Shop

You are here:
  1. Home
  2. Shop
  3. Page 373

AMAT 0120-64569

  • Product Name: AMAT 0120 - 64569 Semiconductor Wafer Handling Robot End - Effector
  • Product Introduction: In semiconductor fabs, wafer handling robots are used to transfer wafers between different process stations, storage cassettes, and inspection equipment. The end - effector is the part of the robot that directly contacts the wafer, and its design and performance are crucial for safe and reliable wafer handling.
  • Technical Specifications:
    • Wafer Size Compatibility: Designed to handle specific wafer sizes, commonly 200 mm and 300 mm wafers. It may have adjustable features to accommodate slight variations in wafer diameter or thickness.

AMAT 0110-56802

  • Product Name: AMAT 0110 - 56802 Semiconductor Process Gas Filter
  • Product Introduction: Process gas purity is of utmost importance in semiconductor manufacturing, as even trace amounts of impurities can affect the quality and performance of semiconductor devices. This gas filter is used to remove particulate matter, moisture, and other contaminants from the process gases before they enter the process chamber.
  • Technical Specifications:
    • Filtration Rating: Has a specific filtration rating, usually measured in microns or nanometers, indicating the size of the particles it can remove. For example, a filter with a 0.01 - micron rating can remove very fine particles, ensuring high - purity gas supply.

AMAT 0100-49035

  • Product Introduction: In semiconductor manufacturing, wafer cleaning is a crucial step to remove contaminants such as particles, organic residues, and metal ions from the wafer surface. This cleaning nozzle is designed to deliver cleaning solutions precisely and effectively during the wafer cleaning process, ensuring high - quality cleaning results.
  • Technical Specifications:
    • Nozzle Material: Usually made from high - purity, corrosion - resistant materials such as PFA (perfluoroalkoxy) or PTFE (polytetrafluoroethylene). These materials can withstand exposure to various cleaning chemicals without degradation and do not introduce additional contaminants to the wafer.

AMAT 0090-41267

  • Product Name: AMAT 0090 - 41267 Semiconductor Process Chamber Pressure Transducer
  • Product Introduction: This pressure transducer is a critical component in semiconductor process chambers, used to measure the pressure inside the chamber during various manufacturing processes. Accurate pressure measurement is essential for maintaining proper process conditions, as pressure can affect the chemical reactions, material deposition rates, and etching characteristics in semiconductor processes.
  • Technical Specifications:
    • Pressure Range: Can measure a wide range of pressures, from very low pressures in the millitorr (mTorr) range for high - vacuum processes to higher pressures in the torr or even atmosphere range for some specialized processes

AMAT 0080-33491

  • Product Name: AMAT 0080 - 33491 Semiconductor Wafer Alignment System
  • Product Introduction: This alignment system is an important part of semiconductor manufacturing equipment, used to precisely align semiconductor wafers before various processing steps. Accurate wafer alignment is crucial for ensuring that the processing operations, such as photolithography, etching, and deposition, are performed at the correct locations on the wafer surface, which is essential for the proper functioning of the semiconductor devices.
  • Technical Specifications:
    • Alignment Accuracy: Can achieve high alignment accuracy, typically within ±1 micrometer or better in both the X and Y directions and a small angular deviation

AMAT 0070-25648

  • Product Introduction: This mass flow controller is a key component in semiconductor process gas delivery systems. It is used to precisely control the flow rate of process gases, which is crucial for maintaining consistent process conditions and ensuring the quality and reliability of semiconductor devices. The mass flow controller can accurately measure and regulate the gas flow within a specified range, regardless of changes in pressure or temperature.
  • Technical Specifications:
    • Flow Range: Can handle a wide flow range, from very low flow rates in the sccm (standard

AMAT 0060-17832

  • Product Name: AMAT 0060 - 17832 Semiconductor Wafer Thickness Gauge
  • Product Introduction: This thickness gauge is an essential tool in semiconductor manufacturing for accurately measuring the thickness of semiconductor wafers. Wafer thickness is a critical parameter that affects the mechanical strength, electrical performance, and overall quality of the semiconductor devices. The gauge provides real - time thickness measurements during the manufacturing process, allowing for process control and quality assurance.

AMAT 0040-03799

  • Technical Specifications:
    • Heating Material: Made from high - temperature - resistant materials such as kanthal alloy or silicon carbide. Kanthal alloy offers good electrical conductivity and can withstand high temperatures up to around 1400°C, while silicon carbide can operate at even higher temperatures, up to 1600°C or more, and has excellent thermal conductivity.
    • Power Rating: Has a specific power rating, usually measured in watts. The power rating is determined based on the size of the process chamber and the required heating rate. For example, a small - scale process chamber may use a heating element with a power rating of a few hundred watts, while larger chambers may require several kilowatts of power.

AMAT 0100-00137

  • Product Name: AMAT 0100 - 00137 Semiconductor Wafer Edge Grinding Wheel
  • Product Introduction: This grinding wheel is specifically designed for the edge grinding process of semiconductor wafers. Wafer edge grinding is an important step in semiconductor manufacturing to remove the sharp edges and bevel the wafer edges. This helps to reduce the risk of wafer breakage during handling and subsequent processing steps, and also improves the overall quality and performance of the semiconductor devices.
  • Technical Specifications:
    • Abrasive Material: Made from high - quality abrasive materials such as diamond or cubic boron nitride (CBN).

AMAT 0021-39721

  • Product Name: AMAT 0021 - 39721 Semiconductor Process Gas Filter
  • Product Introduction: This gas filter is an essential component in semiconductor process gas delivery systems. Semiconductor manufacturing processes rely on the use of high - purity gases for various operations such as deposition, etching, and doping. The filter is designed to remove particulate contaminants, moisture, and other impurities from the process gases to ensure the quality and reliability of the semiconductor devices being produced.
  • Technical Specifications:
    • Filtration Rating: Has a high filtration rating, typically in the range of sub - micrometers. For example,

AMAT 0050-21180

  • Product Name: AMAT 0050 - 21180 Semiconductor Wafer Cleaning System Nozzle
  • Product Introduction: This nozzle is a critical component of semiconductor wafer cleaning systems. Wafer cleaning is an essential step in semiconductor manufacturing to remove contaminants such as particles, organic residues, and metal ions from the wafer surface before and after various process steps. The nozzle is responsible for delivering cleaning fluids, such as deionized water, chemicals, or a combination of both, in a precise and controlled manner to achieve effective cleaning.
  • Technical Specifications:
    • Material: Made from high - purity, chemically resistant materials such as polyether ether ketone (PEEK) or special ceramics.

AMAT 3300-11385

  • Product Introduction: This automated robot arm is a key element in semiconductor wafer handling systems. It is designed to precisely and rapidly move semiconductor wafers between different processing stations within a semiconductor fab, such as from load ports to process chambers and between different chambers during multi - step processes. Its high - precision operation and reliability are crucial for maintaining high production yields and minimizing wafer damage.
  • Technical Specifications:
    • Degrees of Freedom: Typically has multiple degrees of freedom, usually 4 - 6, which allow it to move in the X, Y, and Z directions as well as rotate around different axes.