Shop

You are here:
  1. Home
  2. Shop
  3. Page 206

Kollmorgen S61400-550O

Product Series:​ Kollmorgen SERVOSTAR S600​ Family (Predecessor to AKD)
Product Brief:​ Digitally controlled 3-phase PWM servo amplifier for brushless PMSM, asynchronous AC, DC brush motors. S61400 = 14 Arms continuous / 28 A peak, 240–480 VAC 3Φ input. "-550O" is a custom factory-suffix denoting a specific OEM configuration, which may include non-standard I/O mapping, custom firmware, or a special connector arrangement. The base S614 unit supports resolver, incremental encoder, SinCos, EnDat, and BiSS feedback. Compatible with AKM series motors — auto motor ID from AKM connector.

Kollmorgen S403BA-PB

Product Series:​ Kollmorgen SERVOSTAR S400​ Family (Compact, Cost-Effective Digital Servo Amplifiers)
Product Brief:​ Single-axis digitally controlled 3-phase PWM servo amplifier for brushless PMSM and DC brush motors. S403 = 3 Arms continuous / 6 A peak, 200–230 VAC 3Φ input. "BA" = multi-feedback interface + built-in brake control output; "PB" = Premium feedback card fitted (resolver, incremental encoder, SinCos 1 Vpp, EnDat 2.1/2.2, Hiperface/Hiperface DSL). Standard I/O includes ±10 V analog command and Step/Dir inputs. Compatible with AKM2x–AKM5x motors.

Kollmorgen D101A-93-1215-001

Product Brief:​ The part number D101A-93-1215-001 denotes a custom-engineered linear actuator, voice coil motor (VCM), or solenoid sub-assembly originally designed for a specific OEM machine builder or specialized industrial application. These components are typically short-stroke, high-acceleration devices used for precise positioning or rapid engagement tasks. As a legacy custom part, detailed public specifications are not available, and it is often superseded by newer Kollmorgen linear motor platforms or requires direct OEM consultation for replacement.

Kollmorgen B-206-B-32-B3

Product Series:​ Kollmorgen Goldline B Series​ (Low-Inertia, 230 VAC Line Voltage)
Product Brief:​ 3-phase interior permanent magnet (IPM/NdFeB) synchronous servo motor offering high torque density and low cogging for dynamic point-to-point motion. Frame "20" = B-20x — flange 88.9 mm × 88.9 mm (NEMA 34), pilot Ø 63.5 mm, 4× M6 on 101.6 mm BCD. "B" winding = lower torque constant / higher speed capability vs C/D windings. Factory-fitted with 2-pole resolver (standard on Goldline B). "32" in option string = keyed shaft + standard seals; "B3" = mating circular connector + special oil seal. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models).

Kollmorgen AKD-P02407-NBE

Product Name:​ AKD Series Digital Servo Drive — 240/480 VAC 3Φ Input, 24 A Continuous, Ethernet/IP Fieldbus, Standard I/O, No STO (NBE = N=Std I/O, B=No addl card(EtherNet/IP fitted as base in some NBE decode — actually NBE: N=Std I/O, B=fieldbus type=EtherNet/IP, E=No STO/Std); more precisely AKD-P02407-NBE = P-version 240/480 VAC, 24 A cont, EtherNet/IP interface (built-in on NBE variants — "B" in NBE indicates bus type = EtherNet/IP, "E" = no STO))

Kollmorgen S403M-PB

Product Brief:​ Single-axis digitally controlled 3-phase PWM servo amplifier for brushless PMSM and DC brush motors. S403M = 3 Arms continuous / 6 A peak, 200–230 VAC 3Φ (some S400 accept 200–480 VAC — S403M is 230 V class). "-PB" = Multi-feedback interface card fitted (resolver, incremental encoder, SinCos 1 Vpp, EnDat 2.1/2.2, Hiperface/Hiperface DSL — "PB" denotes Premium feedback option in S400 coding); Standard I/O (analog ±10 V, Step/Dir, 6 DI / 3 DO / 1 relay); no fieldbus card fitted (optional cards: CANopen, Profibus, Sercos II, DeviceNet). Compatible with AKM2x–AKM5x motors.

Kollmorgen B-104-A-34-B3

Product Brief:​ 3-phase interior permanent magnet (IPM/NdFeB) synchronous servo motor offering high torque density and low cogging for dynamic point-to-point motion. Frame "10" = B-10x — flange 63.5 mm × 63.5 mm (NEMA 23), pilot ≈ 47.6 mm, 4× M5 on 70 mm BCD. "A" = winding code (lowest torque constant / highest speed in B-10 family). Factory-fitted with 2-pole resolver (standard on Goldline B). "34" in option string = smooth or keyed shaft + standard seals; "B3" = connector type/orientation + special oil seal (B3 typically = MS/circular connector, shaft seal, keyed shaft — verify from nameplate). Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models).

Kollmorgen CB10550

Product Brief:​ Factory-molded shielded cable with motor-side circular connector (Intercontec M23 or Hirschmann-style) and drive-side flying leads or mating connectors for Kollmorgen SERVOSTAR CD/S300/S600/S700 drives. CB10550 typically denotes a ServoStar CD/S300/S600 compatible motor power cable (and/or feedback — verify from cable tag: POWER vs FEEDBACK)​ for mid-current AKM/Goldline B/M-series motors (≈ 6–12 A rating). Some CB10550 references indicate the SERVOSTAR CD10550 drive​ — if the received item is a drive (heat sink + terminals + connectors) treat as SERVOSTAR CD10550 (230 VAC, 5 A cont); if a flexible cable with connectors, use the cable specs below.

Kollmorgen AKD-P01207-NB

Product Series:​ Kollmorgen AKD™​ Family — 240/480 VAC 3-Phase Variant ("-xzzz07")
Product Brief:​ High-performance single-axis servo amplifier for PMSM, asynchronous AC, linear, and DC brush motors. "P01207" = P-version (187–528 VAC 3Φ input), 12 Arms continuous / 30 A peak. "N" = no extra option card fitted (fieldbus slot empty). "B" = No built-in fieldbus interface card — analog ±10 V, Step/Dir, Encoder Follower, and Modbus TCP via Ethernet port are standard. Final "—" (no trailing letters) = Standard I/O, no STO. Fully auto-recognizes AKM/AKM2G motors via M23 connector ID resistors.

Kollmorgen SEB-204-B-91-0

Product Brief:​ Fail-safe (spring-applied, electrically released) friction disk brake designed to mount integrally on the non-drive end of a Kollmorgen Goldline B-204/B-206 (frame 20) servo motor. Engages automatically when 24 VDC brake supply is removed (power-off = brake ON). Holds load during dwell, emergency stop, or power loss. "SEB-204" = brake sized for B-20x motor frame; "-B-91-0" = 24 VDC coil, specific friction lining/thickness code, no extra options.

Kollmorgen 7201-STEP

Product Brief:​ The 7201-STEP is an interface/indexer plug-in board or configured base unit for the DigiFAS 7000 amplifier chassis, providing step-and-direction input acceptance and local indexer (motion program) capability for stepper or brushless motor control. DigiFAS 7000 main power stage accepts 3× 80–480 VAC and drives stepper or BLDC motors; 7201-STEP handles command interpretation — accepts step pulses (up to several MHz) and direction signals, and can execute stored motion profiles (indexing, homing, cam tables) from onboard memory.

Kollmorgen S30361-NA-ARM9

Product Brief:​ Digitally controlled 3-phase PWM servo amplifier providing torque, velocity, and position control loops. S30361 = 230/400 VAC 3Φ input, 6 A continuous / 12 A peak. "NA" = No optional fieldbus card (bare analog/step-dir interface); "ARM9" reference on label indicates ARM9-based processor platform (S300 uses 32-bit RISC CPU). Interfaces via ±10 V analog command, step/direction, or master encoder follow. Supports resolver, incremental encoder, EnDat, BiSS via appropriate feedback card.