Shop

You are here:
  1. Home
  2. Shop
  3. Page 690

Bently 330901-00-70-10-02-CN

Product Introduction: China-market probe certified to NEPSI Ex ia IIC T4 Ga for immediate acceptance in Chinese hazardous-area plants.
Technical Specifications:
  • Total Length: 0.7 m
  • Thread: 3/8-24 UNF-2A
  • Linear Range: 2 mm
  • Sensitivity: 7.87 V/mm
  • Approvals: NEPSI Ex

Bently 330877-080-37-00

Product Introduction: 8 m extension combining armor and FluidLoc technologies for maximum mechanical and chemical protection in a single part number.
Technical Specifications:
  • Length: 8.0 m
  • Armor: Stainless-steel interlocked
  • Seal: FluidLoc barrier
  • Impedance: 75 Ω
  • Temperature: –54 °C to +200 °C
  • Certifications: None (general-purpose)

Bently 330876-03-90-00-05

Product Introduction: Short-reach reverse-mount probe with 90° miniature coax connector for installations where axial space is limited and cabling must be routed at 90° to the probe axis.
Technical Specifications:
  • Mounting Style: Reverse-mount, 3/8-24 UNF-2A
  • Case Length: 30 mm
  • Total Length: 0.3 m
  • Connector: 90° ClickLoc miniature coax
  • Linear Range: 2 mm
  • Sensitivity: 7.87 V/mm
  • Approvals: ATEX, IECEx, CSA

Bently 330854-040-24-05

Product Introduction: Heavy-duty extension cable for the 3300 XL 25 mm eddy-current transducer system. It delivers 75 Ω impedance-matched signalling between probe and Proximitor while carrying global Ex certifications for hazardous-area differential-expansion (DE) measurements on large steam turbines.
Technical Specifications:
  • Length: 4.0 m
  • Impedance: 75 Ω ±2 %
  • Armor: Stainless-steel interlocked, 6 mm OD
  • Crush Resistance: 4,500 N
  • Bend Radius: 75 mm static / 150 mm dynamic

Bently 330854-040-24-00

Product Introduction: 4 m extension combining armor and FluidLoc technologies for maximum mechanical and chemical protection.
Technical Specifications:
  • Length: 4.0 m
  • Armor: Stainless-steel interlocked
  • Seal: FluidLoc barrier
  • Impedance: 75 Ω
  • Certifications: None

Bently 330851-02-000-070-10-00-05

Product Introduction: Longer 0.7 m reverse-mount probe for deeper hollow-shaft installations.
Technical Specifications:
  • Total Length: 0.7 m
  • Case Length: 70 mm
  • Linear Range: 4 mm
  • Approvals: ATEX, IECEx, CSA

Bently 330851-02-000-030-10-00-05

Product Introduction: Reverse-mount 11 mm probe for hollow-shaft applications where cabling must be kept away from rotating parts.
Technical Specifications:
  • Mounting Style: Reverse-mount, M14 × 1.5
  • Case Length: 30 mm
  • Total Length: 0.3 m
  • Linear Range: 4 mm
  • Sensitivity: 3.94 V/mm
  • Approvals: ATEX, IECEx, CSA

Bently 330850-90-05

Product Introduction: 9 m system version of the 50 mm probe with worldwide Ex certification for hazardous areas.
Technical Specifications:
  • Total Length: 9.0 m
  • Linear Range: 15 mm
  • Approvals: ATEX, IECEx, CSA

Bently 330850-50-00

Product Introduction: Ultra-large diameter probe for very long linear range (15 mm) required on large fluid-film bearings or where large mechanical clearances exist.
Technical Specifications:
  • Probe Diameter: 50 mm
  • Thread: M64 × 2
  • Total Length: 5.0 m
  • Linear Range: 15 mm
  • Sensitivity: 0.787 V/mm (20 mV/mil)

Bently 330780-91-05

Product Introduction: DIN-rail version of the 9 m agency-approved Proximitor for high-density cabinets.
Technical Specifications:
  • System Length: 9.0 m
  • Mounting: DIN-rail (TS-35) or panel
  • Approvals: ATEX, IECEx, CSA
  • Supply: –24 VDC
  • Output: 3.94 V/mm

Bently 330780-90-05

Product Introduction: Agency-approved version of 330780-90-00 for worldwide hazardous-area installations.
Technical Specifications:
  • System Length: 9.0 m
  • Approvals: ATEX Ex ia IIC T4 Ga, IECEx, CSA Class I Div 2
  • Mounting: Panel
  • Supply: –24 VDC
  • Output: 3.94 V/mm

Bently 330780-90-00

Product Introduction: The 11 mm Proximitor driver converts the high-frequency eddy-current signal from the probe into a calibrated DC voltage proportional to gap. The 9 m system length suits large machines or remote instrument rooms.
Technical Specifications:
  • System Length: 9.0 m (probe + extension)
  • Supply Voltage: –24 VDC ±1 V, 12 mA typical
  • Output: –2 to –18 VDC linear over 4 mm range
  • Sensitivity: 3.94 V/mm (100 mV/mil)
  • Linearity: ±0.5 % full scale
  • Frequency Response: 0 – 8 kHz