Shop

You are here:
  1. Home
  2. Shop
  3. Page 89

GE 6KDV3148Q4F14D1

  • Product Introduction: Part of GE's DV-300 digital DC drive family, designed for industrial DC motor control applications using digital technology.
  • Ratings and Dimensions​ (based on GE DV-300 catalog for the 6KDV3148Q4F14 model):
    • Horsepower @ 460 VAC / 500 VDC: 75 HP

GE DS2020EXPSG3

  • Product Introduction: A special assembly exciter power supply module that provides regulated DC power to turbine excitation subsystems, ensuring stable magnetic field generation and precise synchronous control in EX2000 brushless generator excitation systems.
  • Technical Specifications:
    • Manufacturer: GE Fanuc / General Electric

GE 118D1516G0003

  • Product Introduction: Provides 16-channel 24 VDC digital input acquisition for receiving field discrete signals such as pushbuttons, limit switches, proximity sensors, and photoelectric switches.
  • Technical Specifications:
    • Input Points: 16 (8 groups, 2 points per group)

GE TJJ436350

  • Product Introduction: A thermal-magnetic molded case circuit breaker designed for three-phase high-power electrical systems, providing reliable protection against thermal overloads and short circuits.
  • Technical Specifications:
    • Poles: 3

GE 6KG1143250X9B1

  • Product Introduction: Provides industrial-grade Ethernet communication interface for GE Fanuc 90-30 PLC, enabling high-speed data exchange and remote monitoring between the PLC and host computers, HMI, SCADA systems, and other Ethernet devices.
  • Technical Specifications:
    • Communication Protocols: Modbus TCP/IP, Ethernet/IP

GE IS220PDIAH1B

Technical Specifications: 24 optically isolated discrete input channels for dry contacts / 24–32 VDC sourcing; 1500 V AC optical isolation (channel-to-channel and field-to-logic); fixed 4 ms hardware debounce filtering; dual 10/100 Mbps RJ-45 IONet Ethernet ports for redundant deterministic communication; 24–28.6 VDC power input, 6.0 W max consumption; –30…+65 °C operating, –40…+85 °C storage; Class I Div 2 Groups A–D, ATEX Zone 2 Group IIC hazardous location rating; DC-37 pin D-sub field connector; compatible terminal boards IS200TDBSH2A, IS200STCIH1A/2A/8A, IS200TBCIH2C; per-channel open-circuit detection; module status LEDs; ~0.8 kg.

GE IS200VTCCH2C

Technical Specifications: 24 differential thermocouple input channels; supports TC types E, J, S, K, T, B, R, N (8 types); voltage measurement span –20 mV to +95 mV; 16-bit resolution (0.1 °C measurement resolution); –200 °C to +1300 °C measurement range (depending on TC type); maximum cable resistance 450 Ω; up to 300 m connection distance to control cabinet; 24 VDC supply, typical 400 mA; VME bus, 1-slot occupancy; compatible terminal boards TBTC and DTTC; 260 × 35 × 200 mm, ~0.8 kg; –30…+65 °C operating; 50-pin female connector; conformal coating for moisture and vibration protection.

GE IS220PAOCH1A

Technical Specifications: 8 independent simplex 0–20 mA current output channels (software-selectable 4–20 mA); 16-bit Δ-Σ D/A converter per channel; ±0.5 % accuracy over full –30…+65 °C range; ≤900 Ω load drive capability; 18 V compliance voltage; 16-bit ADC with 50 Ω sense resistor for continuous current feedback; ≤1 ms output update cycle; 2500 Vrms channel-to-channel and channel-to-backplane isolation; dual 100 Mbps TSN Ethernet (IONet) via RJ-45; 27.4 VDC nominal supply (24 VDC industrial typical), 6–15 W depending on load; –30…+65 °C operating, –40…+85 °C storage; IP20 (front panel) / IP51 enclosure; 82.6 × 41.9 × 121 mm, ~0.5 kg; UL E207685, ATEX Zone 2, IECEx, SIL2.

GE IC3012N723HAA00AG00

Technical Specifications: 12 analog input channels organized as 4 groups × 3 channels; each group independently configurable for 0–10 VDC / 0–5 VDC / 4–20 mA / 0–20 mA; 16-bit A/D conversion (65,536 levels); 10 samples/second per channel (simultaneous sampling across all 12 channels); ≤100 µs conversion time per channel; ±0.2 % full-scale typical accuracy; linearity ±0.05 % FS; temperature drift ≤50 ppm/°C; 250 VDC inter-channel isolation; CMRR ≥100 dB at 60 Hz; input impedance 1 MΩ (voltage) / 250 Ω (current); ≤2 W power consumption; 0–60 °C operating, –40…+85 °C storage; MTBF ≥150,000 h.

GE IC693CPU372-CH

Single-slot Dual-Ethernet High-Performance CPU module for GE Series 90-30 PLC systems (revision CH). Same architectural platform as the AB revision with 240 KB total user memory.
  • Technical Specifications: AMD SC520 32-bit processor @ 133 MHz; 240 KB user memory (RAM + Flash); 0.15 ms/1K Boolean scan speed; 4096 discrete I/O points (2048 in / 2048 out); 32,640 words analog I/O capacity; two 10/100Base-TX RJ-45 ports with built-in switch function; one RS-232 and one shared RS-485 serial interface; 1.4 A @ 5 VDC; 0–60 °C operating; single-slot standard 90-30 rack.

GE IC693CPU372-AB

Single-slot Embedded Ethernet CPU module for GE Series 90-30 PLC systems (revision AB). It combines a 32-bit processor with a dual-port Ethernet switch for high-speed PLC-to-PLC communication.
  • Technical Specifications: AMD SC520 32-bit RISC processor @ 133 MHz; 120 KB configurable user memory (firmware 9.0+); 0.15 ms/1K Boolean scan speed; 4096 discrete I/O points (2048 in / 2048 out); up to 2048 analog inputs / 512 analog outputs (128–32,640 words configurable); two 10/100Base-T/TX auto-sensing RJ-45 ports with internal switch (shared IP, daisy-chain capable); 1.4 A @ 5 VDC (7.4 W); 0–60 °C operating; single-slot Series 90-30 rack format; built-in HTTP web server.

GE DS200GDPAG1A

Gate Driver Power Supply Board (GDPA) for GE Mark V Speedtronic and AC2000 / Innovation / EX2000 drive and excitation systems. It generates high-frequency power for SCR/IGBT gate drive circuits.
  • Technical Specifications: 600–700 W output power; AC input 80–132 V AC (28–66 Hz), DC input 105–140 V DC (dual-input capability); four 50 V AC (27 kHz) outputs via 1GDPL–4GDPL connectors; one 120 V DC output via CPTPL connector; ~27 kHz inverter frequency; integrated overcurrent, overvoltage, undervoltage, and P80 bus overvoltage protection; fully isolated inputs; 4 LEDs + 2 neon indicators; –20…+50 °C operating; ~0.9–1.0 kg.