Technical Specifications:

• Total Net Capacity: 122 Liters
• Climate Class: SN-T (Sub-Normal to Tropical, operates from +10°C to +43°C ambient)
• Energy Efficiency Class: A+
• Noise Level: 38 dB(A) re 1 pW
• Voltage/Frequency: 220-240V / 50Hz
• Current Rating: 1.0A
• Power Consumption: 112 kWh/year
• Dimensions (H×W×D): 880mm × 540mm × 547mm
• Weight (Net): 32 kg
• Installation Type: Built-in (Flush-mounted)

Functional Features:

• No Frost Technology: Eliminates ice buildup inside the refrigerator compartment entirely.
• Electronic Temperature Control: Precise digital thermostat with LED display.
• Automatic Defrost: Fully automatic defrost cycle for the freezer compartment.
• Reversible Door Hinge: Door can be opened from left or right side for flexible installation.
• LED Interior Lighting: Energy-efficient internal illumination.
• Adjustable Glass Shelves: 3 removable tempered glass shelves with chrome trim.
• Door Storage Compartments: 3 door bins with transparent fronts.

Material Composition:

• Interior Liner: ABS Plastic (food-grade, white)
• Exterior Cabinet: Powder-coated steel (white finish)
• Shelves: Tempered safety glass with stainless steel trim
• Door Seal: Magnetic rubber gasket (replaceable)
• Evaporator: Aluminum roll-bond evaporator

Structural Features:

• Fully integrated design for flush cabinet mounting.
• Flat back panel for wall-flush installation.
• Adjustable feet for leveling on uneven surfaces.
• Ventilation required at top and bottom (minimum 10mm clearance top, 50mm rear).

Working Principle:
Uses a hermetically sealed compressor with R600a refrigerant (isobutane, eco-friendly, zero ODP, GWP=3). The No Frost system circulates cold air via a fan across the evaporator, preventing moisture from settling as frost. Electronic control board modulates compressor runtime based on internal temperature sensor feedback.

Key Advantages:

• Zero manual defrosting required
• A+ energy efficiency reduces electricity cost
• Ultra-quiet operation at 38 dB(A)
• Fully reversible door accommodates any kitchen layout
• R600a refrigerant — environmentally compliant

Applicable Industries/Use Cases:
Residential kitchens, apartment kitchens, studio apartments, hotel mini-bars, office break rooms.

Installation Requirements:

• Must be installed by a qualified technician.
• Electrical supply: dedicated 13A fused spur with earth.
• Minimum cabinet opening: 880mm (H) × 560mm (W) × 550mm (D).
• Leave 10mm gap at top and 50mm at rear for ventilation.
• Connect to cold water supply for automatic ice maker (if applicable variant).

Usage Precautions:

• Do not block air vents at top or rear of unit.
• Allow 24 hours before first use after installation for refrigerant stabilization.
• Clean interior with mild detergent only; do not use abrasive cleaners.
• Replace door gasket if damaged to maintain energy efficiency.