Shop

You are here:
  1. Home
  2. Shop
  3. Page 662

AEG A18318

Technical Specifications:

  • Rated current range: 23 A - 32 A
  • Setting current: Adjustable from 23 A to 32 A
  • Trip class: Class 10 (trips within 10 seconds at 6 x rated current)
  • Phase loss protection: Built-in (trips within 2 seconds of phase failure)
  • Reset type: Manual and automatic reset options
  • Number of poles: 3 poles
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 50 mm x 100 mm x 80 mm
  • Weight: 0.4 kg

AEG A18370

Technical Specifications:

  • Rated operational voltage (Ue): 400 V AC, 50 Hz
  • Rated operational current (Ie): 95 A at 400 V AC (AC-3 duty)
  • Making capacity (Icm): 12 x Ie (1140 A) for 0.3 seconds
  • Breaking capacity (Ics): 10 x Ie (950 A) for 0.3 seconds
  • Coil voltage options: 24 V AC, 110 V AC, 220 V AC, 380 V AC
  • Number of poles: 3 NO (normally open)
  • Mechanical lifespan: 15 million operations
  • Electrical lifespan: 1 million operations at rated current
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 80 mm x 150 mm x 100 mm
  • Weight: 1.2 kg

AEG AS-5120-000

Technical Specifications:

  • Number of input channels: 16 isolated channels
  • Input signal type: 24 V DC (sink/source configurable)
  • Input current: 5 mA per channel
  • Response time: ≤1 ms
  • Isolation voltage: 500 V AC between channels and backplane
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)
  • Power consumption: 2.5 W
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
  • Weight: 0.2 kg

AEG POS011

Technical Specifications:

  • Number of position channels: 4 channels
  • Input signal types: Incremental encoder (A/B/Z phase), absolute encoder (SSI protocol)
  • Maximum input frequency: 500 kHz per channel
  • Position resolution: 32-bit counter (0 to 4294967295 counts)
  • Position update rate: 1 ms
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)
  • Power consumption: 4 W
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
  • Weight: 0.3 kg

AEG 140DDO35300

Technical Specifications:

  • Number of output channels: 32 channels (4 groups of 8 channels)
  • Output type: Solid-state MOSFET (no moving parts for extended lifespan)
  • Nominal output voltage: 24 V DC (18 V DC - 30 V DC operating range)
  • Continuous output current: 0.5 A per channel; 4 A per group
  • Peak output current: 1 A per channel (10 ms duration)
  • Isolation: 500 V AC between channels, groups, and backplane
  • Power dissipation: 1.75 W + (0.4 V × total load current)
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 100 mm x 134 mm x 64 mm
  • Weight: 1.12 kg

AEG 6051-042.167619

Technical Specifications:

  • Supported protocols: Modbus RTU, Modbus TCP, Ethernet/IP, Profinet
  • Communication ports: 1 x RS-485 (Modbus RTU), 1 x Ethernet (RJ45, 10/100 Mbps)
  • Data transmission rate: RS-485 up to 115.2 kbps; Ethernet up to 100 Mbps
  • Number of network nodes: Up to 32 nodes on RS-485; 256 nodes on Ethernet
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)
  • Power consumption: 4 W

AEG ALU286

Technical Specifications:

  • Processor core: 32-bit RISC architecture optimized for logic operations
  • Instruction set: Supports LD, FBD, IL, and ST programming languages
  • Data processing speed: 0.08 μs per logic operation
  • Data word length: 16-bit and 32-bit data handling
  • Memory interface: Direct access to PLC system RAM/Flash memory
  • Operating voltage: 5 V DC (supplied by the PLC backplane)
  • Power consumption: 2 W
  • Operating temperature range: 0°C to +60°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 25 mm x 80 mm x 100 mm
  • Weight: 0.15 kg

AEG AS-B875-001

Technical Specifications:

  • Number of input channels: 8 isolated channels
  • Input signal types: Configurable per channel for 4-20 mA DC, 0-10 V DC, -10 V to +10 V DC
  • Resolution: 16 bits
  • Accuracy: ±0.05% of full scale
  • Sampling rate: 10 ms per channel
  • Isolation voltage: 1000 V AC between channels and backplane
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)

AEG AM-S985-800

Technical Specifications:

  • Communication protocol: Modbus Plus
  • Communication port: 2 x Modbus Plus ports (for daisy - chain or redundant network configuration)
  • Transmission rate: 1 Mbps
  • Maximum number of nodes on the network: 64
  • Transmission distance: Up to 1000 m per segment (using twisted - pair cable)
  • Operating voltage: 24 V DC (supplied by the PLC system)
  • Power consumption: 3 W

AEG BKF101

Technical Specifications:

  • Rated voltage: 400 V AC
  • Rated current: 10 A
  • Breaking capacity: 6 kA at 400 V AC
  • Number of poles: 3 poles
  • Trip curve: C curve (trips at 5 - 10 x rated current)
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 27 mm x 89 mm x 69 mm
  • Weight: 0.15 kg

AEG 6065-042.703580

  • Technical Specifications:
    • Memory type: Flash memory
    • Memory capacity: 16 MB
    • Data retention: 10 years without power
    • Operating voltage: 3.3 V DC (supplied by the PLC system)
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 20 mm x 50 mm x 80 mm
    • Weight: 0.1 kg

AEG PC-A984-120

Technical Specifications:

  • Processor type: 16 - bit microprocessor
  • Instruction execution speed: 1.5 ms per 1000 instructions
  • User program memory: 1.5 KB EEPROM (expandable up to 8 KB)
  • Data memory: 1 KB RAM
  • Number of I/O points: Up to 512 digital I/O points (expandable via I/O racks)
  • Communication ports: 1 x RS - 232 (for programming)
  • Programming language: Ladder Diagram (LD), Instruction List (IL)