Kollmorgen P70530-SDN
Product Name: Kollmorgen Power Cable Assembly Product Series: P70530 Series Motor Power Cable Model Number: P70530-SDN Cable Type: Servo Motor Power Cable (Dynamic Rated)
Shop
You are here:
Kollmorgen AKD-P02407-NCE
Product Name: Kollmorgen AKD Servo Drive Product Series: AKD (Advanced Kinetics Drive) Model Number: AKD-P02407-NCE Rated Continuous Power: 2.4 kW (P024 = 2.4 kW)
Kollmorgen NTTRB1-5301-13-A-03-1
Product Name: Kollmorgen NTTRB1 Series Frameless DC Torque Motor Product Series: NTTRB1 Frameless Torque Motor Product Type: Frameless Brushless DC Torque Motor Model Number: NTTRB1-5301-13-A-03-1
Kollmorgen S61401-PB
Model Code Breakdown:
- S6: S600 Series
- 14: Frame Size (14 = 80 mm Diameter Flange)
- 01: Stack Length Code (01 = Shortest Stack, Lowest Inertia in S600-14 Variant)
- PB: Configuration Code (PB = Specific Winding + Shaft + Encoder Combination)
Kollmorgen AKD-T02406-ICA
Model Code Breakdown:
- AKD: Drive Series
- T: Torque-Optimized Configuration (Enhanced Current Loop, Optimized for High-Torque Low-Speed Applications)
- 024: 24 VDC Nominal DC Bus Voltage
- 06: 6 A RMS Continuous Output Current
- ICA: Configuration Code (Network: EtherCAT, Command: Cyclic Synchronous Torque, Analog I/O: Standard)
Kollmorgen PRD-0016600D-15
Model Code Breakdown:
- PRD: Product Series — Multi-Turn Absolute Position Feedback Device
- 0016600: 16,600 Counts per Revolution (Effective Resolution)
- D: Multi-Turn Capability (D = Digital Multi-Turn, Up to 4096 Revolutions)
- 15: Configuration Code (Output Protocol / Electrical Interface)
Kollmorgen S74802-NANAPM
Model Code Breakdown:
- S7: S700 Series
- 48: Frame Size (48 = 115 mm Flange, S700 Medium Frame)
- 02: Stack Length Code (02 = Short Stack, Low Inertia)
- NA: No-Key Shaft (Smooth, Clamping Hub Mount)
- NA: No-Key Shaft (Confirmed — Double NA indicates smooth shaft both ends or specific shaft spec)
- PM: Permanent Magnet (Standard NdFeB, Not High-Temperature Variant)
Kollmorgen 63032-01C
Model Series: 63032 Series Absolute Encoder Model Code Breakdown:
- 63032: Series Designation
- 01: Variant Code (Electrical/Mechanical Configuration)
- C: Output Protocol — BiSS-C (Bidirectional Synchronous Serial)
Kollmorgen 63032-01C
Model Code Breakdown:
- AKD: Drive Series
- B: Base Configuration (Standard Feature Set)
- 024: 24 VDC Nominal DC Bus Voltage
- 07: 7 A RMS Continuous Output Current
- NCS: Configuration Code (Network: EtherCAT, Command: Cyclic Synchronous, Analog I/O: Standard with Safe Torque Off)
Kollmorgen AKD-B02407-NCS
Model Code Breakdown:
- AKD: Drive Series
- B: Base Configuration (Standard Feature Set)
- 024: 24 VDC Nominal DC Bus Voltage
- 07: 7 A RMS Continuous Output Current
- NCS: Configuration Code (Network: EtherCAT, Command: Cyclic Synchronous, Analog I/O: Standard with Safe Torque Off)
Kollmorgen 606-DD-99-TS-268
Model Code Breakdown:
- 606: Motor Frame Series
- DD: Double-Ended Shaft Configuration
- 99: Winding Code (Specific Kv/Torque Constant Variant)
- TS: Encoder Type — Single-Turn Absolute, 12-Bit (4096 Counts/Rev)
- 268: Shaft/Connector Configuration Code
Kollmorgen 204-C-31-B3
Model Series: 204 Series Frameless Torque Motor Model Code Breakdown:
- 204: Frame Size (2.04 inch / 51.8 mm Outer Diameter)
- C: Motor Stack Length Variant (Medium Torque Version)
- 31: Winding Configuration Code (Specific Kv/Torque Constant)
- B3: Mounting Flange Type (B3 = Square Flange with Tapped Holes)