Shop

You are here:
  1. Home
  2. Shop
  3. Page 677

AEG A332-03 Series Industrial Grade Intermediate Relay

  • Product Introduction: This is a 3-pole double-throw (3PDT) industrial grade intermediate relay of the AEG A332 series, with 24 VDC low-voltage coil, designed for signal isolation, amplification and conversion in industrial control systems. It adopts a high-sensitivity electromagnetic coil, silver alloy contact, and flame-retardant plastic enclosure, with high contact capacity, long service life and strong anti-vibration performance, and is an essential intermediate control component for connecting PLC low-current output signals and high-current field actuators in industrial control systems.
  • Technical Specifications:
    • Contact Configuration: 3 pole double throw (3PDT), 3 normally open (NO) + 3 normally closed (NC) contacts, independent contact action.
    • Coil Parameter: 24 VDC rated voltage, coil resistance 144 Ω, rated current 167 mA, power consumption 4 W, insulation resistance ≥100 MΩ.
    • Contact Capacity: AC 250 V / 10 A (resistive load), AC 250 V / 5 A (inductive load), DC 30 V / 5 A (resistive load); Mechanical life ≥100 million times, electrical life ≥1 million times.
    • Switching Time: Operate time ≤15 ms, release time ≤10 ms; Vibration Resistance: 10-55 Hz, 1.5 mm amplitude (IEC 60068-2-6).

AEG AM-C916-100 Series 16-Channel Digital Output Module

  • Product Introduction: This is a 16-channel 24 VDC digital output module of the AEG AM-C916 series, dedicated to AEG Modicon 900 series medium and large PLC systems, designed for driving industrial field 24 VDC digital actuators such as solenoid valves, relays, indicator lights and contactors. It adopts PNP sourcing output design, high-current output per channel, and built-in overcurrent and short-circuit protection, converting PLC digital control signals into on-site driving signals, and is a core output module for medium and large industrial control systems with multi-channel digital output requirements.
  • Technical Specifications:
    • Output Channels: 16 independent 24 VDC digital output channels, divided into 4 common groups of 4 channels each, independent power supply per group.
    • Output Type: PNP sourcing output, high-side switching, compatible with most 24 VDC industrial digital actuators.
    • Rated Output Voltage: 24 VDC ±15%; Rated Output Current: 2 A per channel, 8 A per common group, peak current 5 A (100 ms).
    • Switching Time: ≤1 ms (on/off); Output Load: Resistive, inductive, capacitive load, inductive load suppression built-in freewheeling diode.
    • Protection Functions: Per-channel short-circuit protection, overcurrent protection, reverse polarity protection, all protection functions self-recovering.

AEG ALUMINIUM152 Series Heavy-Duty Aluminum Alloy Terminal Block

  • Product Introduction: This is a 1-pole heavy-duty industrial grade aluminum alloy terminal block of the AEG ALUMINIUM152 series, designed for the connection of large-section aluminum alloy cables in industrial high-power power distribution and control systems. It adopts a thickened aluminum alloy conductor, double screw compression clamping structure, and high-strength flame-retardant insulation shell, with high current carrying capacity, strong connection stability and good anti-oxidation performance, and is a core connection accessory for large-section aluminum cable wiring in industrial heavy-duty power distribution systems.
  • Technical Specifications:
    • Pole Quantity: 1 heavy-duty pole, double-wire parallel connection design (in/out), support two same-section cables connection.
    • Conductor Material: Thickened high-purity aluminum alloy (6061-T6), surface with electroplated nickel anti-oxidation treatment, contact resistance ≤30 μΩ.
    • Insulation Material: BMC unsaturated polyester resin, UL94 V-0 flame retardant grade, CTI ≥650 V, anti-fracture and high temperature resistance.
    • Rated Voltage: 1000 V AC/DC; Rated Current: 150 A (at 40°C), derating to 120 A at 70°C.
    • Cable Range: Aluminum alloy cable 50 mm² to 150 mm², compatible with copper cable 35 mm² to 120 mm² (copper-aluminum transition).

AEG ALU202 Series Industrial Grade Aluminum Alloy Terminal Block

  • Product Introduction: This is a 2-pole industrial grade aluminum alloy terminal block of the AEG ALU202 series, specially designed for the connection of aluminum alloy cables in industrial power distribution and control systems. It adopts a special aluminum alloy conductor clamping structure, anti-oxidation surface treatment, and flame-retardant insulation shell, solving the problems of aluminum cable oxidation, poor contact and large contact resistance in traditional connections, and is a professional connection accessory for aluminum alloy cable wiring in industrial high-current power distribution systems.
  • Technical Specifications:
    • Pole Quantity: 2 independent poles, single-pole single-wire connection design, no mutual interference between poles.
    • Conductor Material: High-purity aluminum alloy (6063-T5), surface with electroplated tin anti-oxidation treatment, contact resistance ≤50 μΩ.
    • Insulation Material: PA66 flame-retardant engineering plastic, UL94 V-0 flame retardant grade, CTI ≥600 V, high temperature resistance.
    • Rated Voltage: 1000 V AC/DC; Rated Current: 95 A (at 40°C), derating to 76 A at 70°C.
    • Cable Range: Aluminum alloy cable 16 mm² to 95 mm², compatible with copper cable 10 mm² to 70 mm² (copper-aluminum transition).

AEG S975-000 Series High-Performance PLC Chassis

  • Product Introduction: This is a 10-slot industrial-grade PLC chassis of the AEG S975 series, engineered as the core hardware carrier for AEG Modicon medium-sized PLC systems, providing a standardized backplane bus and power distribution for various I/O modules, communication modules, and functional modules. It adopts a rugged metal enclosure design, high-speed backplane bus architecture, and redundant power supply support, ensuring stable and reliable operation of the entire PLC system in harsh industrial environments, and is a key infrastructure component for building medium-scale industrial control systems.
  • Technical Specifications:
    • Slot Quantity: 10 standard I/O slots, compatible with all AEG Modicon 800/900 series modular PLC modules.
    • Backplane Bus: High-speed parallel bus, transmission rate 10 Mbps, support real-time data exchange between modules.
    • Bus Isolation: 2500 VAC electrical isolation between backplane bus and external circuits, anti-interference attenuation ≥80 dB at 1 MHz.
    • Power Supply Interface: Dual 24 VDC power input (redundant design), support hot swap of power supply modules, input current ≤10 A.
    • Enclosure Material: Cold-rolled steel sheet with electrostatic spraying, IP20 protection rating, anti-corrosion and anti-vibration.
    • Mounting Method: Standard 35mm DIN rail mounting + panel mounting, double fixed for industrial site stability.

AEG AS-BDAP-21 High-Precision Single-Channel Analog Output Module

  • Product Introduction: This is a high-precision single-channel 12-bit analog output module of the AEG Modicon series, designed for converting the digital control signal output by the PLC CPU into a high-precision standard analog voltage/current signal to drive a single industrial field precision actuator such as electric regulating valves and precision frequency converters. It features high conversion accuracy, low signal drift and strong driving capacity, and is a core module for high-precision single-channel analog control in industrial process control systems that require precise regulation of a single process parameter.
  • Technical Specifications:
    • Output Channel: 1 independent high-precision analog output channel, dedicated to single signal output.
    • Output Signal Types: 4-20 mA DC current, 0-10 VDC voltage (software configurable, seamless switching).
    • Resolution: 12-bit; Output Accuracy: ±0.05% of full scale at 25°C, ±0.1% over the entire operating temperature range.
    • Signal Drift: ≤20 ppm/°C (temperature drift), ≤0.01% FS/year (time drift), ultra-low drift for long-term stable output.
    • Output Load Capacity: Current output ≤500 Ω, voltage output ≥1 kΩ, strong driving capacity for field actuators.

AEG BM85S232 Industrial RS-232 Serial Communication Module

  • Product Introduction: This is a dedicated industrial RS-232 serial communication module of the AEG BM85 series, designed for realizing RS-232 serial communication between AEG Modicon PLC systems and various RS-232 standard equipment such as programming terminals, HMIs, printers and barcode scanners. It features industrial-grade electrical isolation, strong anti-interference performance and stable communication, and converts the PLC backplane bus signal into standard RS-232 serial signal, serving as a core communication accessory for the connection between Modicon PLC systems and RS-232 peripheral equipment.
  • Technical Specifications:
    • Communication Standard: RS-232C (EIA/TIA-232), support full-duplex communication.
    • Communication Interface: DB9 female connector (standard RS-232 interface), with screw locking structure for firm connection.
    • Transmission Rate: 300 bps-115200 bps, software configurable, adaptive baud rate.
    • Transmission Distance: Up to 15 meters, in line with RS-232 standard transmission distance.
    • Data Format: 7/8 data bits, 1/2 stop bits, odd/even/no parity, all software configurable.

AEG PC-E984-255 Modicon 984 Series Industrial Ethernet Programming & Communication Station

  • Product Introduction: This is a high-performance industrial Ethernet programming and communication station dedicated to the AEG Modicon 984 series medium and large PLC systems, integrating industrial computer hardware, dedicated programming software, industrial Ethernet communication and multi-protocol conversion functions. It features a high-performance industrial processor, a large-size display and a rich communication interface, realizing high-speed program download/upload, online real-time debugging, remote monitoring and multi-protocol communication of the Modicon 984 series PLC system, and is a core engineering tool for the design, debugging and remote management of large-scale Modicon 984 series PLC control systems.
  • Technical Specifications:
    • Processor: Intel Core 2 Duo industrial-grade processor, operating frequency 2.0 GHz, with dedicated industrial control chipset.
    • Memory: 2 GB DDR2 industrial RAM (expandable to 4 GB), 160 GB industrial solid state drive (SSD) for software and program storage.
    • Display: 15-inch industrial color TFT LCD screen, resolution 1024×768 pixels, with anti-glare and backlight function, backlight life ≥60,000 hours.
    • Input Device: Industrial membrane keypad + industrial trackball mouse, dustproof, waterproof and anti-vibration, suitable for industrial field operation.

AEG ZAE105 Industrial Grade Power Supply Surge Protection Module

  • Product Introduction: This is a dedicated industrial grade power supply surge protection module of AEG, designed for protecting AEG Modicon PLC systems and other industrial control equipment from damage caused by power supply line surges and transients such as lightning strikes and grid fluctuations. It is installed at the power input end of the industrial control cabinet, with fast response speed and high surge absorption capacity, which can clamp the surge voltage on the power supply line to a safe range, and is an essential safety protection accessory for industrial control equipment in harsh power grid environments.
  • Technical Specifications:
    • Protection Circuit: Three-stage surge protection circuit (gas discharge tube, varistor, TVS diode), multi-level absorption of surge energy.
    • Protected Voltage: 24 VDC (for PLC system power supply), compatible with 115/230 VAC input power supply of industrial power supplies.
    • Surge Absorption Capacity: 20 kA (8/20 μs impulse current), 10 kA (10/350 μs lightning impulse current).
    • Response Time: ≤1 ns, ultra-fast response to clamp surge voltage in time.
    • Clamping Voltage: ≤36 VDC for 24 VDC side, effectively limiting the surge voltage to the safe working range of PLC equipment.
    • Insertion Loss: ≤0.1 dB at 50/60 Hz, no impact on the normal power supply of the equipment.
    • Power Supply: No additional power supply required, powered by the protected power supply line.

AEG AS-B838-032 Digital Input Module

  • Product Introduction: This is a 32-channel high-density 24 VDC digital input module of the AEG Modicon 800 series, engineered for collecting a large number of 24 VDC digital switching signals from industrial field devices such as limit switches, pushbuttons, proximity sensors and photoelectric sensors. It features a high-density channel design, which greatly saves the installation space of the PLC chassis, and converts field digital signals into logic signals recognizable by the PLC CPU, serving as a core module for large-scale digital signal acquisition in industrial automation control systems with a large number of input points.
  • Technical Specifications:
    • Input Channels: 32 independent 24 VDC digital input channels, divided into 4 common groups of 8 channels each.
    • Input Type: Sinking input (NPN type), support dry/wet contact input, compatible with most 24 VDC field switching devices.
    • Input Voltage: 18-30 VDC; Turn-on Threshold: 11-15 VDC; Turn-off Threshold: 0-5 VDC.
    • Input Current: 2 mA at 24 VDC; Response Time: ≤10 ms (on and off), support adjustable filter time (1-100 ms).

AEG AS-B885-002 Universal Signal Type

  • Product Introduction: This is an 8-channel 14-bit universal analog input module of the AEG Modicon 800 series, designed for collecting multi-channel standard and non-standard analog signals from industrial field sensors and transmitters. It supports a variety of universal voltage and current signal types, with moderate resolution and high cost performance, and converts analog signals into digital signals for transmission to the PLC CPU, serving as a cost-effective core module for multi-channel analog signal acquisition in medium-precision industrial process control systems.
  • Technical Specifications:
    • Input Channels: 8 independent analog input channels, divided into 2 common groups, support single-ended input.
    • Signal Types: Universal signal input, support 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC (hardware configurable by DIP switch per group).
    • Resolution: 14-bit; Conversion Accuracy: ±0.1% of full scale at 25°C, ±0.2% over the entire operating temperature range.
    • Conversion Time: ≤80 μs per channel, support batch sampling of channels in the same group.
    • Isolation: 2500 VAC electrical isolation between channels and backplane bus, 1500 VAC isolation between channels in the same group.

AEG S74D-VB0-F0V0 Series CANopen Dedicated Fieldbus Gateway Module

  • Product Introduction: This is a CANopen dedicated intelligent fieldbus gateway module of the AEG S74D series, optimized for the CANopen fieldbus system, realizing high-speed protocol conversion and data exchange between CANopen and Modbus RTU/TCP, Profibus-DP, Ethernet/IP and other mainstream industrial communication protocols. It is specially designed to expand the connection range of the CANopen system, connect non-CANopen standard industrial equipment to the CANopen bus, and realize the seamless integration of the CANopen bus system with other industrial control networks, serving as a core device for CANopen bus system networking and expansion.
  • Technical Specifications:
    • Main Bus Interface: CANopen V2.0A/V2.0B, support 10 kbps-1 Mbps adaptive baud rate, up to 127 nodes connected.
    • Expansion Interfaces: 2×Ethernet (10/100 Mbps RJ45, Modbus TCP/Ethernet/IP), 2×RS-485 (Modbus RTU), 1×Profibus-DP, all ports work independently.
    • Processor: 32-bit ARM Cortex-M industrial processor, operating frequency 180 MHz, with CANopen dedicated communication driver and protocol conversion algorithm.
    • Data Processing Capacity: Up to 1000 CANopen data objects (PDOs/SDOs) for simultaneous transmission, data update rate ≤3 ms.