Shop

You are here:
  1. Home
  2. Shop
  3. Page 723

Moog J077K651 Industrial Component

roduct Introduction: At present, there is limited public information about this product. It is inferred to be an industrial component of Moog, which may be a part of the motion control system. Moogs industrial components are known for their high quality and reliability, and this product may play a specific role in the system, such as signal transmission, power conversion, or mechanical connection.

Moog D662-1703E/D6621703E Series Pilot-Operated Proportional Valve

  • Product Introduction: This product belongs to Moogs D660 series of pilot-operated proportional valves for analog signals. It is an important component in electro-hydraulic control systems. It can convert small-power electrical signals into large-power hydraulic energy output, realizing the control of the displacement, speed, acceleration, and force of the actuator. The optimized valve body design makes it suitable for high-rated flow applications and can be used as a 2-stage or 3-stage valve according to the required dynamic performance.

Moog 164-009E-10-B2-2/164009E10B22 Industrial Spare Part

  • Product Introduction: This product is an industrial spare part of Moog. Moog is a globally leading supplier of high-performance motion control products and solutions. Its spare parts are designed to match the original equipment, ensuring the normal operation and performance recovery of the equipment. This spare part may be used in various industrial motion control systems to replace damaged or worn components, maintaining the stability and reliability of the entire system.

Moog D651-439 Proportional Control Valve

  • Product Introduction: It is a proportional control valve under Moog. It is an electrically actuated valve that can control the flow, pressure, or direction of hydraulic oil in proportion according to the input electrical signal. The product has a compact structure and convenient installation, and can be widely used in various hydraulic control systems.
  • Technical Specifications: The supply pressure at port P is 140 bar. The signal is 4-20 ma. The voltage supply is ±15 v. The operating temperature is -2 to +80°C. The hydraulic connection is sub plate. The electrical connection is a 5-pin plug on one side and a 6-pin plug on the other side. The weight is about 6.06-6.08 kg.

Moog D661-4652 Servo Control Hydraulic Valve

  • Product Introduction: It is a servo control hydraulic valve under Moog's D661 series, which is commonly used in steel mills. The product is original and has reliable quality. It can convert electrical signals into hydraulic signals to control the flow and pressure of hydraulic oil, thereby regulating the movement of hydraulic actuators.
  • Technical Specifications: It is a four-way, 2x2 way external connection, and five-way valve. The weight is 5.6kg. The maximum working pressure is 35.0MPa. The flow range is 30-1500 l/min under a pressure drop of 1.0MPa. The resolution is less than 0.2%. The hysteresis is less than 1.0%.

Moog D633-7333Direct-Acting Servo Valve

  • Product Introduction: It is a member of Moog's D633 series. It is a throttle-type flow control valve with closed-loop position control of the spool with live feedback. The valve core is driven by a permanent magnet linear force motor, which can flexibly drive the valve core to move in two directions from the spring-centered position. The valve integrates a closed-loop valve position control circuit board and a pulse width modulation (PWM) drive circuit, representing a significant development characterized by SMD technology.

Moog D633-7333Direct-Acting Servo Valve

  • Product Introduction: It is a member of Moog's D633 series. It is a throttle-type flow control valve with closed-loop position control of the spool with live feedback. The valve core is driven by a permanent magnet linear force motor, which can flexibly drive the valve core to move in two directions from the spring-centered position. The valve integrates a closed-loop valve position control circuit board and a pulse width modulation (PWM) drive circuit, representing a significant development characterized by SMD technology.

Moog D661-4013Servo Proportional Valve

  • Product Introduction: It belongs to the D661 series of Moog. It is an electro-hydraulic conversion and power amplification component. It can convert small-power electrical signals into large-power hydraulic energy output, and is widely used in various electro-hydraulic control systems. The valve adopts advanced design and manufacturing processes, ensuring high performance and reliability.
  • Technical Specifications: The flow range is 30-1500 l/min under a pressure drop of 1.0MPa. The maximum working pressure is 35.0MPa. The resolution is less than 0.2%. The hysteresis is less than 1.0%. The response time is 10-42ms. The weight is 5.6kg. The installation form complies with the ISO standard, with an additional T port of ISO 4401-05-05-0-05 type.

Moog 62F102 Hydraulic Valve

Technical Specifications:

  • Flow Capacity: Medium to high flow rates for efficient fluid transfer.
  • Pressure Rating: Suitable for high-pressure hydraulic systems up to 35 MPa.
  • Construction: Durable materials ensure long-term reliability and resistance to wear and corrosion.

Moog D633-7356 Electro-Hydraulic Servo Valve

Technical Specifications:

  • Rated Flow: 30 to 60 gpm (@1000 psi press drop) for efficient fluid transfer.
  • Pressure Rating: Suitable for high-pressure hydraulic systems up to 35 MPa.
  • Response Time: Fast response time of 14 ms (standard) / 8 ms (high sensitivity) for rapid system adjustments.

Moog R16KZ1X1nSM2 Hydraulic Component

Technical Specifications:

  • Flow Capacity: Medium to high flow rates for efficient fluid transfer.
  • Pressure Rating: Suitable for high-pressure hydraulic systems up to 35 MPa.
  • Construction: Durable materials ensure long-term reliability and resistance to wear and corrosion.

Moog DBMP04A2002E0B Servo Drive

Technical Specifications:

  • Input Voltage: Compatible with standard power supply voltages.
  • Output Current: Suitable for driving various servo motors with high precision.
  • Control Interface: Supports standard control signals for easy integration into existing systems.