Shop

You are here:
  1. Home
  2. Shop
  3. Page 104

GE IS220PSVOH1B

Product Name:​ Mark VIe PSVO Dual Servo Control I/O Pack
Product Introduction:​ Smart I/O pack for GE Speedtronic Mark VIe; closes two independent servo loops for turbine fuel/steam valves and drives TSVO terminal board via WSVO driver.

GE AKR75C3F3207M

Product Name:​ AKR Series Industrial Aluminum Electrolytic Capacitor
Product Introduction:​ Radial-lead aluminum electrolytic capacitor built by GE for heavy-duty power electronics, UPS dc-links, VFD output stages, and industrial SMPS filtering.

GE DS3815PDNA

  • Product Name:​ Mark VIe Control Processor Module
  • Product Description:​ A high-performance central processing unit (CPU) designed for the GE Speedtronic Mark VIe Distributed Control System (DCS). It serves as the primary computational engine for complex turbine control logic and system management.

GE 125D5788G0001

  • Product Name: Signal Conditioning / I/O Board
  • Product Overview: A universal analog input board serving as the bridge between field sensors and the GE Mark V/VI​ controller processors.

GE 186C9303G0002

  • Product Name: Frequency Transducer / Converter
  • Product Overview: An electronic module that converts frequency input signals into proportional DC voltage outputs for metering and control.
  • Technical Specifications: Input frequency range 0.1 Hz to 20 MHz; output options 0–5 VDC or 0–10 VDC; accuracy ±0.1%.

GE 12CEYG51A3D

  • Product Name: Ground Distance Protection Relay
  • Product Overview: A specialized protective relay designed to detect ground faults on transmission lines by measuring positive sequence impedance.

GE IC2812B207AC21C

  • Product Name: DC Operated Auxiliary Relay
  • Product Overview: A general-purpose electromagnetic relay utilized within GE Mark V​ and LCI (Load Commutated Inverter)​ drive systems.
  • Technical Specifications: SPDT (1 Form C) contact configuration; rated for 20 Amps continuous current; coil voltage typically 125VDC.

GE 12SLV11A1A

  • Product Name: Solid-State Voltage Level Detector
  • Product Overview: A static (solid-state) relay used for precise voltage monitoring and control in industrial automation systems.
  • Technical Specifications: Three independently adjustable voltage levels (55V–180V); operates on 48VDC or 125VDC control power (selectable via jumpers).

GE IS200VTCCH1C

  • Product Name: Thermocouple Input Module
  • Product Overview: A high-density temperature sensing board for the GE Mark VI System, designed to interface directly with thermocouples.

GE THFP325

  • Product Name: THFP Series Fusible Switch
  • Product Overview: A heavy-duty, 3-pole fusible disconnect switch designed for commercial and industrial power distribution.
  • Technical Specifications: Rated at 400 Amps, 250 Volts AC; interrupting rating of 200kAIC; bolt-on installation type.
  • Product Name: THFP Series Fusible Switc
  • Product Overview: A heavy-duty, 3-pole fusible disconnect switch designed for commercial and industrial power distribution.
  • Technical Specifications: Rated at 400 Amps, 250 Volts AC; interrupting rating of 200kAIC; bolt-on installation typProduct Name: THFP Series Fusible Switch
  • Product Overview: A heavy-duty, 3-pole fusible disconnect switch designed for commercial and industrial power distribution.
  • Technical Specifications: Rated at 400 Amps, 250 Volts AC; interrupting rating of 200kAIC; bolt-on installation type.
  • Product Name: THFP Series Fusible Switc
  • Product Overview: A heavy-duty, 3-pole fusible disconnect switch designed for commercial and industrial power distribution.
  • Technical Specifications: Rated at 400 Amps, 250 Volts AC; interrupting rating of 200kAIC; bolt-on installation type.h
  • ​
  • _

GE IS420UCSBH4A

  • Product Name: UCSB Controller Module
  • Product Overview: The central processing unit for the GE Mark VIe Control System, featuring an embedded processor running the QNX real-time operating system.
  • Technical Specifications: 1066 MHz Intel EP80579 quad-core processor; 256 MB RAM; dual Ethernet ports supporting IEC 62439-3 HSR/PRP redundancy.

GE DS2020UCOCN1G1A

  • Product Name: Operator Control Module
  • Product Overview: A human-machine interface (HMI) component primarily used with GE EX2000 Excitation Systems​ and Mark V Controls.
  • Technical Specifications: Features a backlit LCD display, 32 programmable tactile keys, and serial communication ports; powered by +28 VDC.