Shop

You are here:
  1. Home
  2. Shop
  3. Page 658

Yokogawa EC402-E1 Bus Coupler Module

Technical Specifications:

  • Communication bus: It supports the FOUNDATION Fieldbus H1 bus, with a communication rate of 31.25kbps.
  • Number of connected modules: It can connect up to 32 fieldbus modules, meeting the expansion needs of general - sized control systems.
  • Working voltage: 24V DC, with a voltage stability range of ±15%.
  • Working temperature: -20℃ to 60℃, which can adapt to the industrial environment.
  • Power consumption: 100mA, with low power consumption and energy - saving performance.
  • Isolation performance: It has a 500V AC isolation between the bus and the power supply, ensuring the safety of data transmission.

Yokogawa ADV551-P10 Digital Output Module

Technical Specifications:

  • Number of channels: 32 channels, which can control 32 on - site actuators at the same time.
  • Output signal: 24V DC switch signal, with an output current of 0.5A per channel.
  • Isolation method: Channel - to - channel isolation, with an isolation voltage of 1500V AC, preventing signal interference between channels.
  • Response time: 1ms, which can quickly respond to control commands from the upper - level system.
  • Overload protection: Each channel has an overload protection function, which can automatically cut off the output when the output current exceeds the set value, protecting the module and the actuator.
  • Working temperature: -20℃ to 60℃, suitable for various industrial working environments.

Yokogawa AAI141-S00 Analog Input Module

Technical Specifications:

  • Number of channels: 16 non - isolated channels, suitable for scenarios where the signal sources are common - grounded.
  • Input signal: It supports 4-20mA current signal input and can also be configured to receive 0-10V voltage signal.
  • Accuracy: ±0.01%, ensuring the high accuracy of signal collection.
  • Resolution: 16 bits, which can capture subtle changes in analog signals.
  • Sampling cycle: 10ms, enabling rapid response to signal changes.
  • Input impedance: 250Ω for current signal input and ≥10MΩ for voltage signal input.
  • Working temperature: -10℃ to 55℃, which can adapt to the general industrial environment.

Yokogawa SDV521-S63 Digital Input Module

Technical Specifications:

  • Number of channels: 16 channels, which can collect 16 - way digital signals at the same time.
  • Input signal type: DC 24V switch signal, with a signal input range of 15-30V DC.
  • Response time: 1ms, which can quickly capture the change of the input signal.
  • Isolation voltage: 1500V AC, effectively preventing signal interference between channels and ensuring the stability of signal collection.
  • Power consumption: 50mA (5V DC), 150mA (24V DC), with low power consumption and energy - saving characteristics.
  • Connection method: It adopts a signal cable interface adapter without explosion - proof function, and complies with the ISA standard G3, with a working temperature of -20℃ to 70℃.

Yokogawa SCP461-11 High-precision Positioning Control Module

Technical Specifications:

  • Control accuracy: Up to ±0.001mm, which can meet the high - precision positioning requirements of most industrial equipment.
  • Positioning range: 0-10000mm, covering the positioning needs of general - sized industrial machinery.
  • Control cycle: 1ms, enabling rapid response to position changes of the controlled equipment.
  • Communication interface: It is equipped with Profinet and Modbus - RTU interfaces, which can seamlessly communicate with the upper - level control system.
  • Input voltage: 24V DC, with a voltage fluctuation range of ±10%.
  • Working temperature: -20℃ to 60℃, suitable for most industrial working environments.

AEG POS112-01

Technical Specifications:

  • Number of Channels: 2
  • Input Signal Types: Incremental encoder (A/B/Z), absolute encoder (SSI), linear sensor (4-20mA)
  • Position Resolution: 0.01mm (linear), 0.01° (rotary)
  • Maximum Input Frequency: 500kHz
  • Position Range: ±999999.99mm/°
  • Communication Interface: RS485 (Modbus RTU)
  • Working Voltage: 24V DC

AEG SC8128

Technical Specifications:

  • Safety Inputs: 16 (24V DC, dual-channel)
  • Safety Outputs: 8 (relay, 230V AC/5A)
  • Safety Communication: PROFIsafe
  • Response Time: ≤50ms
  • Working Voltage: 24V DC
  • Power Consumption: ≤6W
  • Operating Temperature: -20°C to +70°C
  • Protection Rating: IP20
  • Safety Functions: Emergency stop, safety door monitoring, two-hand control, light curtain monitoring

AEG 6054-042.20401

Technical Specifications:

  • Number of Output Channels: 8
  • Output Signal Types: 4-20mA DC, 0-10V DC (configurable per channel)
  • Resolution: 16 bits
  • Accuracy: ±0.1% of full scale
  • Output Update Rate: 5ms per channel
  • Isolation: 1000V AC channel-to-channel
  • Working Voltage: 24V DC
  • Power Consumption: ≤6W

AEG 140CRA21110

Technical Specifications:

  • Input Voltage: 115/230V AC (selectable), 50/60Hz
  • Input Voltage Range: 85-276V AC
  • Output Voltage: 5.1V DC (for logic), 24V DC (for I/O)
  • Output Current: 5.1V/10A, 24V/5A
  • Communication Protocol: Modbus Plus
  • Working Temperature: 0°C to +60°C

AEG MM-PMA2-300

Technical Specifications:

  • Analog Input Channels: 8 (4-20mA, 0-10V)
  • Analog Output Channels: 4 (4-20mA, 0-10V)
  • Digital I/O Channels: 8 inputs, 8 outputs (transistor)
  • Analog Resolution: 16 bits
  • Analog Accuracy: ±0.05% of full scale
  • Digital Input Voltage: 24V DC
  • Digital Output Voltage: 24V DC, 0.5A per channel

AEG 110CPU61203

Technical Specifications:

  • Processor: 32-bit RISC, 500MHz
  • Memory: 16MB RAM, 32MB Flash
  • Integrated I/O: 16 digital inputs, 16 digital outputs (relay)
  • Communication Interfaces: 1 RS232, 1 RS485, 1 Ethernet (TCP/IP)
  • Supported Protocols: Modbus RTU, Modbus TCP/IP
  • Programming Languages: LD, FBD, ST, IL
  • Working Voltage: 24V DC
  • Power Consumption: ≤10W

AEG 6054-042.204012.05

Technical Specifications:

  • Number of Output Channels: 16
  • Output Type: Relay (SPDT)
  • Rated Voltage: 230V AC, 24V DC
  • Rated Current: 5A per channel, 64A total
  • Response Time: ≤10ms
  • Isolation: 500V AC channel-to-channel and channel-to-ground
  • Working Voltage: 24V DC