Shop

You are here:
  1. Home
  2. Shop
  3. Page 742

Extreme Networks 71K11L4-24 (DCS Module)

Technical Specifications:

  • Processor: Intel Core 2 Duo L7400 1.5GHz (upgradable)
  • Memory: Up to 4GB ECC DDR2
  • Storage: 2GB NAND flash module (expandable)
  • Ports: 2 x Gigabit Ethernet, 2 x SATA, USB 2.0, COM serial
  • Operating Temperature: -40°C to +55°C (extended range option)

Extreme Networks ExtremeSwitching 5720-48MW

Technical Specifications:

  • Ports: 48 x multi-gigabit Ethernet (1/2.5/5/10G) with PoE++ (90W), 2 x Stacking/QSFP28 ports
  • PoE Support: Up to 90W per port (IEEE 802.3bt)
  • Stacking: High-speed 160Gbps stacking via QSFP28 ports
  • Form Factor: Rackmount (1U)
  • Management: ExtremeCloud IQ or Extreme Management Center (XMC)

Extreme Networks 5520-VIM (Virtual Interface Module)

Technical Specifications:

  • Slot Type: VIM slot compatible with ExtremeSwitching 5520 series
  • Interface Options: Supports various VIM modules (e.g., 10G SFP+, 1G SFP)
  • Hot-swappable: Can be replaced without disrupting network operations.

Extreme Networks ExtremeSwitching 5520-48W

Technical Specifications:

  • Ports: 48 x 1 Gigabit Ethernet (PoE+), 2 x Stacking/QSFP28 ports
  • PoE Support: Up to 30W per port (IEEE 802.3at)
  • Stacking: High-speed 160Gbps stacking via QSFP28 ports
  • Form Factor: Rackmount (1U)
  • Management: ExtremeCloud IQ or Extreme Management Center (XMC)
  • Operating Systems: ExtremeXOS or VOSS

Extreme Networks XGM3-2SF

  • Technical Specifications:
    • Port Configuration: Features a specific number of ports, typically a combination of different types such as 10 - gigabit and 40 - gigabit Ethernet ports, depending on the model. These ports support high - speed data transfer and can be used to connect various network devices.
    • Data Rate: Supports high - data - rate communication, with some ports capable of operating at 40 gigabits per second, enabling fast and efficient data transfer within the network.
    • Form Factor: Designed to fit into specific slots on Extreme Networks switches, ensuring compatibility and easy installation.

Extreme Networks DPS-1100GB-1B

  • Technical Specifications:
    • Power Output: Capable of providing a specific power output, typically measured in watts, to meet the power requirements of the connected network devices. The exact power output depends on the model and is designed to support a range of Extreme Networks products.
    • Input Voltage: Accepts a specific input voltage range, which can be either single - phase or three - phase depending on the model and the power requirements of the network environment.
    • Efficiency: Designed with high - efficiency power conversion technology to minimize power loss during the conversion from input to output power, reducing energy consumption and operating costs.

Extreme Networks 10GLRSFP10KMET

  • Technical Specifications:
    • Data Rate: Operates at a data rate of 10 gigabits per second, providing high - bandwidth connectivity for modern networks.
    • Fiber Type: Compatible with single - mode fiber (SMF), which allows for long - distance transmission with low signal attenuation.
    • Distance: Can transmit data over single - mode fiber up to a distance of 10 kilometers, depending on the network configuration and fiber quality.
    • Optical Wavelength: Uses an optical wavelength in the 1310 nm range, which is optimized for long - reach applications over single - mode fiber.

Extreme Networks 10GB-SR-SFP300

  • Technical Specifications:
    • Data Rate: Supports a data rate of 10 gigabits per second, enabling fast data transfer in local area networks.
    • Fiber Type: Compatible with multi - mode fiber (MMF), which is commonly used for short - distance optical communication due to its lower cost compared to single - mode fiber.
    • Distance: Can transmit data over multi - mode fiber up to a distance of 300 meters, depending on the fiber quality and network conditions.
    • Optical Wavelength: Uses an optical wavelength in the 850 nm range, which is well - suited for short - reach applications over multi - mode fiber.

Extreme Networks 10GBASE-X

  • Technical Specifications:
    • Data Rate: Operates at a consistent 10 - gigabit per second data rate, ensuring fast and efficient data transfer in the network.
    • Media Support: Can support different media types such as copper (using specific cable standards) and fiber (both single - mode and multi - mode depending on the model). For copper - based models, it may use advanced encoding techniques to achieve high - speed transmission over relatively long distances.
    • Connector Types: Depending on the media type, it may feature different connectors such as RJ45 for copper and LC or SC for fiber.

Extreme Networks SP7051-EXT SFP-10G-T

  • Technical Specifications:
    • Data Rate: Supports a data rate of 10 gigabits per second, enabling fast data transfer within the local area network (LAN).
    • Interface Type: Features a copper - based interface, typically using RJ45 connectors, which allows for easy connection to standard Ethernet cables.
    • Distance: Can support data transmission over copper cables up to a certain distance, usually up to 30 meters or more depending on the cable quality and network conditions.