Product Introduction: The NFCP100-SS3 is a compact flow computer designed for custody transfer, energy measurement, and process flow totalization. It accepts inputs from flowmeters (pulse, 4-20 mA, frequency), temperature sensors (RTD, TC), and pressure transmitters to compute compensated mass/volumetric flow, totalized flow, and energy content. The "SS3" suffix denotes the specific input/output and communication configuration.
Product Series: EJA430E — DPharp Digital Pressure Transmitter Product Introduction: The EJA430E-JBS4815 is a high-performance absolute pressure transmitter using Yokogawa's DPharp (Digital Phase Measurement) single-crystal silicon resonant sensor technology. The "JBS" indicates a low-range absolute pressure model, and "4815" defines the specific output, process connection, and material configuration. It provides superior accuracy, stability, and fast response for absolute pressure measurement.
Product Introduction: The MV20MV2010-3-4-1 is a Coriolis-type mass flowmeter that directly measures mass flow rate, fluid density, and temperature simultaneously. The model code breaks down as: MV20 = Coriolis series, MV2010 = 10 mm nominal bore, "3" = output/communication option, "4" = process connection option, "1" = special configuration. It uses the DPharp (Digital Phase Measurement) sensor technology for high accuracy and stability.
Product Introduction: The SDV551-P10 is a smart digital valve controller designed to operate pneumatic control valves (globe, butterfly, ball valves) with high precision. It accepts a 4-20 mA control signal from a DCS/PLC and converts it to a proportional pneumatic output signal to the valve actuator. The P10 suffix defines the specific input/output range and diagnostic configuration.
Product Series: UT450 Advanced Indicating Controller Product Introduction: The UT450-04/Z is a 1/4 DIN (96 × 96 mm) advanced panel-mount controller with 4 universal inputs, 3 relay outputs, 2 analog outputs, and Ethernet/RS-485/USB communication. The "04" denotes 4 control loops, and "Z" indicates the grounding terminal. It is designed for complex multi-variable process control in a compact footprint.
Product Series: UT35 Universal Indicating Controller Product Introduction: The UT35-A13501-A/RET1/RLEX/SPD/Z is a 1/8 DIN (96 × 48 mm) panel-mount universal controller with relay output, extended function, and specific configuration options. It accepts multiple input types and provides ON/OFF or PID control with relay and analog outputs. The suffix codes define: A13501 = input/output configuration, RET1 = relay output type, RLEX = extended relay function, SPD = serial communication option, Z = grounding terminal.
Product Series: STLD301 Smart Temperature Transmitter Product Introduction: The STLD-301-E/MTS/PD/DL/Z is a 2-wire smart temperature transmitter featuring advanced process diagnostics (PD), user-configurable damping and linearization (DL), and ground terminal (Z). The "PD" option provides sensor fault detection, "DL" enables custom input linearization and output damping, and "Z" includes a dedicated grounding terminal for noise reduction.
Product Overview: The STLD-301*E/MTS/PA is a 2-wire, loop-powered smart temperature transmitter from Yokogawa's STLD300 series. It supports thermocouple (TC) and resistance temperature detector (RTD) sensors with Multi-Sensor Technology (MTS) allowing field reconfiguration between sensor types. The suffix breakdown: *E = HART 7 communication, MTS = Multi-Sensor Technology, PA = Intrinsically Safe (Ex ia IIC T4 Ga).
Product Category: Analog Voltage Input Module for Programmable Logic Controllers Product Overview: The F3LE12-0T is a 12-channel analog voltage input module designed for the Yokogawa F3 and F7 series PLC platforms. The "0T" suffix designates the 0–10 V DC input range with 12-bit resolution. This module digitizes low-level voltage signals from field sensors (pressure transmitters, level transmitters, flow meters, etc.) for PLC processing.
Product Category: Analog Input Module for Programmable Logic Controllers Product Overview: The LAI143-H53 is a 16-channel analog input module designed for the Yokogawa FA-M3 series PLC systems. It accepts 16 channels of 4–20 mA DC current input signals and converts them to digital values for processing by the PLC CPU. The H53 suffix specifies the 16-channel, 4–20 mA input configuration with 12-bit resolution.
Product Overview: The NFLR121-S01 is a plug-in type noise filter manufactured by Yokogawa Electric Corporation. It is specifically engineered to eliminate high-frequency noise and electromagnetic interference (EMI/RFI) superimposed on analog signal transmission lines, particularly 4–20 mA DC current loop signals. The S01 suffix designates the plug-in (S-type) mounting configuration, enabling direct insertion into DIN rail terminals or junction boxes without additional wiring.
Product Type: Compact AC Servo Drive / Amplifier Product Introduction: The SGD7S-200A00B2 is a compact, economical servo drive from Yokogawa's Sigma-7 product line. It is designed for single-axis servo motor control in applications requiring space-saving installation. The model code represents a specific power rating and configuration.
