Shop

You are here:
  1. Home
  2. Shop
  3. Page 83

GE 104X106MAG01

Product Name:​ GE Fanuc 90-30 / 90-70 Series Analog Input Module
Product Introduction:​ This module is an analog input I/O module designed by GE Digital (formerly GE Fanuc Automation) for the 90-30 / 90-70 programmable logic controller (PLC) series. It provides 16 independent analog signal acquisition channels for distributed control systems, SCADA data acquisition, and industrial process control.

GE 5BPA56RAG8

Product Name:​ GE Direct Current Motor (Permanent Magnet, 1 HP)
Product Introduction:​ Based on available parts distribution records, this model is identified as a GE permanent magnet DC electric motor. The "5BPA" nomenclature follows GE's DC motor frame size and specification coding.
Technical Specifications:
  • Horsepower:​ 1 HP

GE TG3226

Product Name:​ General Duty Safety Switch (Fusible Disconnect Switch)
Product Introduction:​ This is a general duty safety switch designed for residential and light commercial applications where duty is not severe. Listed to UL Standard 98 for enclosed and dead-front switches, it is suitable for use as service equipment when installed per the National Electrical Code.

GE IS420PFFAH1B

Product Name:​ Mark VIe Foundation Fieldbus I/O Module (FF H1)
Product Introduction:​ This module is a high-integrity Foundation Fieldbus I/O pack for GE's Mark VIe distributed control and turbomachinery systems. It enables digital communication between the control system and field devices (sensors, actuators) using the Foundation Fieldbus protocol, replacing traditional analog 4–20 mA signals.

GE IS420PVIBH1B

Product Name:​ Mark VIe Vibration I/O Pack (API 670 Compliant)
Product Introduction:​ This is a specialized high-speed vibration monitoring I/O pack engineered for the GE Mark VIe turbine control platform. It provides real-time machinery protection by acquiring dynamic signals from proximity probes, seismic sensors, and accelerometers on gas turbines, steam turbines, and industrial compressors.

GE 12CEH52A1DL

Product Name:​ GE CEH Series Single-Phase Relay (Loss-of-Excitation Relay)
Product Introduction:​ Based on the GE CEH52A platform, this device belongs to GE's family of single-phase protective relays. The CEH-type functions as a generator loss-of-excitation (LOE) protection relay, designed to detect the disappearance of synchronous machine excitation and initiate tripping action.

GE IS220YTCCS1A

Product Name:​ Mark VIe YTCC Millisecond Analog Module (Thermocouple Input Pack)
Product Introduction:​ This is a highly specialized simplex I/O pack developed for the GE Mark VIe platform. While some sources describe it as monitoring shaft voltage/current for turbine health diagnostics, the predominant configuration is a high-precision thermocouple input module that interfaces specialized analog turbine sensors with the IONet control fabric.

GE DS200NATOG2A

Product Name:​ Voltage Feedback Scaling Board (NATO), G2 Group Variant
Product Introduction:​ This board is a precision voltage attenuation hub designed for LS2100 Static Starter and Mark V Speedtronic control systems. It attenuates high AC phase voltages and DC bus voltages from SCR bridges, converting 1200–6900 V inputs to scaled low-voltage signals for control system processing.

GE DS3800NSCD1B1C

Product Name:​ Mark VIe Dual-Channel Serial Communication Termination Board (Ruggedized)
Product Introduction:​ This is a ruggedized, dual-channel serial communication termination board designed for harsh industrial environments. The "1B" revision upgrades surge suppression to 1.5kW TVS diodes, while the "1C" revision adds reinforced through-hole terminal anchoring and a high-Tg PCB for extended temperature operation.

GE IS200EDFFH2A

Product Name:​ DC Fanned Feedback Board (EX2100e Excitation Control System)
Product Introduction:​ This board is a critical I/O terminal board within GE's EX2100e excitation platform. The "H2" group variation denotes a dual-system configuration, providing enhanced redundancy and reliability for field current and voltage feedback in exciter control applications.

GE 137D6723G1

Product Name:​ GE 137D6723G1 Multifunction Overcurrent Protection Relay
Product Introduction:​ The GE 137D6723G1 is a multifunction digital overcurrent protection relay. It integrates 50/51 overcurrent protection, 50G/51G residual overcurrent protection, 27 over/undervoltage protection, and 81O/81U over/underfrequency protection in a single 1/4 DIN panel-mount device. It is used for the protection of medium/high-voltage distribution systems and industrial motors.

GE DS3800HUMA1B1C

Product Name:​ GE DS3800 HUMA Universal Memory / Data-Processing Board (Mark IV Speedtronic)
Product Introduction:​ The GE DS3800HUMA1B1C is a memory / data-processing board (auxiliary microprocessor unit) for GE's Mark IV Speedtronic turbine control system and EX2000 exciter control racks. It hosts a local microprocessor and battery-free memory, bridging high-speed data between the CPU and remote I/O cards while isolating 5 V logic from 480 V field circuits.