Shop

You are here:
  1. Home
  2. Shop
  3. Page 29

Kollmorgen 57M-4.000-M-AG-6R

Product Name:​ Kollmorgen 57M Series Hybrid Stepping Motor — 57 mm frame, 4.000″ stack length, AG winding, 6-lead or 8-lead configuration
Product Introduction:​
Industrial hybrid stepper (2-phase bipolar) from Kollmorgen's stepping motor line. "57M" = 57 mm square flange (NEMA 23 equivalent). "4.000" = 4.0 inch (101.6 mm) stack length indicating medium-high torque for its frame.

Kollmorgen S4036M-SE

Product Name:​ SERVOSTAR 403 S4036M-SE — Legacy Digital Brushless Servo Drive, 400V 3Ø, 6A
Product Introduction:​
Part of Kollmorgen's earlier SERVOSTAR 400 family (predecessor to AKD). Microprocessor-based digital amplifier for 3-phase 400 VAC brushless servo motors with resolver or encoder feedback. "SE" typically denotes specific firmware/interface option (Sercos or analog reference).

Kollmorgen XTL-230-18

Product Name:​ Kollmorgen External Braking Resistor (XTL Series), 230 V rating, 18 Ω
Product Introduction:​
An externally mounted aluminum-housed wirewound resistor used with AKD/SERVOSTAR drives to absorb regenerative energy from decelerating servo motors when the DC bus cannot return energy to the AC mains (especially with 240V single/three-phase input).

Kollmorgen B-102-A-34

Product Name:​ Goldline B-102-A-34 Brushless Servo Motor — Extended stack length variant of B-102 series
Description:​
Same family as B-102-A-22 but with longer magnetic stack (denoted by "34" — typically stack length 3 or 4 per Kollmorgen Goldline coding), yielding higher continuous torque.

Kollmorgen B-102-A-22-S-0

Product Name:​ Goldline B-102-A-22-S Brushless Servo Motor — 70 mm flange, resolver feedback, smooth shaft, no brake, stack length 2
Specifications (typical for B-102-A-xx):
  • Series: Goldline B, Frame Size 10 (Flange 70×70 mm)

Kollmorgen AKM62K-ACCNR-0

Product Name:​ AKM62K Servo Motor — Large frame (~115 mm flange), high inertia/torque winding K, resolver or encoder feedback, no brake
Typical AKM6x Series Parameters (Size 62K):
  • Flange: approx. 115×115 mm

Kollmorgen AKM41H-ANCNC-0

Product Name:​ AKM41H Servo Motor — Medium frame (~92 mm flange), high-torque winding H, digital encoder feedback, no brake
Typical AKM4x Series Parameters (Size 41H):
  • Flange: approx. 92×92 mm (IEC metric mounting)
  • Continuous Stall Torque: typically 2.7–3.3 N·m (varies by exact winding H)

Kollmorgen AKM11B-ANMN2-0

Product Introduction:​
Compact permanent-magnet synchronous servo motor from the AKM standard series, optimized for dynamic response and low cogging. Compatible with AKD family drives.

Kollmorgen AKD-P00307-NBEC-0000

Product Introduction:​
Standard AKD drive (non-PDMM) for single-axis servo control with EtherCAT communication. Designed for plug-and-play commissioning with AKM servo motors via Kollmorgen WorkBench software.

Kollmorgen AKD-M00607-MCEPDMM

Product Introduction:​
The AKD PDMM combines a high-performance AKD servo drive axis with an embedded multi-axis motion controller (Kollmorgen Automation Suite™). It eliminates the need for a separate PLC/motion controller in many applications and can act as an EtherCAT master for up to 7+ additional AKD axes.

Kollmorgen AKD-P1207-NAC

Product Description:
The AKD-P1207-NAC is a three-phase 480 V class AKD drive. "P" = Position indexer, "1207" = 12 A continuous / 30 A peak @ 187–528 VAC (240/480 VAC nominal 3Ø), "N" = standard I/O, "A" = CANopen (DS301+ DSP-402profile), "C" = standard options (no extra cards).

Kollmorgen S61001-EI

Product Description:
The S61001-EI belongs to the older but still supported S600 (Gold Line drive) family. Compact single-axis servo amplifier accepting ±10 V velocity/torque command from a motion controller or PLC. "EI" typically denotes enhanced I/O / specific firmware variant.