Shop

You are here:
  1. Home
  2. Shop
  3. Page 233

Kollmorgen AKM32D-ANCNDB0

Product Description:
Legacy AKM series brushless servo motor, Frame 3 (72 mm flange), medium stack length (option "2"). Winding code D indicates a specific voltage/speed winding for 320–480 VDC bus. Feedback "NC" = resolver or SFD depending on generation; "DB0" indicates no brake, standard smooth/keyed shaft, standard seals.

Kollmorgen AKM2G-23D-ACD2

Product Introduction:
The AKM2G-23D-ACD2 is part of Kollmorgen's second-generation AKM2G high-performance brushless servo motor family. It delivers higher torque density, lower cogging, and improved thermal performance compared to legacy AKM motors. Frame 23 = 58 mm square flange.

Kollmorgen CR03261

Product Description:
The CR03261 is a Kollmorgen standard cable/accessory part number from the CR series of pre-assembled motor and drive interconnect cables. It is typically used to connect Kollmorgen AKM/MSK servo motors to AKD/S700 series drives for power, feedback, or brake circuits. Exact pinout depends on motor family (Intercontec circular connector standard).

Kollmorgen AKM74L-ACCNR-0

Product Name:​ AKM74 Synchronous Servo Motor, Flange 74 mm (≈NEMA 34), Long Stack (L), No Brake, Circular Connector, Resolver Feedback (CNR = resolver, smooth shaft), Standard Seal Code (0)
Typical Specifications (AKM74L — no brake):
  • Flange Size:​ 74 × 74 mm

Kollmorgen 503-26606-00

Product Name:​ Kollmorgen Accessory / Option Module or Cable — typically an AKD I/O Expansion Board, Feedback Option Card, or Mounting Bracket​ (part #503-26606-00)
Overview:
Prefix "503-" in Kollmorgen numbering usually denotes a spare or accessory — e.g.:

Kollmorgen AKM44E-BKCNR-0

Product Name:​ AKM44 Synchronous Servo Motor, Flange 44 mm (NEMA 17 equivalent), Medium (E) Windings/Length, with Holding Brake, Circular Connector, Standard Resolver or Encoder (per "CNR" = resolver feedback, smooth shaft, connector orientation), No seal (0 = standard)

Kollmorgen AKD-T00606-ICA

Product Overview:
The AKD-T00606-ICA is part of the AKD family — the industry-standard Ethernet-based digital servo drive. "T" = standard AKD (not PDMM), "00606" = 6A continuous @ 120/240V, "ICA" = options: I = no brake chopper relay output, CA = specific I/O/feedback config (often includes 1× ±10V analog cmd, EnDat/BiSS/SFD capable, 8 DI / 3 DO, STO).

Kollmorgen CB06260

Product Overview:
"CB" prefix cables are standardized pre-molded motor cables for AKM family servomotors. They provide shielded power conductors and feedback/encoder leads in one jacket (single-cable capable with SFD) or as matched pair. "06260" typically encodes length (6 m) and connector type (circular metric M23/M8/M12 per motor side, drive-side D-sub or spring terminal).

Kollmorgen B-404-A-23

Product Overview:
The B-Series Goldline motors were Kollmorgen's premium pre-AKM brushless servos. "B-404" refers to a medium-power frame (roughly NEMA 42 / 104 mm). "-A" = winding code (voltage/speed/torque constant). "-23" = feedback/resolver option or custom mod. These are often found as housed motors or frameless stator/rotor kits.

Kollmorgen VSA08-2012

Product Overview:
V-SA couplings are zero-backlash, stainless-steldisc-pack flexible couplings designed to connect servo motor shafts to load (ball screw, timing pulley, etc.) while accommodating angular, parallel, and axial misalignment.

Kollmorgen PM-AKM2G-72L-ASD2

Product Overview:
The AKM2G family is Kollmorgen's next-generation rotary servo motor offering higher torque density, lower cogging, and improved thermal performance vs. legacy AKM. The "72L" denotes a 72 mm flange with long-stack (higher continuous torque). "ASD2" typically denotes Smart Feedback Device (SFD3 or compatible high-res encoder) and standard connector orientation.

Kollmorgen S20360-CNS

Product Overview:
The S300 is a compact digital brushless servo amplifier for permanent magnet synchronous (PMSM) and induction motors. The "-CNS" suffix indicates the base unit with CANopen fieldbus interface and 120/240VAC supply capability.