Shop

You are here:
  1. Home
  2. Shop
  3. Page 173

Kollmorgen AKM43K-SSCNEH02

Product Introduction:
The AKM43K-SSCNEH02​ is an AKM series motor with Size 43 flange​ (slightly smaller than 44, approx. same 84mm class but different stack options) and Length K (long stack, high torque). "SSCNEH02" decodes roughly to: SS​ = Smart Feedback Device (SFD) or specific encoder, C​ = Connector type, N​ = No brake, E​ = Standard oil seal, H02​ = Winding/Voltage variant.

Kollmorgen VFS5-275-00120

Product Introduction:
The VFS5​ series is a legacy line of servo amplifiers​ (drives) often used in Cincinnati Machine​ and other applications (machining centers). The VFS5-275-00120 is a specific configuration, likely 275V class​ or 275A related​ (though 275A is high, possibly 27.5A or voltage rating) with firmware/hardware revision 00120.

Kollmorgen CR10660

Product Name:​ Cable Assembly or Connector Kit (CR = Cable/Connector)
Product Introduction:
CR10660​ is typically a cable or connector accessory​ part number in Kollmorgen's catalog. "CR" usually stands for Cable, Round​ or Connector Right-angle. This is likely a motor power or feedback cable​ assembly for AKM or Goldline series motors.

Kollmorgen BH-826-D-41

Product Name:​ Industrial Brake or Specialized Motion Component (B-Series/H-Series related)
Product Introduction:
The BH-826-D-41​ likely refers to a Fail-Safe Holding Brake​ compatible with Kollmorgen B-series or H-series motors, or a specific legacy component. "BH" typically denotes Brake, Holding. It is a spring-applied, electrically released device.

Kollmorgen SR20200-2G407B

Product Name:​ SR Series High-Resolution Resolver or Servo Component
Product Introduction:
The SR prefix often denotes Resolvers​ or specific Servo Motors/Amplifiers​ in older Kollmorgen nomenclature. For SR20200-2G407B, it is commonly identified as a High-Resolution Resolver​ (size 20) or a legacy Servo Motor (NEMA 20 frame)​ used for position feedback or actuation.

Kollmorgen AKM44E-ANCN2-N2

Product Name:​ AKM Series Synchronous Servo Motor (Size 44 Frame, Length E, with Brake & EnDAT)
Product Introduction:
The AKM44E-ANCN2-N2 is a high-power density synchronous servo motor​ with a 84mm flange (Size 44)​ and Length E (medium-long stack). It includes a 24V holding brake​ and EnDAT 2.2 absolute encoder. It is designed for seamless integration with AKD drives.

Kollmorgen B-104-A-99-043

Product Name:​ Goldline® B Series Permanent Magnet Servo Motor (Size 1 Frame)
Product Introduction:
This is a Size 1 frame​ member of the Goldline B series, representing a smaller form factor than the B-204. It is designed for applications requiring compact size with moderate dynamic performance. The "A-99-043" denotes specific winding, stack length, and option codes.

Kollmorgen B-204-A-29-088

Product Name:​ Goldline® B Series Low-Inertia Permanent Magnet Servo Motor
Product Introduction:
The B-204-A-29-088 belongs to the Goldline B series, featuring a Size 2 frame​ and Stack Length 4. It is a low-inertia, high-dynamic response brushless servo motor utilizing rare-earth permanent magnets, designed for rapid acceleration/deceleration cycles.

Kollmorgen AKD-P01207-NBP

Product Introduction:
Similar to the NBAA variant but configured with Position Indexer (Motion Tasking)​ capabilities and PROFINET​ communication support. The "P" suffix typically denotes PROFINET or specific fieldbus options in AKD nomenclature. It is optimized for synchronized multi-axis motion control systems.

Kollmorgen AKD-P01207-NBAA

Product Introduction:
The AKD-P01207-NBAA is a high-performance Ethernet-based servo drive from Kollmorgen's AKD series, rated at 12A continuous output​ and 8kW continuous power. It is designed for mid-range industrial automation applications requiring precise motion control. This model features built-in regenerative braking resistors and supports incremental encoder feedback with CANopen communication.

Kollmorgen AKD-P01207-NBCR

Product Name:​ AKD Series Servo Drive, Position Indexer, 12 A, 240/480 V AC, with Regenerative Resistor​
Product Introduction:​ Very similar to AKD-P01207-NBC but “R” at the end explicitly denotes internal regenerative braking resistor included. This avoids needing an external resistor for moderate regenerative loads.

Kollmorgen PMA240-1050B-02

Product Name:​ PMA Series Permanent Magnet Brushless Servo Motor (Platinum Heritage / Legacy Line)
Product Introduction:​ The PMA series is a legacy high-performance brushless servo motor family, predecessor to AKM; “240” denotes frame size (~240 mm diameter or relevant flange code), “1050” indicates peak torque ~1050 Nm or related torque class, “B-02” is winding/feedback/config variant.