Product Introduction: The AKD-B series is a standard-performance single-axis servo drive from Kollmorgen's AKD platform. It provides plug-and-play commissioning with Kollmorgen AKM servomotors and features Ethernet-based setup via Kollmorgen WorkBench software. The "B" denotes the base drive version without fieldbus; "N" = no options; "BE" typically indicates built-in EtherCAT option in some regional catalogs, but this unit is primarily analog/serial command capable.
Product Brief: Compact high-torque-density PMSM servo motor, frame 22 (70 × 70 mm IEC flange — NEMA 34 mini), E-winding = medium stack for AKM22 (continuous stall torque ~1.27 Nm). Factory-fitted with EnDat 2.1/2.2 absolute multiturn encoder ("EN" = EnDat in AKM2x code — "ENB2" = EnDat, B = keyed shaft, 2 = IP65 seals, DB0 = brake + connector config), keyed shaft, 24 VDC spring-applied holding brake ("DB" or "B" in brake position), rotatable M23 connectors (separate power+brake and feedback). Auto-recognizable by AKD/S700 drives via motor ID resistor network.
Product Brief: A DIN-rail mounted motor protection/monitoring module designed to work with Kollmorgen servo motors equipped with PTC or KTY thermal sensors, or as a standalone overload monitor for induction motors with thermal sensors. "SD" = Solid State / Monitoring type; "0.5" = settable current or sensor trip range reference (0.5 A base or PTC trip threshold reference); "230" = 230 VAC control supply; "D" = DIN rail housing with screw terminals. Provides relay contact output for machine shutdown on overtemperature or parameter violation. In many Kollmorgen legacy systems this was used alongside BDS4/SERVOSTAR to monitor PTC strings.
Product Brief: Digitally controlled 3-phase PWM servo amplifier for brushless PMSM, asynchronous AC, DC brush motors. S70102 = 120/230 VAC input, 1.5 Arms continuous / 4.5 Arms peak (S70102 = smallest S700 frame). "NANANAA" = N(Std I/O), A(No bus card — analog ±10 V, Step/Dir, Encoder Follow, Modbus TCP via Ethernet port), N(Multi-feedback card — resolver/encoder/EnDat/BiSS/Hiperface), A(Std I/O confirm), A(No STO/Std). Features onboard web server for commissioning, autotuning, and electronic gearing/camming (with option). Compatible with AKM1x–AKM3x small-to-mid motors.
Product Brief: The M205-C21-259 is a legacy configured part number for a Kollmorgen M200 Series direct-drive rotary table or frameless motor kit with a 205 mm outer diameter stator/rotor set, C21 = winding/stack option, 259 = special modification/feedback/bearing option. These are torque-motor-based rotary positioners providing zero-backlash direct coupling to the load. Modern equivalents are the Kollmorgen RBE / RMB / DD (Direct Drive Rotary) series.
Product Brief: Factory-molded shielded power cable with motor-side circular connector (Intercontec M23) and drive-side flying leads or terminal-block plug for Kollmorgen SERVOSTAR S300/S600/S700 or AKD drives. CB06261 typically denotes a motor power cable (with or without brake leads) for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class, 3 m length typical — "06261" encodes length and pinout). For AKM motors the equivalent modern part is CE-prefix (e.g., CE06261 = AKM power cable 3 m). CB06261 = legacy Goldline/early AKM power cable.
Product Brief: B-404S indicates frame 40, S = special stack variant; "-C-" = C-winding (higher torque constant than B-winding, lower max speed — typical continuous stall torque for B-404C ~5.5–6.5 Nm). "93" = keyed shaft + standard seals; "B3" = circular connector + shaft seal; "-072" = special lamination stack length 72 mm (non-standard — standard stacks are typically ~50/65/80 mm for B-40x; 072 is a custom length altering inertia and torque proportionally). Factory-fitted with 2-pole resolver. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for C-winding).
Product Brief: Factory-molded shielded cable with motor-side circular connector (Intercontec M23 or Hirschmann-style) and drive-side flying leads or mating connectors for Kollmorgen SERVOSTAR CD/S300/S600/S700 drives. CR06660 typically denotes a servo motor feedback cable (resolver or encoder) or combined power+feedback cable for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class). Exact function (POWER vs FEEDBACK) must be verified from the cable tag — CR-series cables are often feedback-only for Goldline; power cables of same era are CB-prefix.
Product Brief: High-torque-density 3-phase PMSM servo motor, frame 41 (100 × 100 mm IEC flange), H-winding = medium stack length for AKM41 (continuous stall torque ~4.8–5.5 Nm). Factory-fitted with EnDat 2.1/2.2 absolute multiturn encoder (option "92G"), keyed shaft ("N" = keyed in AKM code — confirmed by AN92GF0 where 'N' = keyed), 24 VDC spring-applied holding brake ("F" = brake present), and standard IP65 shaft seal + rotatable M23 feedback/power connectors. Auto-recognizable by AKD/S700 drives via motor ID resistor network.
