Digital guide
You are here:
Kollmorgen MTC306A1-E2C1
-
Product Name: SERVOSTAR 306 (MT306A1) Digital Servo Amplifier, 6 A Peak / 3 A Continuous Equivalent
-
Product Introduction: The SERVOSTAR 300 series (predecessor to AKD) is a digital brushless servo drive. MT306A1 is the 115/230 VAC input version. “E2C1” denotes firmware revision / interface option (typically RS-232/485 + ±10 V analog command, resolver or encoder feedback).
Detailed content
-
Specifications:
-
Input Voltage: 1 × 115/230 VAC or 3 × 208 VAC (model dependent)
-
Continuous Output Current: ~3 A RMS (drive class — actual depends on MT305/306 variant; MT306 typically 6 A peak / 3 A cont.)
-
Peak Output Current: ~9–12 A (short duration)
-
Feedback Supported: Resolver, Incremental Encoder, optional SFD/EnDat (with option card)
-
Command Interface: ±10 V analog torque/velocity, step/direction, electronic gearing
-
Setup: Via Kollmorgen ServoStar Setup Software (serial port)
-
Protection: Overcurrent, overvoltage, undervoltage, overtemperature, following error
-
Mounting: Panel mount, IP20
-
Dimensions: approx. 55 mm × 190 mm × 160 mm
-
-
Applications: Retrofit of older machines originally equipped with Goldline motors; general-purpose servo axes where modern fieldbus is not required.
-
Replacement Recommendation: AKD-x00306 or AKD-x00606 with appropriate feedback card.
