Shop

You are here:
  1. Home
  2. Shop
  3. Page 3096

GE fanuc A20B-3300-028004B

Technical Specifications :
Model Number: A20B-3300-028004B
Manufacturer: GE Fanuc
Type: CNC Board / Servo Controller / Power Circuit Board
Dimensions (approx.): Length: 560mm
Compatibility: Designed for use with GE Fanuc CNC systems

GE fanuc A20B-2101-0390

Overview:
The GE Fanuc A20B-2101-0390 is a serial communication module and controller module designed for industrial control systems. It is a crucial component in the Alpha I series of spindle amplifiers and power boards manufactured by Fanuc.

GE 20836416

Technical Specifications:
Category: Programmable Control Framework Module
Compatibility: Part of PLC (Programmable Logic Controller) or similar control systems
Programming Capability: Configurable and programmable via software such as ABB's Automation Builder or Siemens' TIA Portal
I/O Interfaces: Typically includes digital inputs (DI), digital outputs (DO), analog inputs (AI), and analog outputs (AO)
Communication Interfaces: Equipped with communication interfaces like Ethernet, RS-485, Profibus, etc.

GE 8913-PS-AC

Technical Specifications:
Brand: GE (General Electric)
Model: 8913-PS-AC
Type: Power Supply Module
Input Voltage Range: Typically DC 9-36V (Redundant dual power input)
Typical Input Voltage: DC 24V
Power Consumption: Less than 4W
Voltage Isolation: DC1500V

GE 8851-LC-MT

The GE 8851-LC-MT is a powerful industrial automation control module designed specifically for various industrial applications. It combines high-speed data transmission, multi-channel input/output (I/O), programmable functionality, and exceptional reliability and stability.

GE 8810-HI-TX

Technical Specifications:
Brand: GE
Part Number: 8810-HI-TX
Input Channels: 8 single-ended 4-20mA input channels
Certification: Certified for SIL 2 safety applications
Field Circuit Compatibility: Non-energized, suitable for 2-wire, 3-wire, or 4-wire transmitters
HART Capability: HART pass-through, acquisition, and status reporting

GE 8750-CA-NS

Technical Specifications
Brand: GE (General Electric)
Model: 8750-CA-NS
Type: Controller Carrier (DCS/PLC System Component)
Size (Dimensions): 25*32*13 mm (approximate, based on information)
Operating Temperature: 0°C to 85°C
Bus Voltage/Current: 1.4 Amperes
Speed: 100 MHz
Connector Quantity: 2
Weight: 0.2 kg

GE 8521-HC-MT

Technical Specifications
Model: 8521-HC-MT
Brand: GE
Type: Digital Expansion Module / Hybrid Controller
Voltage: Typically 80V
Output Frequency: 58kHz
Operating Temperature: -20°C to 100°C
Current: 5A
Resistance: 5 Ohms
Size: 302022 mm

GE 8521-EB-MT

Technical Specifications
Type: Network Adapter / Interface Module
Brand: GE (General Electric)
Model: 8521-EB-MT
Interface: Likely to have multiple interfaces for connectivity
Input Voltage: Potentially 24 Vdc
Channels: 40-channel analog input module

GE 8502-BI-DP

Technical Specifications
Model: 8502-BI-DP
Manufacturer: GE Automation
Supported Bus Protocol: PROFIBUS DP
Data Transmission Rate: Up to 6 Mbps
Node Address Range: 0 to 255
Supported I/O Modules: Up to 24
Operating Temperature: 0°C to +60°C
Protection Rating: IP65
Dimensions: 85 mm x 45 mm x 23 mm
Weight: 50 g

GE 04220FL11232A

Technical Specifications
Input Voltage Range: 12-48VDC
Output Voltage: 5VDC
Output Current: Up to 10A
Efficiency: Greater than 90%
Dimensions: 170mm x 105mm x 32mm
Weight: Approximately 120g
Operating Temperature: -20°C to +50°C
Storage Temperature: -40°C to +70°C
Humidity: 5% to 95% RH (non-condensing)
CPU: 32-bit RISC processor
Functional Features

GE 750-P5-G5-D5-HI-A20-R

Technical Specifications:
Model: 750-P5-G5-D5-HI-A20-R
Power Rating:
Typically associated with high-performance gas turbines designed for power generation applications, with power outputs in the range of 185 megawatts and thermal efficiencies up to 39%.