Shop

You are here:
  1. Home
  2. Shop
  3. Page 323

Woodward 5464-654

Product Name: MicroNet 64-Channel Discrete Output Module
Product Introduction: A high-density discrete output module designed for the Woodward MicroNet control system, providing reliable digital signal output for industrial control and turbine automation applications. It features plug-and-play operation with no calibration required, simplifying system integration and maintenance.
Technical Specifications:
  • Series: MicroNet
  • Channels: 64 discrete output channels

Woodward 08516-053

Product Name: TG Series Mechanical Turbine Governor
Product Introduction: A robust mechanical-hydraulic governor for precise speed control of small-to-medium industrial turbines, featuring droop control and self-contained lubrication.
Technical Specifications:
  • Speed Range: 1000–4000 RPM
  • Output Torque: 20 N·m (15 ft-lb)

Woodward 0088-01-000

Product Name: ProAct P-Series FL Actuator (Positioning Device)Woodward
Product Introduction: A high-torque electric actuator for fuel/air control in engines and turbines, accepting PWM, CAN, or analog position commands.
Technical Specifications:
  • Shaft Travel: 0° to 75°
  • Torque Output: Up to 10.4 N·m (92 lb-in) (Model IV)

Woodward SPM-D11

Product Name: Load Share Synchronizer (Microprocessor-Based)Woodward
Product Introduction: A multi-function synchronizer for single/three-phase generators, integrating synchronization, load sharing, power factor control, and generator protection.
Technical Specifications:
  • Power Supply: 12/24 VDC (9.5–32 VDC), max 10

Woodward SMM40

Product Name: Permanent Magnet Synchronizing/Speed Adjusting Motor
Product Introduction: A heavy-duty precision motor for remote speed adjustment of UG, PSG, and SG governors, enabling frequency matching and load distribution in generator systems.
Technical Specifications:
  • Power Supply: 24 VDC (0.15 A typical)

Woodward 9907-014

Product Name: 2301A Forward Acting Speed Control ModuleWoodward
Product Introduction: A full-authority speed controller for diesel/gas engines and turbines, accepting 4–20 mA or 1–5 VDC setpoint signalsWoodward.
Technical Specifications:
  • Power Supply: 20–40 VDC
  • Operating Temperature: -40°C to +85°C

Woodward 8406-113

Product Name: EGCP-3 Dual Display MC Control Operator Interface (Load Sharing Model)
Product Introduction: A microprocessor-based HMI for engine-generator control systems, enabling local/remote monitoring and load sharing coordination in multi-generator setups.
Technical Specifications:
  • Input Voltage: 18–32 VDC
  • Operating Temperature: -20°C to +70°C

Woodward 8404-029

Product Name: L-Series ITB (Integrated Throttle Body) Position ControllerWoodward
Product Introduction: A modular engine management component combining a die-cast aluminum throttle body with a fully programmable digital controller and bi-directional actuator for precise air/fuel controlWoodward.
Technical Specifications:
  • Actuation Type: Bi-directional servo

Woodward 8273-1011

Product Name: 2301E Digital Load Sharing & Speed ControllerWoodward
Product Introduction: A microprocessor-based controller for speed and load management of diesel/gas engine-driven generators, backward compatible with 2301D modelsWoodward.
Technical Specifications:
  • Power Supply: 18–36 VDC, max 600 mA
  • Operating Temperature: -40°C to +70°C

Woodward 8237-1247

Product Name: ProTech-GII Overspeed Protection Device (Bulkhead Mount)
Product Introduction: A triple-modular redundant safety controller for turbine overspeed and over-acceleration detection, ensuring safe shutdown of hydro, steam, and gas turbines.
Technical Specifications:
  • Nominal Input Voltage: 24 VDC
  • Operating Temperature: -20°C to +60°C

Woodward 8200-226

Product Name: Servo Position Controller (SPC Series)
Product Introduction: A high-precision servo valve driver designed for accurate positioning of proportional and integrating servo valves in industrial control systems. It replaces legacy models 8200-224 and 8200-225 with enhanced quality standards.
Technical Specifications:
  • Nominal Input Voltage: 24 VDC (18–32 VDC operating range)
  • Output Current Range: ±10 mA to ±250 mA

CONTROL TECHNIQUES 095E3D400BAFCA

Product Name: Unimotor fm Series Brushless AC Servo Motor (095E3D400BAFCA)
Product Introduction: A high-performance 95mm frame brushless AC servo motor from the Unimotor fm series, featuring a D4 winding and integrated brake. It is optimized for applications requiring high continuous torque, reliable holding, and precise motion control in industrial environments.
Technical Specifications:
  • Frame Size: 95mm
  • Voltage Rating: 460VAC
  • Nominal Speed: 3000 RPM