Shop

You are here:
  1. Home
  2. Shop
  3. Page 39

GE IS200TTURH1B

Product Name:​ GE Mark VI Turbine Protection Input Terminal Board
Product Introduction:​ The IS200TTURH1B is a Primary Turbine Protection Input terminal board developed by GE for Mark VI turbine control systems, used for overspeed protection, synchronization, and breaker permissive control. The board interfaces magnetic pickup speed sensors, shaft voltage monitoring circuits, generator synchronization signals, and breaker permissive logic within turbine protection architectures.

GE 996D996G1

Product Name:​ GE Mark V/VI I/O Communication Processor Module
Product Introduction:​ The GE 996D996G1 is an I/O communication processor module dedicated to GE Speedtronic Mark V and Mark VI control systems. It undertakes data transmission and communication management tasks between I/O racks and the central processor, serving as the core hub component of the entire control system's data link.

GE DS200SDCIG2AHB15A

Product Name:​ GE DS200SDCIG2AHB DC Power Supply and Instrumentation Board
Product Introduction:​ This board is designed and manufactured by General Electric (GE) for the Mark V series, intended for drive control systems. It reliably distributes power, providing stable DC power for various components within the system. The board features precise instrumentation measurement functions, enabling monitoring and regulation of AC line and DC motor signals.

GE THKM836F000C

Product Name:​ GE THKM 800 A, 600 V, 3-Pole Molded Case Circuit Breaker
Product Introduction:​ The THKM836F000C is a member of GE's TKM/K1200 family of molded case circuit breakers. Based on the THKM836F000 base configuration, it is an 800-amp, 600-volt, 3-pole bolt-on molded case circuit breaker designed for heavy-duty industrial and commercial power distribution. It provides reliable overcurrent protection and is built for high-amperage electrical loads.

GE DS3800NPSJ1B1B

Product Name:​ GE Speedtronic Mark VI Extended-Temperature 120 VAC Input Board
Product Introduction:​ The DS3800NPSJ1B1B is GE's extreme-environment AC digital input module for the Mark VI Speedtronic system. It combines the fast programmable filter from the 1A1A variant with extended-temperature components from the 1B1B design. Released in 2017 for extreme-climate turbine applications, it is the board to install when the ambient is outside the comfort zone of standard NPSJ boards.

GE DS3800NECA1B1A

Product Name:​ GE Speedtronic Mark IV Ethernet Communications Board with Enhanced Diagnostics
Product Introduction:​ The DS3800NECA1B1A is a communication module for GE Speedtronic Mark IV turbine control systems. The "1B1A" suffix reveals a board that has been through multiple field revisions: the first "1" adds the 1 MB memory upgrade, the "B" adds an RS-485 port alongside the RS-232, the second "1" indicates a firmware revision that fixes the packet-loss bug, and the final "A" is the PCB revision with improved power-supply decoupling. This is the most reliable NECA variant and the one to specify when experiencing communication timeouts or HMI freezes.

GE DS3800NPSK1H1F

Product Name:​ GE Speedtronic Mark VI 6U VME 240 VAC Input Board
Product Introduction:​ The DS3800NPSK1H1F is a high-impedance, fast-response AC digital input board belonging to GE's DS3800 NPSK family. It is engineered for extended-temperature turbine applications where standard NPSK boards exhibit optocoupler drift. The "1H1F" revision pairs high-value input resistors, extended-temperature optocouplers, and firmware v1.3F to deliver stable 240 VAC sensing across a -40 °C to +70 °C ambient range.

GE DS3800HMPK1J1J

Product Name:​ GE Speedtronic Mark IV Microprocessor Control Board
Product Introduction:​ The DS3800HMPK1J1J is a microprocessor control board developed by General Electric for the Speedtronic Mark IV gas and steam turbine control systems. The "1J1J" suffix denotes a specific hardware and firmware revision pairing, which is critical for like-for-like replacement and rack compatibility. In a Mark IV card set, this board functions as the main logic and processing module, coordinating data across the backplane and governing the behavior of attached I/O boards.

GE TP1616SS1600

Product Name: Power Break I Series Insulated Case Circuit Breaker
Product Overview: A 1600-amp, 3-pole, 600-volt insulated case circuit breaker from GE's Power Break I family. It plays a crucial role in industrial electrical systems, interrupting the circuit when abnormal conditions such as overcurrent, short-circuit, or ground fault occur, thereby safeguarding connected electrical equipment and the overall power system.

GE IS220PDOAH1A

Product Name: Mark VIe 12-Channel Relay Output Pack (Discrete Output Pack)
Product Overview: A "pack-style" discrete output module used inside GE Mark VIe Speedtronic turbine and compressor control cubicles. It combines 12 relay outputs (Form-C contacts) with an embedded processor and dual 100 Mb Ethernet ports on one card, allowing the controller to drive medium-power field devices without external interposing relays. The pack sits at the "field-actuator" layer, receiving output commands over the I/O Ethernet network, time-stamping the data, energizing the appropriate relays, and returning contact-status feedback to the controller.

GE IS200ESYSH2AAA

Product Name: EX2100e System I/O Dual Board (ESYS H2)
Product Overview: A system interface board designed for GE's EX2100e excitation control system. It provides the interface between customer field signals and the EX2100e control system, handling analog inputs, analog outputs, relay contacts, auxiliary contact inputs, and protection-related signals. The H2 version uses a dual-control arrangement with M1 and M2 control sections, suitable for redundant control paths.

GE 948D872G3

Product Name: Circuit Board (Range Main Electronic Control Board)
Product Overview: The GE 948D872G3 is a circuit board that serves as the main electronic component for a range (cooking appliance). It is responsible for controlling all of the range's functions, including the burners, oven, and digital controls. The board is located behind the control panel at the front of the range.