introduction: The YS1700-021/A03 is a laser gas analyzer from Yokogawa's YS1700 product line, based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) technology. The "021" specifies the O2 (oxygen) measurement gas, and "A03" indicates the specific optical configuration and output variant for this model. This analyzer provides high-precision, in-situ oxygen measurement with zero cross-sensitivity to other gases, making it ideal for combustion control, safety monitoring, and process optimization.