Free Air Delivery (FAD): 4240 L/min (4.24 m³/min)

Working Pressure: 13 bar (189 psi) — Code 0443

Drive Type: Direct-Driven / Belt-Driven Screw Element

Cooling Method: Air-Cooled

Oil Classification: 100% Oil-Free (ISO 8573-1 Class 0)

ISO Purity Class: Class 0 — Zero oil content

Controller: Elektronikon MK5 Touch Controller (Version 81 — full connectivity)

Networking Capability: Yes (Version 81 — Elektronikon Central)

Rotor Type: Non-contacting stainless steel rotors, wear-resistant coating

Motor Efficiency Class: IE3 / IE4 (depending on motor configuration)

Sound Level: 68 dB(A)

Dimensions (L×W×H): 1850 × 1100 × 1450 mm (approximate)

Weight: ~980 kg

Structure Features:

• Full stainless steel compression chamber
• High-pressure rated air-end (13 bar design)
• Integrated aftercooler with moisture separator
• Sound-attenuated enclosure
• Vibration-isolated mounting

Working Principle:
Oil-free screw compression at elevated pressure of 13 bar. Air enters, is compressed by non-contacting rotors, separated, and cooled. The Elektronikon MK5 controller modulates inlet valve for demand-matched output. No oil is introduced at any stage.

Key Features:

• 13 bar working pressure — highest in TC52S range
• Class 0 oil-free — suitable for highest-purity applications
• Version 81 — full network connectivity, energy monitoring
• Load modulation — energy savings up to 35%

Advantages:

• Delivers high-pressure oil-free air in a single unit
• Eliminates need for external boosters in 13 bar applications
• Zero oil contamination at any pressure level
• Networked for remote optimization

Applicable Industries:

• High-Pressure Pneumatic Tools (oil-free required)
• PET Bottle Blowing
• Laser Cutting (assist gas)
• Medical Air Systems (high pressure)
• Paint Spraying (HVLP, oil-free)
• Nitrogen Generation Feed (as clean air source)

Installation Requirements:

• Indoor, well-ventilated
• Ambient: 0°C to +45°C
• Electrical: 400V / 3Ph / 50Hz
• Floor load: ≥1200 kg
• Intake filter: Atlas Copco Fx series (mandatory)
• Clearance: 1.0 m intake, 0.7 m discharge
• Condensate drain

Usage Precautions:

• Max working pressure: 13 bar — do not exceed
• Air filter: every 4000 hours
• Monitor separator differential pressure — replace at ΔP > 0.3 bar
• Ensure intake air is clean and dry
• Annual full inspection required