Shop

You are here:
  1. Home
  2. Shop
  3. Page 519

Moog D061-851A Hydraulic Servo Valve

  • Product Introduction: This is a hydraulic servo valve with excellent performance produced by Moog. It can accurately convert electrical signals into hydraulic signals, so as to control the movement of the actuator. The product has a reasonable structural design and reliable performance, and can adapt to the needs of various industrial control systems.

Moog D633-3051 Series Direct Drive Servo Valve

  • Product Introduction: This product is a member of the D633 series of Moog direct drive servo valves. It adopts a direct drive design, which avoids the leakage loss of the pilot stage, and the dynamic response is independent of the supply pressure. At the same time, it also greatly improves the anti-pollution ability of the valve. The product is mainly used to control the position, speed, pressure or force in the hydraulic system.

Moog G412-405A Proportional Valve

  • Product Introduction: As a proportional valve of Moog, this product can realize the proportional control of flow and pressure according to the input electrical signal. It combines the advantages of servo valves and ordinary valves, and has the characteristics of high control precision and low cost. The product has a wide range of applications and can be adapted to different working conditions.

Moog J073-201 Hydraulic Control Valve

  • Product Introduction: This is a hydraulic control valve independently developed and produced by Moog. It integrates advanced hydraulic control technology and structural design, and can effectively adjust the flow, pressure and direction of the hydraulic oil in the hydraulic system. The product has the advantages of simple operation and convenient maintenance, and is suitable for various hydraulic control systems.

Moog D661-5208/D6615208 Series Electro-Hydraulic Servo Valve

  • Product Introduction: This product belongs to the D661 series of Moog servo valves, which is a high-performance electro-hydraulic servo control valve. Its working principle is based on electro-hydraulic conversion. It converts electrical signals into hydraulic signals, and then realizes the control of the actuator through the hydraulic control system. The product has been optimized and improved in terms of structure and performance, and can meet the needs of various complex industrial control occasions.

Moog D651-439D Electro-Hydraulic Servo Valve

  • Product Introduction: As a high-performance electro-hydraulic servo valve under Moog, it is mainly used to convert electrical signals into hydraulic energy, so as to accurately control the flow and pressure of the hydraulic system. The product has the characteristics of compact structure and stable operation, and can maintain good working performance in various harsh working environments.

Moog D644-535 Servo Control Valve

  • Technical Specifications: The standard nominal flow rate at 70 bar is 16 l/min; the maximum operating pressure is 350 bar; the ambient temperature range is -20 to +80 °C; the input signal is 4 to 20 mA; the power supply voltage is 15 VDC; the maximum pilot stage pressure is 15-210 bar.

Moog D061-603C/D061603C Servo Controller

  • Product Introduction: It is a servo controller under the Moog brand, mainly used to control servo systems to achieve precise positioning and motion control. It can provide advanced control capabilities for servo motors, ensuring the stable operation of mechanical equipment.

Moog MS3106F-14S-2S 49054F014S002S Series Circular Connector

  • Product Introduction: It is a waterproof and dustproof circular connector that meets the US military standard MIL-STD. With an IP67 protection level, it can be safely used in humid environments where other connectors cannot work normally. It adopts a soldering method for wire connection and can be connected to relay adapters and panel-mounted sockets.

Moog D661-5046 Pilot-Operated Servovalve for Analog Signals

  • Product Introduction: It is a member of the Moog D661 series of servo valves, which integrates electronics and an analog interface. The valve core slides in the bushing and is hydraulically pilot-controlled. It is designed to meet the most demanding application requirements and can provide high dynamic performance. It can convert electrical signals into hydraulic signals and then control the actuator through a hydraulic control system to achieve precise control of displacement, speed, etc.

Moog D312-002A/D312002A Industrial Valve

  • Product Introduction: This product is inferred to be an industrial valve of Moog. Moogs industrial valves are widely used in industrial hydraulic systems, playing the roles of controlling fluid flow direction, pressure, and flow. This valve may have a unique structural design and working principle to meet the specific needs of different application scenarios.

Moog WDMVP4D252-pI Motion Control Component

  • Product Introduction: There is limited public information about this product, and it is inferred to be a motion control component of Moog. Moogs motion control components cover a variety of types, which are widely used in various motion control systems to ensure the precise control and stable operation of the system. This component may integrate multiple functions such as drive, control, and feedback.