Shop

You are here:
  1. Home
  2. Shop
  3. Page 450

Woodward 5485-016

Product Name: Woodward 5485-016 Synchronizer Actuator Drive Unit with Mounting Bracket
Product Introduction: Original factory dedicated actuator drive module for SPM-D series synchronizers, converts synchronization control signals into mechanical speed bias adjustment outputs.
Technical Specifications:
  • Power Supply: 24 VDC

Woodward WFSR1.0

Product Name: Woodward WFSR1.0 Digital Speed Feedback Signal Conditioning Module
Product Introduction: Specialized signal processing module for Woodward governor speed detection, filters, amplifies and isolates MPU magnetic pickup speed feedback signals.
Technical Specifications:
  • Power Supply: 24 VDC

Woodward XU2-AC

Product Name: Woodward XU2-AC Multi-Functional AC Voltage/Frequency Protection Relay
Product Introduction: Industrial digital voltage and frequency monitoring protection relay, integrates overvoltage, undervoltage, overfrequency, underfrequency detection and relay output protection functions.
Technical Specifications:
  • Measurable Voltage Range: 100/110/230/400 VAC rated, 36–520 VAC measurable range

Woodward 8561-487

Product Name: Woodward 8561-487 Mechanical-Hydraulic Governor Servomotor Power Cylinder
Product Introduction: Original factory hydraulic power output actuator for Woodward TG/UG series mechanical governors, executes governor control signals to adjust engine fuel racks or turbine steam valves.
Technical Specifications:
  • Operating Hydraulic Pressure: 100 PSI

Woodward QRSN-1

Product Name: Woodward QRSN-1 Bolt-On SFI Certified Steering Wheel Quick Release Disconnect
Product Introduction: Professional racing safety steering quick disconnect component, SFI 42.1 certified heavy-duty steel structure, dedicated for circle track racing and off-road racing vehicle safety steering systems.
Technical Specifications:
  • Material: High-strength carbon steel, cadmium anti-corrosion plating

Woodward DPG2201

Product Name: Woodward DPG2201 Digital Isochronous/Droop Dual-Mode Load-Sharing Governor Controller
Product Introduction: Upgraded full-digital microprocessor speed & load control unit, official standard model of DPG-2201 series, supports both constant speed isochronous and droop parallel control modes.
Technical Specifications:
  • Power Supply: 9–30 VDC wide voltage input

Woodward SST-DN4-104-2

Product Name: Woodward SST-DN4-104-2 DeviceNet PC/104 Communication Interface Module
Product Introduction: Industrial-grade 2-channel DeviceNet communication adapter based on PC/104 standard architecture, dedicated for data exchange between Woodward governor/controller systems and industrial DeviceNet fieldbus networks.
Technical Specifications:
  • Main Processor: 64 MHz NIOS embedded processor

Woodward TYPEUG-8

Product Name: Woodward TYPEUG-8 Classic Mechanical-Hydraulic Engine Governor
Product Introduction: Original classic UG8 mechanical hydraulic governor, mature stable mechanical speed control unit for diesel/gas engines, standard base model of UG series.
Technical Specifications:
  • Maximum Terminal Shaft Travel: 42°

Woodward TYPEUG-10D

Product Name: Woodward TYPEUG-10D UG Series Digital Electronic Mechanical-Hydraulic Engine Governor
Product Introduction: Digital upgraded UG series integrated governor, combined microprocessor electronic control and mechanical hydraulic power amplification, dedicated for high-power diesel/gas engine speed & load controlWoodward.
Technical Specifications:
  • Maximum Output Travel: 42° terminal shaft travelWoodward

Woodward TG-17ED 8516-053

Product Name: Woodward TG-17ED 8516-053 Digital Electronic Enhanced Mechanical-Hydraulic Governor
Product Introduction: Full-featured electronic digital upgraded model of TG-17E, built-in electronic speed detection module, optimized dynamic response and digital signal control logicWoodward.
Technical Specifications:
  • Rated Output Torque: 23.7 N·m (17.5 lb-ft)

Woodward TG-17A 8516-045

Product Name: Woodward TG-17A 8516-045 Heavy-Duty Mechanical-Hydraulic Turbine Governor
Product Introduction: High-torque upgraded version of TG-13 series, enhanced mechanical hydraulic governor for larger steam turbines; same installation structure as TG-13 with higher output capacityWoodward.
Technical Specifications:
  • Drive Shaft Speed Range: 1200–4000 RPM

Woodward TG-13 8516-038

Product Name: Woodward TG-13 8516-038 Mechanical-Hydraulic Droop Turbine Governor
Product Introduction: Classic self-contained mechanical-hydraulic speed governor compliant with API611 standard, dedicated for small-to-medium steam turbine speed droop control; integrated internal oil supply system, no external hydraulic power required.
Technical Specifications:
  • Drive Shaft Speed Range: 1200–2400 RPM